There are 3 repositories under cubeide topic.
JBC_SolderingStation
STM32 graphics LCD and Touchscreen drivers (LCD: st7735, st7781, ili9325, ili9328, ili9341, ili9488, Touch: analog resistive, xpt2046, stmpe811)
W25Q128 External Loader for STM32H7
GPS Tracker with GSM connection, logging to SDcard, sending data to mqtt server
STM32 Casks & Formulae (not official)
Quadruped Robot – It is a four-legged walking robot that is a bionic replica of a spider (Arachnid species) that uses its legs for movement and can perform some tasks either by human interaction or on its own.
An alarm clock is done with RTC in STM32F103R6 board. It is simulated in proteus.
O projeto Estufa Automática tem por objetivo desenvolver três estufas, medindo e atuando sobre a temperatura, luminosidade e umidade do solo. Essa implementação fará uso do protocolo MQTT, tornando as estufas em objetos virtuais para IoT, o que permitirá um controle à distância das estufas (que estarão colocadas em duas cidades) e,além disso, permitirá uma análise de consumo por parte de cada estufa à partir do consumo medido nas. Dessa maneira, cria-se a possibilidade de identificar falhas na aplicação, qual estufa obteve menores gastos e criar alertas em caso de defeitos.
Example USB Mass Storage Device Class stm32f103 + w25q32
An air conditioning system is done with STM32F107 board as final project for embedded system course.
ST Electronics ARM based MCU's examples and documents.(Mostly STM32F103C8 used in this repository)
STM32_aLED_WS2812B_Controller is a project that uses a STM32F446RE ARM Cortex M4 microcontroller to drive a 16x16 LED matrix consisting of WS2812B LEDs. The controller uses PWM and DMA channels for control using a NZR protocol that was implemented. The driver remembers its state after power loss thanks to FLASH memory implementation.
STM32 HAL kütüphane örneklerinin github markdown sayfasıyla anlatımı.
This is repository of our EEE 416 course project. In this repository, we organized our project files including all the necessary codes, simulation, PCB files.
WS2812 DMA library with low RAM needs. Up to 16 paralel outputs and thousands of LEDs on each of them
Building quadcopter with STM32CubeIDE and closed hardware board.
Simple web server on STM32F407 and LAN DP83848
An stm32 game ( Arrow and the fish )
Line Follower using a HDD BLDC motor for STM32F446-Nucleo.
MCU-1 : Bare metal driver development using Embedded C - Writing drivers for GPIO,I2C,SPI,USART Peripherals
Embedded C Programming
library to easily use the UART port in STM32
An embedded system project controlling a DC fan based on the ambient temperature. This project utilizes a Nucleo G031K8 microcontroller.
Мини-библиотека для работы с WiFI модулем ESP8266 на FreeRTOS
Basic configuration on CubeIDE for the Adafruit STM32 Feather Expresss board.
Two Small projects based on dealing with STM32L4
The files written during studying LwIP and ethernet for stm32F407 microcontroller
STM32 HAL driver for MCP23008 I2C 8-channel port expander
temperature and humidity sensor reading project
Приложение для платы на микроконтроллере STM32F7 с дисплеем