creality

There are 4 repositories under creality topic.

• D3vil-Design / K1-Hardware-Mods

  D3vil Design's K1 and K1 Max Hardware Modifications

  3dprintercrealityk1upgradek1max
  227

• ihrapsa / KlipperWrt

  A guide to install Klipper with fluidd, Mainsail or Duet-Web-Control and webcam stream in OpenWrt. Mainly created around the Creality Wi-Fi box but any OpenWrt running device with similar specs will work just fine.

  klipperfluiddmainsailduet-web-controlmoonrakeropenwrtcreality
  Language:Shell 194

• classicrocker883 / MRiscoCProUI

  This is optimized firmware for Voxelab Aquila & Ender3 V2/S1 3D printers.

  3d-printer3d-printing3dprinter3dprintingaquilacrealityender-3v2ender3ender3s1ender3v2voxelabfirmware
  Language:C++ 111

• daveydaid / Custom-3DPrinter-Enclosure

  Hardware design files for creating a custom enclosure for an Ender3 v2 3D printer

  3d-printingadditive-manufacturingcrealitycreality3denclosed-3d-printingender3ender3v2
  82

• ihrapsa / OctoWrt

  A guide to install Octoprint on the Creality WiFi Box or similar OpenWrt devices

  octoprintopenwrtcreality
  Language:Shell 81

• shubham0x13 / ender-3-v3-se-klipper

  Klipper configuration and macros for the Ender 3 V3 SE

  ender3v3seklipper-configurationklippercreality
  37

• husjon / creality-k1

  crealityklipper-configurationcreality-k1creality-k1-klipper
  Language:Shell 35

• Shenkoe / Creality-Ender-3-and-Variants-Accumulative-Guide

  This is a guide that address initial setup and possible issues you may encounter while using this machine. Basically a repository of information from across the web, that has been tested and confirmed as a valid. Also contains information Not specific to the Ener series of machines (ie motor, nozzles, and other tips and tricks

  ender3crealityendertroubleshooting
  33

• BangerTech / BambuCAM

  🎥 A modern web application for monitoring multiple 3D Printer (BambuLab X1C, Creality / Fluidd / Moonraker, OctoPrint) through their camera feeds

  3d-printingbambulabcrealityfluiddgo2rtcoctoprint
  Language:Python 28

• FUEL4EP / Creality_Ender_3_S1_Pro

  Some recipies for setting up a Creality Ender 3 S1 Pro 3D printer with Cura 4.13.0

  ablauto-bed-levelingcrealitycuraendersetupender-3-s1-prosettings
  Language:G-code 22

• nicioniz / HowToInstallOctoprint

  A step by step guide to install OctoPrint on the OrangePi PC (and on any arm single board computer)

  octoprint3dprinting3d-printingorangepiorangepi-pcorangepi-pc-boardraspberry-piraspberrypilinuxpythonpython3armbiancrealitycreality3dender3ender3proocto-printbashguide
  20

• classicrocker883 / Marlin-Alex

  Firmware mainly for Voxelab Aquila or Creality Ender w/ 4.2.7 board or G32/N32 chips

  3d-printing3dprinterprinterscreality-boardscrealityender3enderaquilavoxelab
  Language:C++ 18

• gentlegiantJGC / GCode-Sequencer

  A python script to load and automatically fit pre-sliced gcode onto the build plate of an FDM 3D printer

  gcodeslicersequencermergefitsequence3dprintprinterfdmplaabscuracrealityenderender3prusa-i3prusai3
  Language:Python 18

• chiragkrishna / Klipper

  ender 3 and ender 5 Configs

  ender3ender5ender3dprintprintingcreality
  11

• CarloCamacho / klipper_config

  Klipper config backup - CR-10v3 w/ SKR Mini E3

  raspberry-piklipper-configurationcreality
  9

• pwlgrzs / ender3-v3-se-gitbook

  Your one-stop-shop for everything related to Ender 3 V3 SE, but better!

  3dprintingawesomecrealityenderguidesklippermarlin
  9

• thijse / Marlin-Creality-CR10

  Configuration of Marlin 1.1.x for Creality CR10 with mesh bed leveling & BLtouch

  marlincreality3dcrealitycr-10scr-10bltouchunified-bed-levelingublcr-10sv1petzfang-bullseyepetzfang
  Language:C 9

• 3DP-Tech / Ender-3-Max

  Marlin configuration for Ender 3 Max with CR Touch/BL Touch.

  ender3maxbltouchcrtouchcrealitycreality3dcreality-boardsmarlinmarlin-firmwarev422
  Language:C 8

• janchristophmartin / marlin-jyers-ender3max

  This project allows to use the JyersUI branch of Marlin on a modified Ender-3 Max printer

  firmwareender-3jyersmarlinender-3maxender-3v2ender3maxender3v2creality
  Language:C 8

• kornflex / klipper-cr10-bltouch-filament-sensor

  Klipper Configuration files for a Creality Cr10 v1 with Bltouch and filament sensor

  klipper3d-printercrealityfluiddpi
  7

• thisiskeithb / EnderAIO

  All-in-One Marlin firmware for your 32-bit Creality Ender-3!

  3d-printingcrealityenderfirmwarenxpnxp-lpcreprapstm32stmicro
  Language:C++ 7

• Dids / btt-pinouts-diagrams

  BIGTREETECH - Pinouts, Diagrams and Notes

  bigtreetechbiqubttcb1crealitycreality3denderender-7spitft35tft35v2tft35v3uart
  6

• qocaier / Timer

  Таймер отложенной 3д печати

  crealitycreality-k1creality-k1-klippercreality3dgcodeklipperklipper3dtimerklipper-macrosmacrosg-codejinja2
  Language:G-code 6

• vvaske / Extruder-E-steps-FlowRate-Calculator

  Extruder E-steps & FlowRate Calculator by VASKE is easy tool to correct the STEPS/MM of your 3D Printer especially in case if you doing upgrade from Bowden tube to Direct Drive and fix FlowRate

  3d-printing3d-models3d-printerfilamentfilament-detectionprusaprusaslicercrealitycreality3dextruder
  Language:C# 6

• e-dreyer / Creality-CR6SE-Klipper-config

  Personal implementation and config for my Creality CR6-SE Klipper, Moonraker and Mainsail setup

  3dprintingcr6-secrealityklippermainsailmoonraker
  5

• fdm-monster / MonsterPi

  Raspberry Pi image for FDM Monster based on Ubuntu 20.04 LTS, MongoDB 4.4 and FDM Monster 1.x

  3d-printing3dprintingcrealitycustompiosenderfdmmk3sprusaprusa-miniraspberry-piraspberry-pi-3raspberry-pi-4ubuntuubuntu2004fdm-monster
  Language:Shell 5

• jasonacox / Ender3-Filament-Digital-Scale

  Adds a load cell to the filament spool holder of a Creality Ender 3 Pro 3D-printer to measure weight and display on TM1637 LED display. Uses ATtiny85 microcontroller and HX711 module for weight measurement.

  crealityender3profilamentloadcellweight-measurementtm1637displayhx711attiny85
  Language:C++ 5

• millerlarson / printer-cr10-cretin

  Klipper config for my CR-10 v3 running Klipper on a SKR 1.4 Turbo

  klipperklipper-configurationcrealityskrcr-10btt3d-printing
  5

• nadiamoe / Marlin-E5P

  Marlin 2.0.x preconfigured and tuned for Ender 5 Pro (Creality 1.1.5)

  marlincrealityenderender5ender-5-pro
  Language:C++ 5
• photoNet

  SG-O / photoNet

  Android app for controlling MSLA printers

  3d-printingandroidanycubicchitumslaelegoocreality
  Language:Java 5

• dbryant3476 / creality_theme

  Creality Theme for Mainsail

  mainsail-themesthemescreality
  Language:CSS 4

• lokiagent / K1-Backup

  Configuration monitoring and automatic backup of Creality K1 configuration files.

  crealitycreality-k1creality-k1-klipperklipper-configuration
  Language:Shell 4

• DarkmageDesigns / Ender5Plus

  Macros I use with Klipper on my Ender 5 Plus

  crealitycreality3dender5plusmicroswissng
  3

• filipton / dgus-moonraker-screen

  cr-10screalitydgusklippermoonrakercp-01ender-5-plusdwin-display
  Language:Rust 3

• pcartwright81 / creality_box_control

  Home Assistant Integration for the Creality Wifi Box

  crealityhactoberfest2024homeassistant-integration
  Language:Python 3

• Xorlent / Ender-5-Max

  Creality Ender 5 Max resources and information

  3d-printingcrealityender-5-max
  3