There are 1 repository under multisim topic.
Лабораторные работы по курсу "Архитектура ЭВМ"
Electronics Workbench (MultiSIM/Ultiboard) proprietary file format decoder
Other Small Semester 2 Projects
Contains basic Simulation circuit layout for concepts involved in Electronic Devices and Circuits and Integrated Circuits Subjects
This includes a project on designing Current Transformer with 200 number of Turns.
These are some Multisim 14.1 simulated working circuits of BJT and Diodes
20Hz-1MHZ 5 stage 500 gain Amplifier Analog Circuit Design.
Project for "Industrial Project". Basic idea is to make a portable power bank
Various experimental and research projects made by students
Taller de Diseño Analógico. Proyecto 2 basado en módulos para crear un multímetro capaz de medir corriente alterna, directa, inductancia y resistencia. Además se integra módulo PWM.
A simple electronic digital clock that shows the time in the format HH:MM:SS.
This project involves the design of an 8-bit computer on a low-level using discrete logic gates.
Semester 3 lab project.Our goal was to design and build a Function Generator using analog electronic components. We could archive great test results of wave forms with noise-free.
Currently working on ECG
Electronic Proyects, Hardware and Software
Skilling projects using Matlab, Ni LABVIEW, Multisim
A diode bridge rectifier based 5V DC regulated power supply using LEDs simulated using MULTISIM 12.0
A single phase full wave diode bridge rectifier circuit using MULTISIM 12.0
Robert Bara's Electrical Engineering College portfolio
Manipulates all the input values in a multisim circuit and takes their screenshot.
This repository consists of all the laboratory work which has been done in the time period of all semester in Electronics and Communication(ECE) stream of Bachelors in Technology (B.Tech)
Electronics 1 & 2 + Electronics Laboratory 1 + Electrical Machines 1 + Analysis of Electrical Energy Systems 1 courses projects
To determine the physical parameters of a DC motor in order to correctly obtain the model and stablish an adequate control for a self-made reaction wheel.
Final design project for an Engineering Physics course at McMaster University. A finite-state machine that was designed using the ICs available to us and NI Multisim to produce a device that cycled through a student number on a 7-segment display demonstrating knowledge of sequential logic.
Final design project for an Engineering Physics course at McMaster University. An ultrasonic range finder designed using several ICs and a pair of piezoelectric transducers that displays the recorded distance to an object in centimeters on 2 7-segment display modules.
All reports of Electrical Engineering MultiSim 14
I was part of the team of four that designed and produced a function generator using only analog components. This project enhanced my practical skills in analog circuit design, including understanding waveform generation, signal integrity, and the intricacies of component interaction.