There are 1 repository under esp8266-esp-12e topic.
This is a Micropython Library from Raspberry Pi Pico to communicate with ESP8266 using AT command over serial UART.
Tapping the 'Tmoney' card to the NFC module displays the remaining balance on the OLED screen, offers the most intuitive way to check the balance on the card.
ESP8266 projects
A serial bootloader utility---using an ESP12E to upload programs to Arduino boards, using the SPIFFS file system.
MQTT ESP8266 "smartifier" doorbell module.
Arduino ESP8266 IoT Service for Displaying the Weather Forecast of South Korea : 한국 기상청 동네예보 정보조회 서비스 사물인터넷(IoT)
Projeto Integrador em Computacao III
A breadboard friendly ESP12E/F breakout with all I/O pins available, flash/reset buttons onboard, and pins ready to use with FTDI modules
Firmware for ESP8266 keyboard with 8 buttons and leds
Anedya Example code for Node MCU
Enable Blynk support of Teensy boards, especially latest Teensy 4.0, using WiFi, Ethernet, BT/BLE and GSM/GPRS shield
How To Connect ESP8266 To Website?
A script for a microcontroller to automatically text me on a button press.
This repository serves code for Automation for electrical devices using ESP8266 on HTTP, WiFi credentials are passed by connecting to it in AP mode.
A Simple WiFI remote controller using the ESP8266 SoC
Smart room using ESP8266 with datalogger
Library to interface MQ-4 gas sensor
Temperature Monitor based with ESP8266 monitorable via Browser
This repository contains the arduino code to monitor air pollution from the environment and save the data on real time bases on the web server and on the SD card tagged with GPS coordinates
General tinkering of the esp2866 wifi module
Water container volume monitor, using ESP8266 Nodemcu v3 Lolin, ultrasound sensor HC-SR04, generic oled display 0,91" 128x32 and PlatformIO Extension on VSCode
Project of ESP12e connected to IoT (ThingSpeak)
Firmware for my board named ESP8266MCU11, based on ESP8266 microcontroller. This device use a MQ-4 gas sensor and use MQTT protocol to send data to OpenHAB Smart Home Automation System.
Firmware for my board named ESP8266MCU12, based on ESP8266 microcontroller. This device use a PZEM-004T board as power meter device and use MQTT protocol to send data to OpenHAB Smart Home Automation System.
Library with common functions for all projects
Library with functions to manage MQTT protocol
shitcode ong
Water leak detector with auto shutoff valve activator to shutoff main valve.
Wrapper for wifi staff in ESP chip
Library with functions to manage PZEM004t power meter board
Library with wifi functions for all projects based on ESP8266
Home Automation Solution uses esp12e wifi module to control the home appliance with any device having wifi card and access to chrome browser.
Programming Wemos Mini D1 with Lua programing using ESPLORER IDE