arduino-ota
There are 0 repository under arduino-ota topic.
vortigont / esp32-flashz
zlib compressed OTA firmware update for ESP32. Implements on-the-fly OTA images decompression on upload/flashing
Language:C++ 29AdrianoGarafulic / Rain-Gauge-Esp8266-NTP-RTC
Using Croduino Nova2 ESP8266, Blynk, Arduino OTA, NTP servers, RTC internal clock and precipitation sensor, a precipitation meter was made. Since the rainfall measurement is reset every day at midnight, the microcontroller needs to know what time it is. Each time the microcontroller is started and connected to the Internet, it pulls the time from the NTP server and starts the internal RTC clock with the obtained time value. Because if the time was constantly withdrawn from the NTP server in case of being left without an Internet network, the rainfall value would not be reseted at midnight, so it only withdraws time from the NTP server once and later relies on the internal RTC.
Language:C++ 5The user has an insight into current and historical measurements of temperatures in the greenhouse via the blynk application interface. It also has the ability to manage notifications by which it is notified when the temperature value from a particular sensor exceeds the set value and thus prevents any damage that would occur if the user was not notified of the event. (Events to be notified: temperature high, temperature too high, temperature low, temperature too low).
Language:C++ 0"Smart radiator" is made from an old oil radiator that has a thermostat located on the radiator itself. Also an air quality detector wich is notifying on costumers mobile device when the air quality is low in order to open the window.
Language:C++ 0Pie1722 / IOT_RC_CAR
A rc car controlled from mobile via through Esp 12-E or NodeMCU 1.0
Language:C++ 0thetechguy2016 / AglowOta
We provides over-the-air(OTA) service for your complete product line at a single place
Language:C++ 0- Language:C++ 0
joyel24 / SimpleESP01httpRelayArduinoOTA
A simple Arduino project to work with Single & Dual Relay modules with ESP01 ESP8266 With Simple http page & ArduinoOTA support to upload code from Arduino IDE wirelessly - No need to remove from relay module to program it
Language:Czebrajaeger / Esp32Clock
WiFI Clock, synchronized with NTP, WiFi and timezone settings via web interface. Auto access point mode. Arduino-OTA updateable.
Language:C++
