ser94mor / path-planning

Highway Path Planner for Autonomous Vehicle

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Path Planning (Self-Driving Car Engineer Nanodegree)

In this project, the highway path planner is designed that is responsible for generating smooth jerk-minimizing trajectories that guide the car with the average velocity higher than that of the surrounding cars. The car behaves very much like a real driver who is in a hurry but does not want to violate the speed limit and safety rules. The path planner is capable of planing lane changes to place a car in the best lane concerning the long-term progress, that is, the more distance traveled within a matter of several tens of seconds, the better. The best lane to be in is determined by several heuristics.

This project involves the Udacity Self-Driving Car Engineer Nanodegree Term 3 Simulator which can be downloaded from here.

Dependencies

Build

The path planner program can be built by doing the following from the project top directory.

$> mkdir build
$> cd build
$> cmake ..
$> make

Run

The path planner program can be run by doing the following from the project top directory.

$> build/path_planning data/path_planner_config.json data/highway_map.csv 

Demo

Photo

ANIMATION

Video

LINK TO YOUTUBE

Goals

The goal of this project is to safely navigate around a virtual highway with other traffic that is driving about the 50 MPH speed limit. The car's localization and sensor fusion data is provided by the simulator. There is also a sparse map list of waypoints around the highway (see in data/highway_map.csv. The car should try to go as close as possible to the 50 MPH speed limit, which means passing slower traffic when possible. The other cars will try to change lanes too. The car should avoid hitting other cars at all cost as well as driving inside of the marked road lanes at all times, unless going from one lane to another. The car should be able to make one complete loop around the 6945.554 m highway. Since the car is trying to go 50 MPH, it should take a little over 5 minutes to complete 1 loop. Also the car should not experience total acceleration over 10 m/s^2 and jerk that is greater than 10 m/s^3.

The map of the highway is in data/highway_map.txt

Each waypoint in the list contains [x,y,s,dx,dy] values. x and y are the waypoint's map coordinate position, the s value is the distance along the road to get to that waypoint in meters, the dx and dy values define the unit normal vector pointing outward of the highway loop.

The highway's waypoints loop around so the frenet s value, distance along the road, goes from 0 to 6945.554.

Main car's localization Data (No Noise)

["x"] The car's x position in map coordinates

["y"] The car's y position in map coordinates

["s"] The car's s position in frenet coordinates

["d"] The car's d position in frenet coordinates

["yaw"] The car's yaw angle in the map

["speed"] The car's speed in MPH

Previous path data given to the Planner

["previous_path_x"] The previous list of x points previously given to the simulator

["previous_path_y"] The previous list of y points previously given to the simulator

Previous path's end s and d values

["end_path_s"] The previous list's last point's frenet s value

["end_path_d"] The previous list's last point's frenet d value

Sensor Fusion Data, a list of all other car's attributes on the same side of the road. (No Noise)

["sensor_fusion"] A 2d vector of cars and then that car's [ car's unique ID, car's x position in map coordinates, car's y position in map coordinates, car's x velocity in m/s, car's y velocity in m/s, car's s position in frenet coordinates, car's d position in frenet coordinates ].

Details

  1. The car uses a perfect controller and visits every (x,y) point it receives in the list every 0.02 seconds. The units for the (x,y) points are in meters, and the spacing of the points determines the speed of the car. The vector going from a point to the next point in the list dictates the angle of the car. Acceleration both in the tangential and normal directions is measured along with the jerk, the rate of change of total acceleration. The (x,y) point paths that the planner receives should not have a total acceleration that goes over 10 m/s^2. Also, the jerk should not go over 10 m/s^3.

  2. There is some latency between the simulator running and the path planner returning a path, with optimized code usually it is not very long maybe just 1-3 time steps. During this delay, the simulator continues using points that it was last given.

Code Overview

The architecture can be schematically represented as follows.

        |--------------------------------------|  
        |              Behavior Layer          |  
        |--------------------------------------|  
                ^                     |
                |                     v
      |--------------------|   |-------------------|
      | Prediction Layer   |-> | Trajectory Layer  |  
      |--------------------|   |-------------------|
                ^                     |
                |                     |
      |--------------------|          |
      | Localization Layer |          | [ car{s_1,d_1,vs_1,vd_1,as_1,ad_1,t_1}, 
      |--------------------|          |                  ...
               ^                      |   car{s_n,d_n,vs_n,vd_n,as_n,ad_n,t_n} ]
 sensor fusion |                      v
           |------------------------------|
           |         Path Planner         |
           |------------------------------|
                  ^              | X/Y trajectories
    sensor fusion |              v
               |----------------------|
               |      Simulator       |
               |----------------------|    

There is a class Car defined in src/car.hpp and src/car.cpp which is used in almost every other program file. Car objects contain information about the Frenet coordinates S and D, Frenet velocities Vs and Vd, Frenet accelerations As and Ad, time, car ID, and other.

The file src/main.cpp contains the code to communicate with the simulator and also code that reads configuration files, such as highway map and configuration file containing various settings for the path planner. One can think of this as a Simulator, although, this is an intermediate layer between the path planner and the Simulator, but this exact notion only complicates understanding and brings zero value.

The Path Planner is defined in src/path_planner.hpp and src/path_planner.cpp. It is responsible for accepting the sensor fusion information and forwarding it to the Localization Layer. It also retrieves car trajectory information in the form of an array of Car objects for the successive points in time, this is, a planned trajectory, and converts it into X and Y trajectories in the Cartesian frame. Then it gives this X/Y trajectories to the simulator.

The Localization Layer is defined in src/localization_layer.hpp and src/localization_layer.cpp files and is supposed to substitute a real logic that generates sensor fusion information. Since this information is already available from the Simulator, Localization Layer only plays a role of converter from array-based car representation (provided by the Simulator) to the Car-based car representation.

The Prediction Layer is defined in src/prediction_layer.hpp and src/prediction_layer.cpp files and is responsible for predicting the surrounding cars positions at some time in the future. It relies on the assumption that the surrounding cars do not change their lanes and move with constant velocities. Although it is not exactly true, and some cars might change their lanes and slightly variate their velocities, it happens so rarely that it is not needed to utilize a more complicated motion model. There is a collision avoidance mechanism in Trajectory Layer that handles unexpected lane changes and major velocity variations of the surrounding cars.

The Behavior Layer is defined in src/behavior_layer.hpp and src/behavior_layer.cpp files and it responsible for "higher-level thinking" of the car. Taking into consideration the predictions provided by the Prediction Layer, it plans the next position of the car sometime in the future for each possible next car state. It then weights all the planned cars and chooses the one having the lowest cost.

Since the Behavior Layer is the most interesting component of the path planner, it worth diving a bit deeper into its structure. There are three states that a Car object can be in---KeepLane, LaneChangeLeft, and LaneChangeRight. For each possible next state for the Car object, Behavior Layer constructs future Car objects considering the positions and velocities of the surrounding cars. For KeepLane state it plans to position the ego car slightly behind the car ahead. If there is no car ahead, it just sets to car's velocity to a justified maximum velocity and plans car's position accordingly. For LaneChange* state, the Behavior Layer plans to position the ego car slightly behind the other car in an intended lane that currently violates its safety buffer. If no car violates the safety buffer of the ego car, the Behavior Layer sets the car's velocity to a justified maximum and plans accordingly. The described procedure is a bit simplified; the code considers more subtleties.

For choosing the best planned Car object, the Behavior Layer utilize the following cost functions:

  • the farther the distance to the other car ahead in the ego car's lane, the better;
  • the higher the velocity of the other car ahead in the ego car's lane, the better;
  • the larger longitudinal distance between the current ego car and the planned ego car, the better;
  • given the alternatives, the car should not stay in the rightmost lane because simulator might falsely declare the car out of the lane. (It is a workaround needed to cover differences in the Simulator's method of conversion between Cartesian and Frenet coordinates and the method implemented in the path planner.)

The Trajectory Layer is defined in src/trajectory_layer.hpp and src/trajectory_layer.cpp files and is responsible for generating a jerk-minimizing trajectory between the current Car object and the Car object planned by the Behavior Layer and for collision avoidance. The Trajectory Layer maintains its array of trajectory Car objects (points) generated during previous iterations. This array (buffer) is larger than the one maintained by the Path Planner. It allows to keep a planned trajectory for a couple of seconds in the future and avoid execution of all the code involved into the planning of the next Car object each time the information exchange between the Path Planner and the Simulator happens.

The X/Y trajectories in the Path Planner cannot be changed. The length of X/Y trajectory, this is, the duration of time, in the Path Planner is comparable to the smallest human drivers reaction time. The Trajectory Layer keeps much longer trajectory, and, if there is an unexpected obstacle ahead, it forgets all the planned trajectory and asks the Behavior Layer to re-plan the future car position given the new circumstances. The Behavior Layer "thinks" about 0.1 seconds before producing the future Car object but it is several times smaller than the duration of time of a trajectory that is kept in the Path Planner.

Possible Improvements

The path planner works very stable and makes the car behave almost like a real driver. However, there are still possible improvements that can improve the driving even more:

  • Include the PrepareLaneChangeLeft and PrepareLaneChangeRight states to the car to handle situations like the one on the picture below. There is a car ahead that moves with constant velocity. Also, there is a car behind in the neighboring lane that moves with the same velocity. For such a case, the path planned keeps the ego following the car ahead forever, until there is enough room to change lane. While human driver that, in this case, would considerably lower the speed and change two lanes. Luckily, in real life and the Udacity simulator, such situations are very uncommon.
(1)
====================================================================
                                    v                        v
                        | ego car |--->        | car ahead |--->

--------------------------------------------------------------------
                               v
                | car behind |--->

--------------------------------------------------------------------



====================================================================


(2)
====================================================================
                                                                v
                                                  | car ahead |--->

--------------------------------------------------------------------
            v-dv                   v
| ego car |--->     | car behind |---> 

--------------------------------------------------------------------



====================================================================


(3)
====================================================================
                                                             v
                                               | car ahead |--->

--------------------------------------------------------------------
                               v
                | car behind |--->

--------------------------------------------------------------------
                                                         v_max
                                             | ego car |--->

====================================================================
  • The Trajectory Layer should vary the planned Car object's S and D positions and the planning time horizon following Gaussian distribution. Then it should evaluate all the trajectories and choose the one that meets all the constraints, like in M. Werling, J. Ziegler, S. Kammel, and S. Thrun, "Optimal trajectory generation for dynamic street scenarios in a FrenĂ©t Frame," 2010 IEEE International Conference on Robotics and Automation, Anchorage, AK, 2010, pp. 987-993. It may allow increasing the maximum speed allowed by 2-3 miles per hour.

About

Highway Path Planner for Autonomous Vehicle

License:MIT License


Languages

Language:C++ 82.9%Language:Fortran 10.8%Language:C 1.9%Language:CMake 1.7%Language:Jupyter Notebook 1.3%Language:Cuda 1.1%Language:Shell 0.2%Language:Python 0.1%Language:JavaScript 0.1%Language:CSS 0.0%