There are 1 repository under heating-control topic.
Smart Thermostat with PID controller for HomeAssistant
Monitor and control Daikin/Rotex (hybrid/Altherma) heat pumps via the 2-wire P1/P2 thermostat interface with an ATmega328P, ESP8266, and electronics. The P1P2Serial library and P1P2Monitor program perform low-level bus operation, the P1P2-bridge-esp8266 program interprets data from/to MQTT supporting Home Assistant MQTT discovery. P1P2Serial may also be used for other Japanese Home Bus System based standards: DIII-NET (F1/F2) bus, Mitsubishi M-Net bus, Toshiba TCC-Link, Hitachi H-link, Panasonic/Sanyo SIII-Net, Haier, York, and others.
Esp8266 mqtt interface for Wavin AHC-9000/Jablotron AC-116
heating control incl. simple actor handling
Uponor Smatrix Pulse heating/cooling system integration for Home Assistant.
:fire: Open source closed-loop dew buster PID controller
Connect WOLF heating, solar and domestic ventilation
TuYa TS0601: Home Assistant automation for more accurate temperature control leveraging an external temperature sensor
Make your Junkers heating even smarter!
A diy proportional heating valve, trv valve
PyPlumIO is a native ecoNET library for Plum ecoMAX controllers.
ebusd plugin for Domoticz
ESP-8266 Smart home dev board / general purpose IO for your home!
Ein ESP32 Arduino Sketch für die Steuerung einer Junkers Gastherme an einer 1-2-4 Schnittstelle
A simple web based schedule editor for the evohome heating control system
WOLF Smartset MQTT Bridge
ESP8266 Smart Home Playground
Heating scheduler for Athom Homey
Universal remote climate monitoring and management system for greenhouses and indoor grow operations
PlatformIO project. Regulation of 12V DC fans based on DS18B20 temperature sensors. Designated for effective heat dissipation of typical heater.
Es handelt sich um ein Modul für FHEM, um Klimageräte von Daikin über die Daikin-Cloud zu steuern.
Adapter for ioBroker to connect to local Controme mini server
Homebridge plugin for Drayton Wiser heating systems
Python based interfacing to a iDM iPump heating system (via modbus TCP)
WundaSmart Integration for Home Assistant
System for underfloor heating