There are 0 repository under deepsleep topic.
Using the Firebeetle ESP32-E as battery powered sensor (SKU:DFR0654-F)
All about the MicroWakeupper Library (and BatteryShield for the Wemos D1 Mini)
ESP8266 PIR monitor with deep sleep and RTC memory store
Battery-friendly Pocket Mode At Kernel Level
ISR-based projects demonstrate how to use ESP8266TimerInterrupt, ESP32TimerInterrupt and TimerInterrupt Library
Make a manual switch to control the Sonoff Basic R2!
blinking ESP32 led while core and ULP are asleep most of the time
Wemos D1 mini based temperatures\humidity battery powered sensor
A low-power sensor unit, designed to monitor the temperature inside of tree holes over a long period of time
This is a project to transmit data by MQTT with low power by connecting the fine dust sensor and 18650 battery to the wemos d1 mini board!
:bridge_at_night: Better sleeping times powered by React.
Alternativer Displaytreiber für waveshare-Boards mit dem ESP32
Distributed MQTT multi-slot parking system with ESP8266 and ESP32
ESP8266+Wemos D1 mini+LoRa(SX1276)+DeepSleep
wemos d1 mini+esp8266+ESPNOW+DeepSleep+IoT
blynk iot+wemos d1 mini+deepsleep
Demonstration of the fastest wireless re-connection possible after ESP.deepSleep
ESP32/8266 Arduino/PlatformIO library that painlessly enables incredibly fast re-connect to the previous wireless network after deep sleep.
Alternativer Displaytreiber für waveshare-Boards mit dem ESP8266
basic of getting data from https://aqicn.org/api/ send via line, the make a long sleep
Multi Analog Sensors using the Multiplexation on Analog Input on the ESP8266.
Sends an Signal to your MQTT-Broker if a letter has arrived.
measurement of water volume in a cistern with ultrasonic sensor and wemos d1 mini every 12h - deep-sleep in between - off-grid with 2 LiFePO4 cells - display of results on website with chartjs
DeepSleep is an open source RESTful Api framework providing full support for RESTful interfaces written in C#. The base DeepSleep framework, where the majority of functionality lives is built on netstandard 2.0 for interoperability.
Eclipse zenoh for pico devices - support for deep sleeping on ESP32.
An example demonstrating the usage of the LowPower library on BastWAN
Micropython code for ESP-01s DHT11; to setup a temperature/humidity sensor and publish via mqtt; with deepsleep