There are 1 repository under lorawan-node topic.
LMIC-node | One example to rule them all. LMIC-node is an example LoRaWAN application for a node that can be used with The Things Network. It demonstrates how to send uplink messages, how to receive downlink messages, how to implement a downlink command and it provides useful status information. With LMIC-node it is easy to get a working node quickly up and running. LMIC-node supports many popular (LoRa) development boards out of the box. It uses the Arduino framework, the LMIC LoRaWAN library and PlatformIO.
LoRaWAN / LoRa P2P library for ESP32 MCUs and the RAK3172 LoRa SoM.
FramI2C is an Arduino library for FRAM (F-FRAM, Ferroelectric RAM) non-volatile memory chips with I2C interface. Supports most common Cypress and Fujitsu I2C FRAM chips with densities of 4, 16, 64, 128, 256, 512, and 1024 kilobits (kb). Provides simple, easy to use read() and write() methods for reading/writing integral and floating point types (uses automatic type inference and byte conversion), readBytes() and writeBytes() for reading/writing larger amounts of data as byte array, and fill() to fill or clear a range of FRAM memory.
A Zephyr RTOS based Lorawan node.
A C# library for LoRaWAN connectivity for RAKwireless RAK3172 Module equipped .NET nanoFramework powered devices.
LoRaWAN Node for Growatt PV-Inverter Modbus Data Interface
C# RAK3172 LoRaWAN library for .NET Core powered devices
C# Seeeduino LoRa-E5 LoRaWAN library for .Net Core powered devices
C# RAK4200 LoRaWAN library for .Net nanoFramework powered devices
C# Seeed LoRa-E5 LoRaWAN library for nanoFramework powered devices
C# Seeed LoRa-E5 LoRaWAN library for TinyCLR V2 powered devices
LoRaWAN Node for Growatt PV-Inverter Modbus Data Interface
The polluTAG home edition, based on SEN54 sensor