seeeduino-xiao
There are 1 repository under seeeduino-xiao topic.
- beyblock20
ChrisChrisLoLo / beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
Language:Python 320 slviajero / tinybasic
A BASIC interpreter for Arduino, ESP, RP2040, STM32, Infineon XMC and POSIX with IoT and microcontroller features.
Language:C 253- one
ergonautkb / one
Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.
Language:Shell 173 w84death / smolOS
smolOS - a tiny and simple 🧪 research ⚙️ operating system ⌨️ written in 🐍 MicroPython for microcontrollers giving user a POSIX-like 📁 environment and 🧰 tools to play.
Language:Python 166- dust
khoih-prog / FlashStorage_SAMD
The FlashStorage_SAMD library provides a convenient way to store and retrieve user's data using the non-volatile flash memory
Language:C++ 32designer2k2 / xmas-tree
XMAS Tree from stacked ws2812 rings driven by a Digispark
Language:C++ 28BOlaerts / ESPHome-W5500-Ethernet-on-ESP32-boards
Home Assistant integration using ESPHome on a different ESP32 boards with W5500 ethernet and I²C bus
Wrapper of FS (LittleFS or not-advisable FATFS) for Arduino MBED nRF52840-based boards, such as Nano_33_BLE boards. This library facilitates your usage of FS (LittleFS or FATFS) for the onboard flash. FS supports power fail safety and high performance
Language:C++ 12KaiyoFox / waveshare1.28-rp2040-smartwatch
Smartwatch using a Waveshare rp2040 1.28" round display, and a Seeed XIAO BLE nrf52840
Language:C++ 10Alpaca-zip / icm_20948
ROS/ROS2 package for the ICM-20948 with Seeeduino XIAO.
Language:C++ 92b-t / esp32s3-microros
Example of how to stream camera data from a Seeed Studio Xiao ESP32-S3 Sense to ROS 2 using micro-ROS
Language:C 7botamochi6277 / Feetech-microros
Seeeduino XIAO control feetech ttl servo motors with micro-ROS interface.
Language:C++ 6idreamsi / E5MAT
📌 LoRa GPS Tracker using Grove LoRa-E5 and the possibility of real-time tracking on the map
Language:C 6- Language:C++ 5
franklinscudder / Midi2PO
A device that takes MIDI clock in and outputs 1v pulses at PPQN intervals compatible with a range of devices including Korg volcas and Teenage Engineering pocket operators.
Language:C++ 5raycardillo / automatic-gbg-texture-creator
Automatic Texture Creator for Game Builder Garage
Language:C++ 5Seeeduino XIAO BLE Sense Streaming IMU Data with Bluetooth Low Energy
Language:C++ 4charkster / samd21-i2c_slave
This implements an i2c slave with a register map of 256 bytes in sram. The slave supports multi-byte writes and reads. It uses the "Wire" library.
Language:C++ 4- MacroKeyboard
UserR00T / MacroKeyboard
Seeeduino-based, 3D printed, mechanical macro keyboard
Language:C++ 4 This library enables you to use Hardware Timers on SAMD21/SAMD51 boards to create and output PWM to pins. These PWM channels, using SAMD21/SAMD51 Hardware Timers, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. Max PWM frequency is limited at 1000Hz
Language:C++ 3PirateLab / ipad-switch-Seeeduino-XIAO
This setup allow you to make a usb switch with an Seeeduino XIAO for your Ipad. I use it with Switch Control to navigate your iPhone, iPad, or iPod touch (iOS)
Language:Python 3- Language:C++ 2
krukmat / SmartBott
This project utilizes a Seeed Studio XIAO board based on the nRF52840 chipset, along with a VL53L0X sensor, to create a smart bottle counter. The code provided in main.ino implements the functionality of the smart bottle counter.
Language:C++ 2adviksinghania / jump-yo-rex
A repo for my project Jump Yo' Rex made using Seeeduino Xiao (running CircuitPython) and LIS3DH accelerometer.
Language:Python 1A Line Follower Robot made using Seeeduino Xiao, running CircuitPython/Arduino
Language:Python 1cat-in-136 / xiaolu_kbd
Small 4x4 self-build DIY keyboard powered by Seeed Xiao
Language:C++ 1Arduino library DAC control using a serial (USB) terminal
Language:C++ 1This arduino code for SAMD21 will record a gpio's high and low duration for multiple pulses.
Language:C++ 1chrisb2 / crsf-gps-speed
Sensor which reads from a GPS module and sends telemetry values using the CRSF protocol, which can be consumed by an appropriate ELRS radio control receiver.
Language:C++ 1mhschmall / Esp32-Blog-Server
Simple blogging platform that runs on an ESP32
Language:HTML 1pedr0sorio / real-time-eeg-processing-display
Real-time EEG signal processing and display in MATLAB.
Language:MATLAB 1SarahBass / LiteBrite-MicroPython-Seeed
A quick project using Seeed RP2040 and a Lite Brite
Language:Python 1- Language:C++
