There are 3 repositories under stm32f446re topic.
Grbl-Advanced is a no-compromise, high performance, low cost alternative for CNC milling. This version of Grbl runs on a STM32F411RE / STM32F446RE Nucleo Board. Now with backlash compensation, multi-axis and Tool Table support!
JBC_SolderingStation
Device communication through RS-485 Modbus-RTU with CRC16 and HMI display for STM32
STM32F446RE-NUCLEO STemWin demo 320*240px LCD ILI9341 driver
BLDC Controller using STM32 Nucleo board and X-NUCLEO-IHM08M1
Basic examples of STM32 ARM bare-metal programming. No high level libraries or IDE. Pure C. It's still in progress.
O projeto Estufa Automática tem por objetivo desenvolver três estufas, medindo e atuando sobre a temperatura, luminosidade e umidade do solo. Essa implementação fará uso do protocolo MQTT, tornando as estufas em objetos virtuais para IoT, o que permitirá um controle à distância das estufas (que estarão colocadas em duas cidades) e,além disso, permitirá uma análise de consumo por parte de cada estufa à partir do consumo medido nas. Dessa maneira, cria-se a possibilidade de identificar falhas na aplicação, qual estufa obteve menores gastos e criar alertas em caso de defeitos.
VS1053/63 STM32 Example
Firmware for testing I2C communication with an ESP32-based I2C slave.
This repository host the firmware based on HAL library and using STM32CubeIDE as the IDE for reading the internal temperature sensor using ADC.
Here some bare metal codes for arm-Cortex M4 based stm32f446re microcontroller.
A template to build arm cortex-m4 (STM32F446RE)
Here i post programs for STM Boards
STM32F446 communicate with IS25LP128F flash chip using SPI with baremetal programming
SSD1306 OLED Controller Driver for STM32F446xx MCUs.
A custom bootloader for STM32F446 MCU, based on STM32CUBE HAL.
STM32 ARM Cortex M4 Microcontroller- Basic Exercises using STM32 Nucleo-64 development board with STM32F446RE MCU with Arduino Uno V3 connectivity support
This project discusses implementation of deep learning model deployment for vibration prediction of motor
An experimental telemetry module for model rockets.
This repo contains implementation of HAL on STM32F446RE
With this repository, I want to demonstrate how to set up a project to program an STM32F446RE board without using STM32CubeIDE.
NUCLEO-STM32F446RE: Internal Temperature Sensor, Vrefint, ADC, DMA, Timer, PWM
The Bosch BMP280 temperature and pressure sensor is connected to an STM32 microcontroller using low-level register-based programming via two distinct protocols: I2C and SPI. The sensor's data is then showcased on a 16x2 LCD display, which is also linked to the STM32 microcontroller.
STM32F446Re_UART_Communication (Baremetal)
STM32-NUCLEOF446RE Microcontroller Based drivers