There are 0 repository under mcp23017 topic.
MicroPython driver for MCP23017 16-bit I/O Expander
Library for the MCP23017 and MCP23S17 I/O Expander
Arduino Relay controling sketch with multiple button types (mono-/bi-stable, reed switch), multiple actions (click, double-click, long-click) and MySensors protocol (Serial and MQTT)
Smarthome for Caravans and Motor Homes - System for measuring and displaying various values in caravans and motor homes, including climate values, fill levels and leveling data, energy data, propane/butane sensor. incl. display, config website, test routines, etc. Own circuit board created
MCP23017 8/16-bit I/O Expander (mcp23) with advanced features for linux based systems
MCP23017 implementation for Home Assistant (threadsafe, lower latency and config flow support)
Erriez Arduino libraries
A simple driver for ESP8266 enthusiasts out there to drive MCP23017 16-bit IO Expander
MCP23017 I2C AccelStepper library for Arduino
MCP23017 a 16-Bit I2C I/O Expander with Serial Interface module
Use character liquid crystal display (LCD) in Elixir
Library to access the MCP23017 including interrupts
MQTTany is designed to make it easy to connect hardware on single board computers to your home automation solution.
ST7920_I2C_MCP23017_GLCD Library
MCP23017/08 GPIO expander chip Python module for raspberrypi
An extensive and expandible home automation hardware and software system
Interrupt driven keypad/keyrow library for MCP23017 GPIO port expander
GoLang MCP23017 driver that uses Linux I2C calls
Microchip's MCP23xxx GPIO expander device driver to work with periph
A lightweight Arduino library for the microchip MCP23017 port expander chip
Python based library for talking to character based LCDs.
Makecode Erweiterung für den MCP23017 16-fach digital Port Expander
This is a Node-Red node to communicate with MCP23017 or PCF8574(A) chips on a I2C bus. Both Input + Output.
Adding Digital I/O To Your Arduino Article Resources
Complete support of MCP23017 for Raspberry Pi
bibliothèque pour driver I2C GPIO expander MCP23008 sur Linux Raspberry Pi
An STM32 Black Pill controller for Maltron one handed keyboards based on QMK
A small sample program to create FreeRTOS tasks on an ESP32 (Arduino Framework using PlatformIO) using the Adafruit MCP23017 Arduino Library. The programm creates RTOS tasks to keep Pins on an MCP23017 I/O Expander to a defined state for a certain amount of time.
This is where i try to integrate everything in one project just for fun.
A LinuxCNC HAL user component driving a MCP2301 port expander connected to an i2c bus
"Heron" - Multitrack Raspberry Pi hardware MIDI sequencer