There are 0 repository under piezoelectric-sensors topic.
This repository contains a novel time-series dataset for impact detection and localization on a plastic thin-plate, towards Structural Health Monitoring applications, using ceramic piezoelectric transducers (PZTs) connected to an Internet of Things (IoT) device.
An example of active vibration attenuation by linear quadratic control entirely implemented in ANSYS APDL.
ANSYS(TM) FEM: multiphysics simulation of MEMS-sensors based on silicon with pizoelectric thin-film layers and etched quartz crystals
This repository contains the 3D models developed for better visualization of generating energy by applying pressure on a piezoelectric shoe or "SmartFeet", which in turn is made up of 25 (or 26) piezoelectric sensors embedded in each shoe, a 47 μF/ 4.50V capacitor, a full wave bridge rectifier (four 1N914 diodes), a diode (also of model 1N914), a LED (model NSPW500BS), a resistive load (1 kΩ) connected using wires. Since a piezoelectric sensor can't be used in the LTSpice directive, we have used a SINE(0 5) voltage source to replicate the same at increments of 2V, alongside a slideswitch.
BIMORPH : MEMS microactuator based on silicon diaphragm with piezoceramic, Material properties via BIMORPH.MAT, piezo-electric BIMORPH microactuator
Trains you not to type harshly to prevent OOS
Trains you not to type harshly to prevent OOS
Worked in an engineering startup in Singapore as an Electronics Design Engineer. Used PCB Design (EAGLE CAD), MATLAB Programming, Arduino & Circuit Simulation (LTSpice) for sensors development.
Implemented a smart bed prototype with an alarm system integrated with room lights and sleep pattern detection for monitoring quality of sleep.
BMFT-Verbundprojekt: Einsatz der Mikromechanik zur Herstellung Frequenzanaloger Sensoren, HSG-IMIT, Villingen-Schwenningen
Papers & Publications
Dissertation in Physik, Univ. of Bonn
The desktop application that handle visualizing and data collecting for wrist's pulse that runs in the Raspberry Pi