lorawan-device
There are 3 repositories under lorawan-device topic.
- Language:Rust 209
lnlp / LMIC-node
LMIC-node | One example to rule them all. LMIC-node is an example LoRaWAN application for a node that can be used with The Things Network. It demonstrates how to send uplink messages, how to receive downlink messages, how to implement a downlink command and it provides useful status information. With LMIC-node it is easy to get a working node quickly up and running. LMIC-node supports many popular (LoRa) development boards out of the box. It uses the Arduino framework, the LMIC LoRaWAN library and PlatformIO.
Language:C 203ArmDeveloperEcosystem / lorawan-library-for-pico
Enable LoRaWAN communications on your Raspberry Pi Pico or any RP2040 based board. 📡
Language:C 121aws-samples / aws-iot-core-lorawan
Quickly get started with AWS IoT Core for LoRaWAN with sample solutions (binary decoding, device and gateway monitoring, downlink, dashboarding, provisioning automation)
Language:Python 76- Language:Elixir 30
houluy / lora-mote-emulator
This is a device (mote) emulator for LoRaWAN protocol(1.0 & 1.1). Completely realized by Python 3.6
Language:Python 22decentlab / decentlab-decoders
Example payload decoders
Language:Elixir 18hardwario / lora-modem
Open LoRaWAN modem for Murata Type ABZ
Language:C 14Kampi / ESP32-RAK3172
LoRaWAN / LoRa P2P library for ESP32 MCUs and the RAK3172 LoRa SoM.
Language:C++ 13- Language:C 12
FramI2C is an Arduino library for FRAM (F-FRAM, Ferroelectric RAM) non-volatile memory chips with I2C interface. Supports most common Cypress and Fujitsu I2C FRAM chips with densities of 4, 16, 64, 128, 256, 512, and 1024 kilobits (kb). Provides simple, easy to use read() and write() methods for reading/writing integral and floating point types (uses automatic type inference and byte conversion), readBytes() and writeBytes() for reading/writing larger amounts of data as byte array, and fill() to fill or clear a range of FRAM memory.
Language:C++ 9Open-Things-Network / lora-dev-board
Uniwersalna platforma sprzętowa na warsztaty i do prototypowania
Language:C++ 6fthiebolt / neOCampus-arduino
neOCampus Arduino | home of the neOSensors end-devices
Language:C 5cosmic-id / cosmic-lora-aurora
Useful resources for Cosmic LoRa Aurora https://www.tokopedia.com/cosmic-iot/lora-esp32-esp-32-arduino-915-mhz-915mhz-antenna-lipo-charger-lora-aurora-v2
JesseDavids / lorawan-water-tank-meter
This water tank meter, calculates the distance from the sensor to the corresponding level of water inside the tank, sends it off with lora protocols to The Things Network. Once it is in TTN we can retrieve the data into a database or application of your own creation.
Language:C++ 4matthias-bs / LoRaWAN_Node
Hardware design of a solar-powered LoRaWAN node based on ESP32
- Language:C 3
iPAS / Mbed_LoRa_Loadcell
Read weight values from popular different loadcell ADCs: HX711, ADS1232, and ADS1220, then transmit via LoRaWAN network.
Language:C++ 3juanmatola / uc300-payload-utils
JAVA | Payload utils (Encoder/Decoder) for Milesight UC300 IoT Controller for LoRaWAN® Version.
Language:Java 3JAVA | Payload utils (Encoder/Decoder) for Milesight UC50X series IoT Controller.
Language:Java 3kallemooo / rainGaugeLoraWan
Rain gauge connected via Lora Wan
Language:C++ 3KiwiBryn / RAK3172LoRaWAN-NetNF
A C# library for LoRaWAN connectivity for RAKwireless RAK3172 Module equipped .NET nanoFramework powered devices.
Language:C# 3simeononsecurity / helium-DIY-middleman
Code here acts as a middleman between LoRa gateways running Semtech packet forwarders and servers ingesting packet forwarder data
Language:Python 3elcereza / LoRaWAN
Biblioteca para comunicação do módulo LoRaWAN da Radioenge com os microcontroladores compatíveis com a plataforma Arduino IDE
Language:C++ 2C# Seeeduino LoRa-E5 LoRaWAN library for .Net Core powered devices
Language:C# 2- ESP32-LoRa-TTNv3
thorsten-l / ESP32-LoRa-TTNv3
This sample PlatformIO project sends every minute 'Hello LoRa Fcnt=nnn' via LoRaWAN to TheThingsNetwork. It is a test code for TTNv3
Language:C 2 unforgiven512 / Location-Tracking-using-SAMR34-and-UBLOX-GPS-Module
Location Tracking Application (adapted for ttnmapper) on SAMR34 Xplained Pro using a u-blox GPS module (the LEA-6S via the GPS "click board" or NEO-6M as a generic standalone module).
Language:C 2andridge / LORA-MESH-CLOUD-NET-IOT-DEVICES-
AN ADHOCK LORA MESH NETWORK TOPOLOGY USING EXAMPLE SENSOR DATA OF A WEATHER STATION
Language:C++ 1CarletonURocketry / broadcaster
A process to transmit telemetry data over LoRa radio on the QNX Stack using UART communication.
Language:C 1cschorn01 / 2.4GHz_Lora_for_Arduino
Allows for streamlined use of the Semtech sx1280 LoRa Radio over SPI in the Arduino IDE
Language:C++ 1- tbeam-lorawan-mapper
designer2k2 / tbeam-lorawan-mapper
LoRaWan GPS Mapper for TTN and Helium Network, using the TBeam1.2 SX1262
Language:C++ 1 Pacote de instalação automática do Packet forwarder para Raspbian
Language:Shell 1C# RAK3172 LoRaWAN library for .NET Core powered devices
Language:C# 1C# RAK4200 LoRaWAN library for .Net nanoFramework powered devices
Language:C# 1C# Seeed LoRa-E5 LoRaWAN library for TinyCLR V2 powered devices
Language:C# 1myinvent / Dragino-LoRaWAN-LA66-PG1302
Dragino LoRaWAN LA66 example Arduino sketches using Arduino UNO
Language:C++ 1
