There are 1 repository under teensy-lc topic.
A full-featured DMX library for Teensy 3, Teensy LC, and Teensy 4. "Programmable DMX and arbitrary USB serial device emulation."
DIY 60% split keyboard, 3D-printed and hand-wired
Keyboard firmware for Teensy 3.2 and Teensy LC
HomeAssistant integration for Friedrich air conditioners
A MIDI + MIDIoverUsb configurable Drawbars controller built using Teensy LC
This library enables you to use ISR-based PWM channels on Teensy boards, such as Teensy 2.x, Teensy LC, Teensy 3.x, Teensy 4.x, Teensy MicroMod, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is they're ISR-based PWM channels, supporting lower PWM frequencies with suitable accuracy. Their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These ISR-based PWMs, still work even if other software functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software-based PWM using millis() or micros(). That's necessary if you need to control devices requiring high precision
Maintained fork of https://sourceforge.net/p/teensy-3-x-rammonitor
Enable Blynk support of Teensy boards, especially latest Teensy 4.0, using WiFi, Ethernet, BT/BLE and GSM/GPRS shield
The Teensy LC (Low Cost) Challenge
Not a real project - part of a demo for managing manufacturing files
A small board with 10 power outputs driven from FETs configured as high side switches and controlled by a Teensy LC
Simple demo project to make a LED blink on a Teensy LC, built using PlatformIO
Teensy PS2 Controller Interface
Test most (not all) of the GPIO pins on a Teensy LC board