medical-device
There are 5 repositories under medical-device topic.
YaelBenShalom / Motorized-Prosthetic-Arm
Designing, building and controlling a motorized prosthetic arm
Language:Jupyter Notebook 13ceidas / Biomedical-Signal-Processing-Project
This project was completed in 2018 as a part of my postgraduate studies in Biomedical Engineering
Language:MATLAB 12MeindertN / RoboClerk
A documentation automation system for SaMD and medical device software. Documentation-as-code for ISO62304 compliant development processes.
Language:C# 8brunobpr / Bio-Protech-Project
Smart Wearable Device for Reduction of Parkinson’s Disease Hand-Tremor
Language:Python 5nmstreethran / paper-based-microfluidics
My undergraduate honours project on paper-based microfluidics for animal disease detection
This project was completed in 2018 as a part of my postgraduate studies in Biomedical Engineering
Language:MATLAB 3- Cerberus-Multivent
tgh-apil / Cerberus-Multivent
Emergency Ventilator-Sharing System. A system using standard ventilation circuit parts and localy-manufacturable custom components to allow the use of a single ventilator to support two patients with independent control of tidal volume, FiO2, and PEEP for each patient.
Language:JavaScript 3 axr6077 / DragonHeart-BiVAD
Source for the controller interface for BiVAD project on the BeagleBone Black. This repository will contain testing programs and any other peripheral functionality required by testing or updated by Customer Requirements.
Language:C 2niplabdata / auto-raa-pub
Automated Reactive Accelerated Aging for Rapid In Vitro Evaluation of Neural Implants Performance
Language:Python 2ahmedhosny / compression-paddle
A handheld external compression device to facilitate computed tomography (CT)-fluoroscopy-guided percutaneous interventions in the abdomen.
Language:JavaScript 1sonali810 / Electrospinning-Syringe-Pump
This project creates a simple electrospinning syringe pump that incorporates an Arduino and motor.
Language:C++ 1zfatmi13 / gesture-detection
The objective of our project is to use electromyography (EMG) in order to classify different hand gestures. EMG is a technique for evaluating and recording the electrical activity produced skeletal muscles. We used double channel surface electrodes to record EMG, with 3 electrodes per channel, one for ground and 2 for the differential input. We have used two channels as we are acquiring EMG for two different muscles, the flexor carpi ulnaris and the extensor carpi ulnaris. We have achieved two goals in our project: non-real time as well as real-time gesture detection. For non-real time gesture detection, we used BIOPAC to do the EMG recording and then imported the files into MATLAB, where we designed an algorithm to detect the gestures based on the features of the signal. When doing real-time gesture detection, we record EMG using a circuit. The circuit preamplifies the input signal, filters the resultant signal to keep the frequencies that are in the range of EMG, and removes the 60Hz noise. The output signa
Language:MATLAB 1kosidinma / MRes_Project-Java-and-Embedded-C
Project code for my MRes research. It involves sensors using the Nordic BLE chip, android app development and embedded system programming in C. These collaborated together and also with matlab to design a system for STO2 sensor validation, calibration and testing with regards to monitoring Diabetic Peripheral Neuropathy. Basically medical device design and tesing.
Language:HTML 0- 0
mosew / tac-research
Ph.D. research on transdermal alcohol content
Language:MATLAB 0PatrickBMaloney / MediBand
🏆 BrickHack 2020 Winner: NFC patient bracelet and scanner system for first responders. Provides EMS with instant access to crucial patient information.
Language:TypeScript 0This project creates a simple urinary catheter that incorporates a distance sensor and water sensor.
Language:C++ 0srustisane / tms-device
Wearable Transcranial Magnetic Stimulation (TMS) for Alzheimer's Disease
0tonilgdev / FinalMasterThesis_LopezGimenez
This repository contains the code and documents for my master’s thesis “Assessment of the accuracy and reliability of heart rate and blood oxygen saturation measurement in wearable devices". The thesis was written by Antoni López under the supervision of Juan José Ramos Castro at the Polytechnic University of Catalonia.
Language:Java 0gjbsaiia / medicalAlarmGen
Generates medical device alarms as .wav files according to FDA standards
Language:Pythonjuniajacinto7 / Fresno-Neuro-Android-Application
Patients with chronic pain or other neurologic conditions frequently note that their symptoms vary with environmental conditions. This includes heat and light but also, body position and level of activity. It would be useful for the patient and their physician to know how these factors their main symptoms such as pain, fatigue, or weakness.
Language:Kotlinmarius12233 / Pulse-Oximeter-system
Implementation of a PulseOximeter system on embedded platform STM32
Language:Cpersephonepunch / survey-uikit
Vue / Vue Formulate-Validation, wrapped in 11ty and webhooks to API CRUD managers and live update CRM tool workflow
Language:HTMLTylerAdamMartinez / Minimally-Invasive-Monocusp-Valve
BMEN 3310 (Engineering Measurements from Human Systems): Takes in data from an external hall sensor that reads each time the Minimally Invasive Monocusp Valve open and closes, and preforms calculations to determine the state of the patient.
Language:C++
