bigtreetech
There are 2 repositories under bigtreetech topic.
- SMuFF-1.1
technik-gegg / SMuFF-1.1
Latest version of the SMuFF firmware to be compiled in PlatformIO
Language:C++ 175 - BTT_SKR_13_14_14T_SD-DFU-Bootloader
GadgetAngel / BTT_SKR_13_14_14T_SD-DFU-Bootloader
This is a repository of BIGTREETECH bootloaders. The originals are stored under the bootloader_bin/backed_up_original_bootloaders/ directory. This repository also has a bootloader for the SKR E3 TURBO to fix the high pitch sound coming out of the CR10_STOCKDISPLAY it is located on the bootloder_bin/compiled_bootloader_bin/ directory.
Language:C 110 - SKR-V1.4-Turbo-Stepper-Driver-Jumper-Configuration-Manual
SKR V1.4 TURBO Stepper Driver Jumper Configuration Manual
- GTR-V1.0-Stepper-Driver-Jumper-Configuration-Manual
GTR V1.0 Stepper Driver Jumper Configuration Manual
- Language:C 18
freakydude / klipper-serial-btt
This is my project to enable serial (UART) connected BigTreeTech-TouchScreens with Klipper by emulating anything it needs with macros.
Language:Shell 17- SKR-PRO-V1.1-Stepper-Driver-Jumper-Configuration-Manual
SKR PRO V1.1 Stepper Driver Jumper Configuration Manual
- SKR-PRO-V1.2-Stepper-Driver-Jumper-Configuration-Manual
SKR PRO V1.2 Stepper Driver Jumper Configuration Manual
- droxeybot
droxey / droxeybot
Ender 3 build featuring SKR Mini E3 V2.0 / Hemera / Filament Detection / BLTouch / UPS / Power Relay
Language:C++ 10 - SKR-V1.3-Stepper-Driver-Jumper-Configuration-Manual
SKR V1.3 Stepper Driver Jumper Configuration Manual
- Wanhao-Duplicator-i3---BIGTREETECH-SKR2-with-TMC2209
TheAlexClavijo / Wanhao-Duplicator-i3---BIGTREETECH-SKR2-with-TMC2209
Firmware for Wanhao Duplicator i3 with BIGTREETECH SKR 2 board & TMC2209 Drivers
Language:C++ 9 Dids / klipper-priority-fix
A simple but hacky workaround for raising Klipper service priorities on lower end SBCs like BTT-CB1, to avoid timeouts and failed prints.
Language:Shell 8- SKR-V1.4-Stepper-Driver-Jumper-Configuration-Manual
SKR V1.4 Stepper Driver Jumper Configuration Manual
iworld4us / RepRapFirmware-OCTOPUS-V1.1
OO C++ RepRap Firmware — Modification for BIGTREETECH-OCTOPUS-V1.1 on STM32F446ZET6 (512 KB)
Language:C 5Ozies / 3D_Printing
3D Printer Klipper, Moonraker, KlipperScreen & Fluidd configs
bagobor / aklp_skr13_marlin20
Marlin's 2.0.x fork for Anycubic Kossel Linear Plus + SKR 1.3
Language:C++ 3krautech / btt-eddy-guide
A how-to guide on how to install BigTreeTech Eddy Probe
bridget512 / MyEnder3Max
Current configurations for my modified Ender 3 Max (Klipper, Fluidd)
Language:G-code 2Fisheiyy / FriedSalmon2040
A, probably partially-functional, RP2040 based, 3D Printer Motherboard.
Language:HTML 2- GA-Voron-Documentation
Live test site for Voron DOCs site
Language:JavaScript 2 sajrashid / klipper_config
Klipper config
So6Rallye / BTT-E3-RRF-Marlin-2.0.7.2-wifi
forked from bigtreetech/E3 RRF. how to enable wifi ESP07S with marlin 2.0.7.2 on BTT E3 RRF
- Marlin
Anthony-Andrews / Marlin
custom marlin build, i accept no responsability if u use this and ur ender-3 implodes. precompiled bins in platformIO folder
Language:C 1 DarrenLynch / Modified-Ender-3
A repo with my modified ender 3, including firmware and hardware.
Language:C++ 1BIGTREETECH - Pinouts, Diagrams and Notes
- Language:C++ 1
LaurentChevalier / Geeetech-A20M-SKR-V1.3
Marlin firmware 2.0 for SKR V1.3 mounted on Geeetech A20M
Language:C++ 1Microsofix87 / klipper-bigtreetech-skr-mini-e3-v2
klipper-bigtreetech-skr-mini-e3-v2 Ender 3 sensor filamento
NathanBerglas / Marlin-2.1
Marlin 2.1 setup for Ender 3 V2 and SKR Mini E3 V2.0
Language:C++ 1nikolai-matijevic / klipper-pin-aliases
Collection of pin aliases for different boards to be used in printer configurations
- Language:C++ 1
SanderRave / Voron-V0.564
This is the development of Voron V0564 refurbishment
JetDev22 / CustomPrinterX1
First Custom 3D Printer build from Anycubic Mega S parts
Language:C 0matthew-yates / BTTskrE3v3_case
Case for Bigtreetech skr mini E3 V3 board and TFT35 E3 V3 LCD panel
Language:OpenSCADMarlin version 2.1.2.2 for the SKR mini E3 V3.0.1
Language:C++
