nucleo-144

There are 0 repository under nucleo-144 topic.

• khoih-prog / EthernetWebServer_STM32

  This is simple yet complete WebServer library for STM32 boards running built-in Ethernet LAN8742A (Nucleo-144, Discovery), ENC28J60 or W5x00 Ethernet shields. The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Ethernet_Generic library is used as default for W5x00. Now W5x00 can use any custom hardware / software SPI

  ethernetethernetwebserverstm32nucleo-144webserverstm32f4stm32f7http-serverhttp-clientudp-serverudp-clienttcp-servertcp-clienttcp-socketenc28j60w5x00lan8720lan8742aethernet-genericcustom-spi
  Language:C++ 81

• khoih-prog / STM32_TimerInterrupt

  This library enables you to use Interrupt from Hardware Timers on an STM32F/L/H/G/WB/MP1-based board. These STM32F/L/H/G/WB/MP1 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.

  timingdevicecontroltimerinterruptstm32mission-criticalprecisenon-blockingisrstm32f7stm32f4stm32f3stm32f1nucleo-f767zinucleo-144hardware-timersaccuracystm32l5stm32h7
  Language:C++ 32

• khoih-prog / EthernetWebServer_SSL_STM32

  EthernetWebServer_STM32 is a library for STM32F/L/H/G/WB/MP1 boards running WebServer using built-in Ethernet LAN8742A, Ethernet LAN8720, W5x00 or ENC28J60 shields. It now supports Ethernet TLS/SSL Client. The library supports HTTP/HTTPS GET and POST requests, provides argument parsing, handles one client at a time. It supports Arduino STM32F/L/H/G/WB/MP1 series with 32+ Kbytes of Flash, using built-in Ethernet (Nucleo-144: F429ZI, F767ZI, Discovery: STM32F746G-DISCOVERY), or ENC28J60, W5x00 Ethernet shields. Ethernet_Generic library is used as default for W5x00. Now W5x00 can use any custom hardware / software SPI

  ethernetwebserver-librarystm32http-clientstm32f4stm32f7enc28j60lan8742alan8720w5x00nucleo-f767zinucleo-144websocketstcp-serversslssl-webclientssl-certificatesudp-clientethernet-genericcustom-spi
  Language:C 14

• khoih-prog / STM32_PWM

  This wrapper library enables you to use Hardware-based PWM on STM32F/L/H/G/WB/MP1 boards to create and output PWM to pins. The most important feature is they're purely hardware-based PWM channels. Therefore, their executions are very precise and not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware PWM channels still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other ISR-based or software-based PWM using millis() or micros(). That's necessary if you need to measure some data requiring very high frequency and much better accuracy. PWM feature can now be used.

  isrpwmpwm-drivernon-blockinghardware-pwmstm32duty-cyclepwm-frequencymulti-channel-pwmhardware-based-pwmhigh-frequency-pwmstm32f7stm32h7stm32l5stm32gstm32wbstm32f103nucleo-144stepper-motor-controlstepper-motor-driver
  Language:C 9

• khoih-prog / Ethernet_Manager_STM32

  Library for configuring/auto(re)connecting W5100/W5200/W5500, ENC28J60 and built-in LAN8742A / LAN8720 Ethernet at runtime using Config Portal. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. DoubleDetectDetector is used to force Config Portal opening even if the Credentials are still valid. Ethernet_Generic library is used as default for W5x00

  credential-managerenc28j60ethernetethernet-genericethernet-managerethernet-webserverlan8720lan8742amqttnucleo-144stm32stm32f4stm32f7thingstreamw5x00wiznetconfig-portaldynamic-parameters
  Language:C++ 7

• khoih-prog / AsyncDNSServer_STM32

  Asynchronous DNS Server Library for STM32 using built-in LAN8742A Ethernet

  stm32lan8742adns-serverdnsasynchronousasync-functionsasync-servernucleo-f767zinucleo-144
  Language:C++ 2

• khoih-prog / STM32_ISR_Servo

  This library enables you to use 1 Hardware Timer on an STM32F/L/H/G/WB/MP1-based board to control 16 or more servo motors.

  devicecontroltimingstm32servoisrisr-basedhardware-timerstm32f7stm32lstm32h7stm32g4nucleo-144non-blockingprecisionstm32f4stm32f1
  Language:C 2

• khoih-prog / STM32_Slow_PWM

  This library enables you to use Hardware Timers on STM32F/L/H/G/WB/MP1 boards to create and output PWM to pins. The most important feature is they're purely hardware-based PWM channels. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware timers, using interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's necessary if you need to measure some data requiring better accuracy. PWM feature can now be used. Max PWM frequency is limited at 1000Hz

  stm32isrpwmpwm-driverduty-cycletimer-interrupthardware-timerisr-basedisr-based-pmwmulti-channel-pwmsynchronized-pwmisr-based-pwmstm32f7stm32h7stm32l5stm32gstm32wbstm32mp1nucleo-144stm32f
  Language:C 2

• LigasN / Archived_CameraOV2640

  ArduCAM library conversion to handle DCMI interface

  cameradisplayili9486nucleonucleo-144ov2640stm32stm32f7stm32f767zibmpcimagerawstm32cube
  Language:C 0
• ARM-alapok

  gabboraron / ARM-alapok

  ARM architektúra alapjai

  arm32stm32f756zgnucleo-144