There are 0 repository under lna topic.
LNA with filter for 400-440 MHz (UHF for amateur satellites)
This project shows the design process of the main blocks of a typical RX frontend system.
This project is about building a high FOM 2.4 GHz LNA for Bluetooth Low-Energy (BLE) Standards, using 45nm CMOS technology.
CC1190 CC1312R1 Sub-G Ping pong example
SDRFunk - Radio Receiver Chrome Extension
Singled ended to differential (BALUN) amplifier for direct sampling with RTL-SDR dongle
Expansion board for Raspberry Pi 4 Model B that eliminates the need for a direct wired connection of radio equipment to GPIO when working with rpitx or rpitx-ui packages. Now, you can use coaxial SMA output, switchable filters, and built-in LNA on one board!
This is a 2.4 GHz LNA project being done for practice using Keysight ADS. This project attempts to automate the design process using python to make it easier.
Osmocom BTS amplifier (LNA + PA); mirror of https://gitea.osmocom.org/cellular-infrastructure/osmo-bts-amp
This work shows the design of dual band low noise amplifier at 1.1GHz and 2.4GHz using ADS software
This is a repository for Proof of Concept of Design and Implementation of a C band Low Noise Amplifier for Geo-Sat Communication
LNA bias values currently need to be entered manually into the SPF SHIELD GUI. These values need to be looked up in as-built documentation, which is an extra step allowing human error. This code extracts the relevant data in a format that SHIELD can autopopulate the LNA bias fields.
Design of a 2.45GHz RFIC CMOS LNA
Design and simulation of a spiral inductor, as part of the Telecomunications Electronics class.
SK66112 NRF52 PA/LNA BLE Ping pong example
Very low noise <0.8dB band pass amplifier to multi frequency bands.