There are 1 repository under lcd1602 topic.
LCR meter project. An Inductance, Capacitance and Resistance meter, Arduino NANO(v3) based.
C library to manage the GPIO header of the Nvidia Jetson boards
4 Pin LCD character Library for STM32 HAL
Libraries for STM32 (STM32F103C8T6) on pure CMSIS.
ESP32-compatible example for I2C-LCD1602 Display
ESP32-compatible C library for LCD1602 display via I2C backpack.
Arduino Library for 74HC595 Shift Register using SPI
Projects and libraries for the Microchip PIC 16F1619 Microcontroller ( 8-bit, 20-pin).
Micropython package to control HD44780 LCD displays 1602 and 2004 via I2C
💠 51单片机 - 基于温度补偿的超声波测距系统
Weather fetching through wifi with LCD1602 + Atmega32 + ESP8266
Library to support the HD44780 LCD , (I2C PCF8574 "backpack" interface) for the Arduino eco system
Library for displaying large numbers on LCD with I2C using Arduino
makecode I2C LCD1602 package for microbit
Intro: long time i was harvesting lithium ion batteries from scrap laptop battery packs it's wasn't easy to test battery capacity manually so i made this device to tell me the output volt and current of the battery and calculate the battery capacity and life time Used components : display used in this project 1602 LCD with shift register 74ch595 to save atmega328 pins also there is i2c port on the pcb for who wants to add any i2c module but you have to edit the code to fit your needs for charge and discharge i'm using TIP41C isolated by opto coupler inquick test mode the circuit using 2 1 ohms resistors 1 as shunt and the other as load in charge mode using 1 ohm resistor as shunt for current measuring
Raspberry Pi Pico Library for Liquid Crystal Displays using the I2C protocol
Arduino menu library for LCD displays 16x2 and 20x4
Go library for communicating to lcd1602 from Raspberry Pi
Pi4j-I2C-LCD
Library to support the HD44780 LCD , (I2C PCF8574 "backpack" interface) for the Raspberry PI.
A set of projects and libraries for a Microchip PIC 16F18346 Micro-controller. 20 pin, 8 bit , XC8.
This example shows how to use the LCD1602 I2C display and the HC-SR04 sensor with Raspberry Pi using a multi-threaded approach.
A fast driver for LCD displays on the I2C bus for Pi Pico and Arduino
4x4 keypad working with atmega328p and lcd screen
Born from the fusion of the SerialLCD and the LiquidCrystal I2C Arduino libraries, the LiquidCrystal NKC library is the latest addition to the LiquidCrystal family, enabling simple, yet extensive, universally compatible plug-n-play control of the advanced LCD displays by Longtech & NKC Electronics.
ROS2 node that publish text on a LCD display. Supported displays LCD1604 + LCD2004 displays
CircuitPython library (driver) for the LCD1602 RGB character display over I2C
ESP32 LCD device driver using esp-idf