433

There are 0 repository under 433 topic.

• nagyrobi / home-assistant-custom-components-cover-rf-time-based

  Time-based cover with customizable scripts or entity to trigger opening, stopping and closing. Position is calculated based on the fraction of time spent by the cover traveling up or down. State can be updated with information based on external sensors.

  home-assistantcovertriggerrf433433mhzscriptserviceshutterroller-shutters
  Language:Python 76

• tunjid / Android-Home-Hub

  Android Home Automation Hub with support for ZigBee And 433 MHz RF devices

  433androidandroid-gatt-clientarduino-gatt-serverhome-automationkotlinnsdrf-transceiverrf-transmittersnifferzigbeezigbee-dongles
  Language:Kotlin 28

• Yurik72 / ESPHomeController

  Generic IOT platform for Home Automation based on ESP8266/ESP32

  433applebuttondimeresp32esp8266espasyncwebserverhomeiotkitldrlightnativereactjsrelayrgbsnifferswitchwebws2812
  Language:C 25
• PiFunk

  wodowiesel / PiFunk

  PiFunk Radio Transmitter - with FM/AM-Modulation for HAM-Bands (CB 27 & PMR 446)

  radiopmrcbfrequencyfmamham-radiopiraspberry-piwavcallsigngpio-pinsantenna43370cm-uhf-band70cmtransmitteri2cgpsc
  Language:C 19

• HappyPaul55 / 433-remote-automation

  A dirty, but easy, way to capture and replay 433mhz messages

  433433mhzraspberry-pi
  Language:Python 15

• pedrxd / MinModUrT

  The unofficially supported ioquake3 engine by pedrxd for the game Urban Terror 4.2/4.3

  4243433colournamesgameinfinitestaminainfinitewalljumpsmodnofalldamagequakeserverurbanterrorurt
  Language:C 9

• c-klinger / node-raspi-rcswitch-api

  RESTful API for the node-rcswitch binding based on Node.js/restify.

  rpiraspberrypircswitch433433mhzrfwirelesspoweroutletrestrestfulapihomeautomation
  Language:JavaScript 7

• mrohner / 433MHz-MQTT-Bridge-with-Wemos-D1

  Use wall mount switches that trigger MQTT commands

  433433mhzesp8266mqttwemos
  Language:C++ 7

• DavidLP / pilight

  A pure python client to connect to a pilight daemon. Sendind and receiving commands can be asynchronous.

  433pilight
  Language:Python 5

• IoTDevice / serial-315-433

  串口型315,433模块使用esp8266连接wifi远程控制

  315433arduinoesp8266iotserial
  Language:C++ 3

• Guru-RF / LoRa433APRSTracker

  RF.Guru High power LoRa APRS Tracker for automobile use, 433mhz 500mW 13.8v

  433aprsaprs-trackercircuitpythonham-radiolorarp2040
  Language:Python 2

• eriks5 / com.leds-c4

  Homey support for LEDS-C4 Ceiling Fans

  433homeyleds-c4
  Language:JavaScript 1

• fotoamg / GPS_locator_OLED_GNGGA

  GPS NMEA offline drone locator using Arduino, display, internal GPS and remote tracked GPS through radio

  gpslocatornmeaarduinooledlcd433433mhzbluetoothandroidlong-range
  Language:C++ 1

• poespas / arduino-mqtt-to-433mhz

  Send a 433mhz packet whenever an mqtt message gets received

  433433mhzarduinodoorbellhomeassistantmqttrf
  Language:C++ 1

• scr34m / 433_receiver

  ATTINY13A 433MHz receiver

  433433mhzattinyattiny43aavr
  Language:C 1

• zipou / espgw

  433rfesp8266arduino
  Language:C++ 1

• koenekelschot / HomeWizard.Net

  A .net package to get the communications going with a HomeWizard. You can use this package to control switches/dimmers and read all the data from the HomeWizard.

  homewizard433mhz433
  Language:C#

• latchdevel / NewRemoteSwitch

  NewRemoteSwitch library for Arduino. Made by Randy Simons

  433433mhzaskook
  Language:C++

• latchdevel / RemoteSensor

  RemoteSensor library for Arduino

  433433mhzaskook
  Language:C++

• latchdevel / RemoteSwitch

  RemoteSwitch library for Arduino

  433433mhzaskook
  Language:C++

• tispokes / raspberry-remote-ipv6-dimming-32bit

  433 MHz daemon, forked from xkonni. Support: Dimming Plugs, 32bit Hard-coded code, IPv6

  raspirasp43332bit433mhzipv6ipv4arduinosmarthome
  Language:C++