There are 0 repository under pulse-oximeter topic.
An open-source handmade smartwatch. All of the codes, PCBs and schematics are available. ⌚
ATTiny85 Pulse Oximeter with Photoplethysmogram (PPG) display
This pulse oximetry shield from ProtoCentral uses the AFE4490 IC to enable your Arduino to measure heart rate as well as SpO2 values.
STM32 HAL library for MAX30102 pulse oximeter and heart rate sensor. Not for clinical use – proceed at your own risk.
Simple SpO2 plotter from scratch for Arduno IDE by reading MH-ET LIVE MAX30102 raw RED/IR data
A demo for the Oximeters with 4.0BLE inside.
Protocol for Bluetooth & USB Oximeters made by Shanghai Berry Medical
This project is MAX3010x library for STM32F4
Hardware repo for the Pulse Oximeter Heart Rate Sensor using Maxim Integrated ICs: the MAX32664 Bio Metric Sensor Hub and the MAX30101 Pulse Oximetry and Heart-Rate Module.
Heart Rate and Pulse Oximeter sensor. a MAXIM HR/SpO2 IC would receive raw data from blood vessels and stores it as raw data. an MPU would interface with it, processes the raw data, and display it on an LCD, and send it to a Bluetooth module to be displayed on a smartphone.
a sample demo for Berry Medical's Oximeter which have Bluetooth Low Energy inside.
Pulse oximeter using Arduino to read and display heart rate and oxygen saturation levels in real-time
Wearable Continuous Pulse Oximeter based on PPG(Photoplethysmography)
In this project when a driver starts the vehicle this vehicle safety system will the check driver's breath using alcohol sensor and analyze that the driver is drunk or not after that in vehicle's start button there will be blood pressure and pulse oximeter sensor which will analyze driver's pulse and oxygen saturation. If the system finds any problem in data it will not start the vehicle and if the system doesn't find any problem in data from the breath analyzer, BP sensor and pulse oximeter it will start the vehicle. There will be a SOS messaging system if any accident occurs, it will send massage to emergency numbers immediately and pin the place where accident occurred using GPS tracking. Also, there will be an eye blink analyzer to detect if he is passed out or not, if there is no eye blinking for 5 or 7 second it will stop the vehicle immediately. This project is developed using Arduino IDE and OpenCV.
A smart First Aid Kit Developed to integrate with Glucolobin Eco-System
A novel IoT Pulse Oximeter to cope with COVID-19 pandemic
Integrated pulse oximeter and heart-rate monitor sensor iot solution
A comparison of pulse sensors for Arduino. It's an enhanced version of tests made with my students for one of their project in 2020.
Thesis project where bracelet to measure pulse and saturation was created. The bracelet consists of MAX30102 pulse and saturation sensor as well as ESP32 microcontroller. Sensor readings gets send from MAX30102 to the ESP32, where pulse and saturation values are calculated and stored in microcontroller SRAM memory.
Stress Level Classification System Using Heart Rate and RR Interval as Features and Decision Tree Algorithms
Arduino library for interfacing with the MAX32664
Firmware for the ReWire pulse oximeter
Android software for visualizing pulse oximeter data
Python code for interfacing with the ReWire pulse oximeter
Windows desktop software that interfaces with the ReWire pulse oximeter
A Pulse Oximeter developed by me using ESP8266