blynk-iot-platform
There are 0 repository under blynk-iot-platform topic.
khoih-prog / Blynk_Async_ESP32_BT_WF
Simple WiFiManager for Blynk and ESP32 with or without SSL, configuration data saved in either SPIFFS or EEPROM. Enable inclusion of both ESP32 Blynk BT/BLE and WiFi libraries. Then select one at reboot or run both. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM. Using AsyncWebServer instead of (ESP8266)WebServer.
Language:C++ 9RishitaReddyChilla / IOT-based-Fall-Detection-System
💡 This project proposes an IoT based fall detection and rescue system. The main objective here is to alert the user as well as a guardian/ doctor if there is a possibility of fall.
Language:C++ 94llonsy / sofar_solar
A project that logs data from sofar solar inverter and sends the data to blynk server using RS485 modbus interface.
Language:C++ 8vshymanskyy / blynk-tools
Tools for working with Blynk IoT Platform
Language:JavaScript 8izzarzn / RVCE-Manual
This repository focuses on the IDEA LAB for 1st and 2nd semester students using SST-IoT-Board. Feel free to open PR's
Language:C++ 7MuhammadMooazam / NodeMCU-ESP8266-Series
This repository is for learning NodeMCU (ESP8266).
Language:C++ 7pkarun / Blynk-PZEM-004T-v3.0
Blynk ESP8266 (NodeMCU) Program for PZEM 004T v3.0 Power Meter.
Language:C++ 7sach1027 / IOT-Based-Smart-Cradle-using-ESP8266
Smart cradle using ESP8266, PIR sensor, wet sensor, Mic Sensor and Servo Motor
robert-solomon12 / IoT-Home-Automation-Project
Home Automation based on Blynk server using Raspberry Pi and Relay, Lamp & PIR Sensor. The User will be able to turn on/off a Lamp or any end appliance connected to the Relay with the click of a button on a Smartphone application at will.
Language:JavaScript 6ShahariarRabby / Blynk-Home-Automation
Controlling the lights in your house using your voice is a great way to dip your toes into the smart homeworld. And if you already have a smartphone you can build your own smart switch using a few bucks.
Language:C++ 6Here are the Programs that can be done on a SST IoT Node MCU ESP8266 Board.
Language:C++ 5ISR-based projects demonstrate how to use ESP8266TimerInterrupt, ESP32TimerInterrupt and TimerInterrupt Library
Language:C++ 5maythiwat / node-blynk
✨ Node.js Client for Blynk (Legacy) Mobile App Protocol
Language:TypeScript 5balassy / solar-wifi-weather-station
A solar powered, network connected thermometer implemented with ESP8266, BME280 and Visual Studio Code.
Language:C++ 4DogFeederDevelopers / Dog-Feeder
Arduino / ESP32 Project - Automatic dog feeder
Language:C++ 4gyromike / esp8266-NFC-doorlock-
Arduino project for the ESP8266 -- NFC door locks
Language:C++ 4mohammadtavakoli78 / Internet-of-Things
This is Homeworks of Internet of Things
Language:C++ 4AdrianoGarafulic / Rain-Gauge-Esp8266-NTP-RTC
Using Croduino Nova2 ESP8266, Blynk, Arduino OTA, NTP servers, RTC internal clock and precipitation sensor, a precipitation meter was made. Since the rainfall measurement is reset every day at midnight, the microcontroller needs to know what time it is. Each time the microcontroller is started and connected to the Internet, it pulls the time from the NTP server and starts the internal RTC clock with the obtained time value. Because if the time was constantly withdrawn from the NTP server in case of being left without an Internet network, the rainfall value would not be reseted at midnight, so it only withdraws time from the NTP server once and later relies on the internal RTC.
Language:C++ 3- Language:JavaScript 3
akdaftuar09 / NFT-Hydroponics-System
Optimization (Design and Construction) of IoT based NFT Hydroponics System
Language:C++ 2alksarioglou / medical_bracelet_bachelor_thesis
Development of a portable medical bracelet which combined both heart rate and electrocardiogram measurements transmitted wirelessly to a webpage and a mobile application in real-time
Language:C++ 2- multipurpose-smart-truck
FahimFBA / multipurpose-smart-truck
Electronics Lab Project using Arduino, IOT and necessary sensors
Language:C++ 2 FirezTheGreat / ESP8266-IoT
Home-Automation with Google Assistant requiring, IFTTT and Adafruit, switching on light using phone is also available using Blynk
Language:C++ 2- Language:C++ 2
Enable Blynk support of Teensy boards, especially latest Teensy 4.0, using WiFi, Ethernet, BT/BLE and GSM/GPRS shield
Language:C++ 2- LPG-Leakage-Detector-with-Blynk-IOT
kumaraditya303 / LPG-Leakage-Detector-with-Blynk-IOT
This is Blynk IOT project which monitors the LPG sensor data 500 times, takes the average of sampling to reduce noise, notifies the user of the leakage and sends email.
Language:C++ 2 NaveenkumarBisai / My-project
This is a project which uses esp8266 and arduino UNO along with ultrasonic sensor to detect the distance and send it to blynk mobile app and thingspeak channel.
Language:C++ 2SarthakSKumar / Robofest-2.0-Project-Submissions
Workshop Project Submissions for Robofest 2.0, IEEE RAS PESU. November 2022
Seba0855 / HomeAssistant-app
HomeAssistant android app which works with Blynk IoT devices
Language:Java 2viveeeeeek / smarthome
Control your home devices using this personal home automation app built with Flutter and Blynk API.
Language:Dart 2DanielBustillos / LilyGo-HiGrow-Micropython
Micrpython port of LilYGO Higrow - soil moisture esp32 sensor with connection to iot platform Blink
Language:Python 1dennycw19 / ESP8266-Pakan_Ikan_Blynk
Automatic fish feeder using ESP8266 integrated with Blynk
Language:C++ 1Eviltr0N / Iot-based-smart-home
IoT-based Smart Home system using ESP-32 and Arduino IDE, integrating Blynk Cloud, IFTTT, and Telegram Bot AP
Language:C++ 1math1p / IoT-Thermostat-ESP01S-and-DS18B20
This is a simple smart thermostat project in which the room temperature can be checked with an accuracy of 0.5°C on a smartphone or computer through Blynk. The ESP01S microcontroller is perfect for IoT projects as it has low cost, small size and low power consumption depending on reading intervals.
Language:C++ 1MuhammadRaheelNaseem / IoT_With_Clouds_For_Any_Microcontroller
This GitHub repository contains my cloud connectivity code for IoT devices and applications. It focuses on establishing secure and efficient communication between IoT devices and the IoT cloud network. The code aims to optimize real-time operations, data processing, and storage within the IoT cloud infrastructure.
pabou38 / watering
control garden watering from anywhere, using a phone or tablet. Solar powered. ESP32
Language:Python 1
