There are 2 repositories under microcontroller-firmware topic.
A secure and high performances microkernel for building secure MCU-based IoTs
This repository contains the contribution of an "AUTOSAR Classic Playground" from Da Vinci Engineering GmbH to the open-source community. It has to be considered a continuous work in progress.
JAMA is a device to measure joint angles wirelessly with 9 DOF, using a microcontroller (ESP32) together with an inertial measure unit (GY-80).
ESP32 Test (Arduino IDE - Platformio). This code tests the main functionalities of ESP32 microcontroller.
Driver library for the TM4C123GH6PM Microcontroller
Projects developed using PIC microcontrollers in the discipline of microcomputers in 2017.1 at UFPE (Universidade Federal de Pernambuco).
"Raayan Mini Board based STM32 Controller" Training Material By Kernel Masters
WIP: Funktionsgenerator mit Atmega328 und TFT Display
Here some bare metal codes for arm-Cortex M4 based stm32f446re microcontroller.
Baremetal code to drive SSD1306 OLED Driver connected to an STM32F407 Board through SPI. This code runs without a standard C Runtime environment set by the compiler.
ESP32 Board communicating with a BME680 breakout over I2C and publishing environmental data to an MQTT broker.
I am pratham vora an embedded engineer . I like explore things in the world of embedded devices and explore behind the scenes working of any component to develop things from scratch and push it to the next level .I develop drivers for microcontrollers(ARM) from scratch and at this place you will find all my projects .
DIY ESP-NOW remote control for PC
The NXP (founded by Philips) LPC2148 is an ARM7TDMI-S based high-performance 32-bit RISC Microcontroller with Thumb extensions 512KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP), 32KB RAM, Vectored Interrupt Controller, Two 10bit ADCs with 14 channels, USB 2.0 Full Speed Device Controller, Two UARTs, one with full modem interface. Programming LPC 2148 using Keil IDE Legacy support
Toolset for profiling energy consumption of MCU based platforms
This is a Project is all about building bare-metal firmware for a Cortex-M4 STM32 microcontroller, using open source tools and libraries such as GCC and libopencm3. This starts from blinking an LED, to building a bootloader for performing firmware updates over UART/USB, to building a signed firmware security mechanism.
Una infraestructura libre (O/S) de herramientas, técnicas y configuraciones que nos permita desarrollar software embebido de calidad, con facilidad de replicación, modularidad y con un proceso de desarrollo establecido.
This is a Pic16F18324 emulating software, useful for unit testing on x86 platform without need of the specific microcontroller. It is being currently developed as a way for me to develop my understanding of MCU Architecture and memory mapped IO.
Componente Hardware e Software para Turbinas Tesup carregarem baterias de 12V.
Implementação do Dispositivo Autorizador Fiscal (DAF) em um microcontrolador seguro
Wireless alarm system using ESP-NOW
Electra IOT is an sample implementation of a home automation system. Here you can find the Codes used for the microcontrollers used in the project.
Yet another "easy" and fun development platform based on ATmega32U4 with USB PD protocol support and many other on-board goodies!
This repo contains project - project about Embedded Electronics System Course when I was in college
Took a module on Microcontroller Programming using Assembly Language during my year 2 undergraduate in the National University Of Singapore. All the labs and project are a part of this module.
Roboracer Alpha Mu™ firmware for autonomous vechicle robots
MAX485 gateway
Bare metal Firmware for the ATMega328P (Audrino Uno)
The programs for ESP32 using FreeRTOS and IDF.