blynk-server
There are 0 repository under blynk-server topic.
khoih-prog / Blynk_WM
Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime, with or without SSL. Configuration data saved in either SPIFFS or EEPROM.
Language:C++ 47- Language:JavaScript 35
Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.
Language:C++ 22- Language:C 21
Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at runtime. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. Multi or Double DetectDetector feature permits entering Config Portal as requested.
Language:C++ 20pkarun / Blynk-Flow-Sensor-Water-Meter
Blynk flow sensor water meter to measure water consumption using Blynk, NodeMCU and Water Flow Sensor (I used YF-S201B).
Language:C++ 16Enable inclusion of both ESP32 Blynk BT / BLE and WiFi libraries. Then run both WiFi and BT/BLE simultaneously, or select one to use at runtime after reboot. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM.
Language:C++ 13RishitaReddyChilla / IOT-based-Fall-Detection-System
💡 This project proposes an IoT based fall detection and rescue system. The main objective here is to alert the user as well as a guardian/ doctor if there is a possibility of fall.
Language:C++ 94llonsy / sofar_solar
A project that logs data from sofar solar inverter and sends the data to blynk server using RS485 modbus interface.
Language:C++ 8vshymanskyy / blynk-tools
Tools for working with Blynk IoT Platform
Language:JavaScript 8izzarzn / RVCE-Manual
This repository focuses on the IDEA LAB for 1st and 2nd semester students using SST-IoT-Board. Feel free to open PR's
Language:C++ 7Blynk ESP8266 (NodeMCU) Program for PZEM 004T v3.0 Power Meter.
Language:C++ 7ShahariarRabby / Blynk-Home-Automation
Controlling the lights in your house using your voice is a great way to dip your toes into the smart homeworld. And if you already have a smartphone you can build your own smart switch using a few bucks.
Language:C++ 6titenko / GeekHub-Blynk-Server
Платформа с приложением для iOS и Android для управления Arduino, ESP8266, Raspberry Pi и других плат микроконтроллеров через Интернет.
Here are the Programs that can be done on a SST IoT Node MCU ESP8266 Board.
Language:C++ 5migueltc13 / HC-SR04
Basic sensor alarm system made with ESP8266 and HC-SR04.
Language:C++ 4theOracle1984 / DHT22-humidity-controlled-relay-working-with-Wemos-D1mini
Wemos D1mini and DHT22 control relay for Bathroom ventilator
Language:C++ 3This repository focuses on Programs that can be achieved using SST IoT Development Board which is an ESP32 Development Kit
Language:C++ 2jaminNZx / ESP8266-Blynk-Gate-Logger-And-Counter
An advanced Gate or Door counter and logger.
Language:C 2librarysteve / installblynkpi
Install the Blynk server on Raspberry Pi
Language:Shell 2NAVEENDATAANALYST / SMART-AGRICULTURE-SYSTEM
This is my 3rd year IOT project. Me and my team worked on this project, and we implemented it successfully.
Blynk PZEM 004T 3 Phase failure motor automation.
Language:C++ 2Denny9700 / BlynkSharp
Simple Http Restfull API for Blynk
Language:C# 1Eviltr0N / Iot-based-smart-home
IoT-based Smart Home system using ESP-32 and Arduino IDE, integrating Blynk Cloud, IFTTT, and Telegram Bot AP
Language:C++ 1gablau / blynk-server-binaries
This repository is my personal collection of all legacy server binaries released by Blynk
This is the library, designed to help you eliminate hardcoding your Blynk credentials in Mega 1280, Mega 2560, Mega ADK, Teensy, SAM DUE, SAMD, RP2040-based, etc. boards using with Ethernet shields (W5100, W5200, W5500, ENC28J60, etc).
Language:C++ 1malpraku / BlynkServer-Mac
A simple ported version of Blynk Server into the Macintosh system. Will automate the process of starting the server instead out of Terminal.
Language:HTML 1- Language:Dockerfile 1
Stalker-moment / TeleBot-Bin
Chatbot Telegram can control IoT via API/endpoint
Language:JavaScript 1Susmit10 / LPG-Gas-Leakage-Detection
LPG Gas Leakage Detection and realtime monitoring using Blynk platform along with alert notifications.
Language:C++ 1zaheenadeep / dMali
A smartphone-controlled automated gardening system built using Arduino and Blynk.
Language:HTML 1- Language:C++ 0
- Language:C 0
TheBumpaster / blynk-server
Dockerized Blynk Server
Language:Shell 0DanMM7 / Traffic_light
C++ Embedded system application with Blynk mobile App.
Language:C++
