pwm-fan
There are 0 repository under pwm-fan topic.
srg74 / WLED-ESP32-dev-board
EPS32 dev board for WLED project and many more
alexfukahori / rpi-pwm-fan-control
This Python script was created for the purpose to control a PWM FAN Noctua NF-A4x20 5V, using Raspberry Pi 4B hardware features. The script use WiringPi-Python as a dependecy, it is used to set Hardware PWM value clock as 25Khz that was specified by Intel (c.f. “4-Wire Pulse Width Modulation (PWM) Controlled Fans”, Intel Corporation September 2005, revision 1.3), to read the FAN speed using the tachometer, it is read by using Hardware provided interruption pin. Using Hardware feature use less CPU to execute the work, avoiding to use Raspberry Pi CPU resource only to control the FAN speed.
Language:Python 26adolfintel / NanoFanController
Arduino Nano based PC PWM fan controller. Up to 3 fans.
Language:C++ 18swvincent / arduino-fan-controller
4-Wire PWM fan control using Arduino ATmega328P and ATtiny85
Language:C++ 17- cm4-pwm-fan
dans98 / cm4-pwm-fan
A simple Python script than when run on a Raspberry Pi Compute module 4 will use a fan curve to control a pwm fan.
Language:Python 11 ziggymax / pi-fan
A small server that can control a fan on a Raspberry Pi 4 based on CPU temperature.
Language:C 11mthorley / arduino-racktempcontroller
Arduino Rack Temperature Controller
Language:C 7- Language:HTML 6
Serjdud / orangepizero2_pwm_fan_control
How to control a PWM fan depending on CPU temperature on a Orange Pi Zero2
Language:Python 6Tanuj2552 / Temperature-Controlled-Fan
This contains details about a mini-project temperature-controlled fan, using 8051 Micro Controller along with some additional electronic components like LM35 (temperature sensor), ADC0804, Motor Driver, and a DC Motor to replicate a fan. The simulations have been done in Proteus Simulation Software. The project report contains a detailed description of the working of the project.
tjko / fan-test-adapter
Adapter PCB board for easily testing PC (PWM) fans.
straker741 / HeizBooster
PlatformIO project. Regulation of 12V DC fans based on DS18B20 temperature sensors. Designated for effective heat dissipation of typical heater.
Language:C++ 5- Language:Python 4
3KUdelta / Orange-Pi-H2-H3-Hardware-PWM-Fan
How to control a PWM fan depending on CPU temperature on a Orange Pi Zero (H2+ / H3)
Language:Python 3jamsinclair / opifancontrol
A simple PWM fan controller for Orange Pi boards
Language:Shell 3Matesxs / ESP32FanController
ESP32 10 Channel PWM Fan Controller
Language:C++ 3- Language:Python 3
canbax / bilkent-cs431
lab and project codes for embedded systems course CS 431 at bilkent university
Language:C 2cryham / fan-ctrl
Fan controller for Teensy 3.2 with TFT ST7735 color display. PWM or Analog, RPM, Temperature etc.
Language:C 2erikdelange / WiPy-2.0-Temperature-Controlled-Fan
PWM fans with temperature based speed control which can be placed on a central heating convector, with a JavaScript based web interface.
Language:Python 2Stridsvagn69420 / pi-fanctl
Raspberry Pi daemon for PWM fan speed control
Language:C 2adrian-soch / fan_speed_controller
Using a STM32L476 MCU to control fan speed based on Temperature readings.
Language:C 1Helius / pwm_fan_control
arduino pro mini board for control pwm fan with ds18b20
Language:CMake 1iPAS / pic16f1823_pwm-fan-control
PIC16F1823 PWM fan-controller project that uses DS1207 temperature sensor. Itself behaves as I2C slave, to be commanded by any other MCU.
Language:C 1jaksg82 / FanControl_IOT
Application to control the temperature inside a closed 3d printer box
Language:C++ 1mkjanke / ESP32-C3-Fanspeed
Read two temperature sensors (DHT11 or DS18B20), set PWM fan speed based on temperature differential.
Language:C++ 1Arshadulla1 / Arduino-Based-Temperature-Controlled-Fan
A temperature-controlled fan using Arduino. With this circuit, we will be able to adjust the fan speed in our home or office according to the room temperature and also show the temperature and fan speed changes on an LCD display.
Language:C++ 0bjorngluck / rPi-fan
Collection of scripts to control fan speed of a Ubuntu Raspberry Pi 4
Language:Python 0gajdipajti / fan-control
A project for controlling 2, 3, and 4 wire DC fans using Arduino or a Raspberry Pi. It also integrates into munin monitoring. Funded by the Free Software Foundation Hungary. The code is under GPLv3. Schematics, drawings, and the documentation is under CC BY-SA-4.0. If you have an idea about how to improve the project, jus file an issue.
Language:C++ 0Link-AM / omv-x735-fan
Raspberry Pi Fan Controller: A Python script and accompanying service to control the speed of a fan connected to a Raspberry Pi based on the core temperature. Designed for use with the x735 board and OpenMediaVault, but adaptable for other setups.
Language:Python 0Read two temperature sensors (DHT11 or DS18B20), set PWM fan speed based on temperature differential.
Language:C++ 0- Language:Python 0
projectflx / pwmfanservice
PWMFanService is a systemd-service controlling your pwm fan based on the CPU temperature.
Language:C# 0ve6sar / SolarHeaterController
An Arduino sketch to control the fan speed using PWM in a solar heater
Language:C++ 0lanefu / fan-control-rock5b-poe
PWM fan speed control for Radxa Rock5b 25W POE hat
Language:C- Language:Shell
