BuildAzure / AdafruitBME280WeatherStation

Measure Temperature, Humidity and Pressure using Adafruit BME280 and Windows IoT Core

Adafruit BME280 Weather Station

The full writeup and instructions for the Weather Station V 3.0 project can be found over at Hackster.io.

Required Hardware

• Raspberry Pi 2 or 3
• Adafruit BME280 I2C Temperature Humidity Pressure Sensor
• Breadboard
• Male / Female Jumper Wires

Required Software

• Microsoft Windows 10 IoT Core
• Microsoft Visual Studio

Dependencies

This project utilized the BuildAzure.IoT.Adafruit.BME280 library and Nuget repository to communicate with the Adafruit BME280 Temperature, Humidity and Barometric Pressure Sensor from the Raspberry Pi.

Wiring Diagram

Attribution

This project is based on the Weather Station V 2.0 project on Hackster.io.