There are 2 repositories under vesc topic.
A remote used to control an electric skateboard
rESCue - add more safety and control to your VESC based vehicle
BLDC Motor Controller based on the VESC 4.12 hardware
PyVESC is an easy to use and robust Python implementation of the VESC - Open Source ESC communication protocol
Firmware for DAVEga, a device for electronic skateboards that displays data read from VESC based speed controllers.
The VESC 6.0 Lisp implementation of the M365/NineBot BLE compability script
A Esk8 (Electric Skateboard) app that provides realtime and historical data using the HM-10 Bluetooth Module and VESC
An open source, rider-centric cross platform mobile application for VESC compatible ESCs and FreeSK8 devices
A collection of random notes so I don't forget stuff! :)
Add Bluetooth to your Vesc Controller for under 3€
Vesc based Lisp script to use a Ninebot protocol dashboard (either G30 or ES2/ES4 based)
iLogger is an all in one logging solution for Vesc based ESCs. Supports CAN Bus and UART protocols. Powered by ESP-IDF.
BLE dongle for the VESC based on Circuitpython
Interface between a Wiimote, Raspberry Pi 3, and a VESC.
The VESC-BrushlessMotor library allows communication over canbus with the VESC Brushless Controller using an Arduino board. This library provides a simple and easy-to-use interface to control the VESC controller.
A cross platform application created to interface the iLogger modules (https://wavrx.com). Infinity-Tool app connects through BLE to an iLogger device to view and set settings values, provide real-time telemetry viewing of both the electronic speed controller and Battery Management System, and allows remote browsing and streaming of the performance logs recorded on the onboard micro SD card.
Arduino library to interface with the VESC bldc over UART.
Throttle controller to interface an Arduino, ESP32 or Arduino compatible device with a VESC motor controller.
STM32 Ebike controller for the Silicon Valley Clean Energy "Bike to the Future" Ebike Competition
Simple wifi brdige esp32-vesc
Arduino reads from vesc and shows it nicely on a ssd1306 128x64 display via spi
BLE-UART bridge for the VESC with packet handling and VESC Tool compatibility. nrf52840 dongle (PCA10059)
firmware for VESC motor controller for brushless dc motors (bldc)
ESC display and logger
A React Native Mobile Application that displays information of an Electric Scooter (Internship Project)
Software components of the electric conversion of a pocket bike
The PCBasPRO_0002 is an 2*motor controller board in development based on a JLCPCB parts. Ready for VESC6 up to 100V/200A design with individual gate drivers for all three phases. It is powered by an STM32F405 CPU and BLE WT51822_S4AT Capable of running Field Oriented Control at high power/voltages.