There are 0 repository under electonics topic.
Sphere² Lamp – A lamp of 122 domes on a sphere, illuminated by individually controlled RGB LEDs. Using animated color effects, the lamp creates a unique atmosphere.
OpenLaserSafety is a controller pcb and software that intends to check safety measures for a laser cutter.
Project: Crash Detection System using arduino uno
The robot has been developed and programmed by IC 4093 control. Designed to move independently and avoid obstacles by either moving left, right or backward. Then the robot will move forward by using infrared sensors to adjust their moving. Obstacles avoid-er programmer use Otto 4 legs which rely upon two infrared emitters & a receiver to sense obstacles in its environment then the programmed will order to avoid the obstacle by either stop, moving backward, or change direction to move forward. First and foremost the two sensors are connected at the front of the robot to sense the obstacle. The sensor consists of an IR led and IR sensor pair, the light transmitted from the led is reflected from the obstacle which comes in front of the robot.
A small breakout board for various video connectors
The open source Watering Machine device build for fun using an "old school" TTL logic with low/middle integration. Sources contains the logic design, schematics design and the PCB design
NanoTekSpice is a project developed as part of the Object-Oriented Programming module at Epitech
various potentiometer connections comparison
The PZEM004TV1 Arduino library simplifies interfacing with the PZEM-004T V1.0 power monitoring module. It offers an intuitive way to access key electrical parameters, including voltage, current, power, energy, frequency, and power factor, enhancing the efficiency of power monitoring in Arduino projects.
Sweep through ranges of command line hyperparameters to create testcases for multiple corners
Electronics shop Website