Giters

khoih-prog / EthernetWebServer_SSL_STM32

EthernetWebServer_STM32 is a library for STM32F/L/H/G/WB/MP1 boards running WebServer using built-in Ethernet LAN8742A, Ethernet LAN8720, W5x00 or ENC28J60 shields. It now supports Ethernet TLS/SSL Client. The library supports HTTP/HTTPS GET and POST requests, provides argument parsing, handles one client at a time. It supports Arduino STM32F/L/H/G/WB/MP1 series with 32+ Kbytes of Flash, using built-in Ethernet (Nucleo-144: F429ZI, F767ZI, Discovery: STM32F746G-DISCOVERY), or ENC28J60, W5x00 Ethernet shields. Ethernet_Generic library is used as default for W5x00. Now W5x00 can use any custom hardware / software SPI

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

ethernetwebserver-librarystm32http-clientstm32f4stm32f7enc28j60lan8742alan8720w5x00nucleo-f767zinucleo-144websocketstcp-serversslssl-webclientssl-certificatesudp-clientethernet-genericcustom-spi

EthernetWebServer_SSL_STM32

arduino-library-badge GitHub release contributions welcome GitHub issues

Donate to my libraries using BuyMeACoffee

Table of Contents

Important Note for STM32F boards using built-in LAN8742A Ethernet

This EthernetWebServer_SSL_STM32 Library, by design, is working synchronously. The Client requests must be handled by continuously checking in loop() using :

void loop()
{
  server.handleClient();
}

The new AsyncWebServer_STM32 Library, in contrast, is designed to work asynchronously. The Client requests are handled on demand, without continuously checking in loop(). The loop() now can be as simple as :

void loop()
{
}

Currently Supported Boards by AsyncWebServer_STM32

  1. Nucleo-144 (F429ZI, F746ZG, F756ZG, F767ZI)
  2. Discovery STM32F746G-DISCOVERY
  3. Any STM32 boards with enough flash/memory and already configured to run LAN8742A Ethernet.

Why do we need the new Async AsyncWebServer_STM32 library

  • Using asynchronous network means that you can handle more than one connection at the same time
  • You are called once the request is ready and parsed
  • When you send the response, you are immediately ready to handle other connections while the server is taking care of sending the response in the background
  • Speed is OMG
  • Easy to use API, HTTP Basic and Digest MD5 Authentication (default), ChunkedResponse
  • Easily extensible to handle any type of content
  • Supports Continue 100
  • Async WebSocket plugin offering different locations without extra servers or ports
  • Async EventSource (Server-Sent Events) plugin to send events to the browser
  • URL Rewrite plugin for conditional and permanent url rewrites
  • ServeStatic plugin that supports cache, Last-Modified, default index and more
  • Simple template processing engine to handle templates

Why do we need this EthernetWebServer_SSL_STM32 library

Features

This EthernetWebServer_SSL_STM32 library is a simple yet complete TLS/SSL WebClient and non-TLS/SSL WebServer library for STM32F/L/H/G/WB/MP1 boards using Ethernet shields. The functions are similar and compatible to those of ESP32 WebServer and ESP8266WebServer libraries to make life much easier to port sketches from ESP8266/ESP32.

This EthernetWebServer_SSL_STM32 library adds TLS 1.2 functionality to EthernetClient, using BearSSL as an underlying TLS engine.

This EthernetWebServer_SSL_STM32 library, from v1.2.0, also provides high-level HTTP and WebSocket Client with the functions are similar and compatible to those of ArduinoHttpClient Library

The EthernetWebServer_SSL_STM32 library supports:

  1. TCP Server and Client
  2. UDP Server and Client
  3. HTTP Server and HTTP/HTTPS Client
  4. HTTPS GET and POST requests, provides argument parsing, handles one client at a time.
  5. High-level HTTP (GET, POST, PUT, PATCH, DELETE) and WebSocket Client. From v1.2.0.

Library is based on and modified from:

  1. Ivan Grokhotkov's ESP8266WebServer
  2. Ivan Grokhotkov's ESP32 WebServer
  3. OPEnSLab-OSU's SSLClient v1.6.9
  4. ArduinoHttpClient Library

The EthernetWebServer class, found in EthernetWebServer.h header, is a simple WebServer class, knowing how to handle HTTP requests such as GET and POST and can only support one one client at a time.

The EthernetSSLClient class, found in SSLClient.h header, is a simple WebClient class, knowing how to handle HTTP/HTTPS requests such as GET and POST and can only support one client at a time.

Check EthernetWebServer Library Issue: Support for STM32F Series for reason to create this separate library from EthernetWebServer_SSL library

Currently supported Boards

  1. STM32 boards with built-in Ethernet LAN8742A such as :
  1. STM32F/L/H/G/WB/MP1 boards (with 32+K Flash) running W5x00 or ENC28J60 shields)
  • Nucleo-144
  • Nucleo-64
  • Discovery
  • Generic STM32F0, STM32F1, STM32F2, STM32F3, STM32F4, STM32F7 (with 64+K Flash): x8 and up
  • STM32L0, STM32L1, STM32L4, STM32L5
  • STM32G0, STM32G4
  • STM32H7
  • STM32WB
  • STM32MP1
  • LoRa boards
  • 3-D printer boards
  • Generic Flight Controllers
  • Midatronics boards
  1. STM32 boards using Ethernet LAN8720 such as :
  • Nucleo-144 (F429ZI, NUCLEO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG)
  • Discovery (DISCO_F746NG)
  • STM32F4 boards (BLACK_F407VE, BLACK_F407VG, BLACK_F407ZE, BLACK_F407ZG, BLACK_F407VE_Mini, DIYMORE_F407VGT, FK407M1)

Currently supported Ethernet shields/modules

  1. W5x00 using Ethernet_Generic library

  2. W5x00 using Ethernet, EthernetLarge, Ethernet2 or Ethernet3 library

  3. ENC28J60 using new EthernetENC or UIPEthernet library

  4. LAN8720 using new STM32Ethernet and LwIP libraries.

Not supported boards

These boards are not supported:

  • Some Nucleo-32 (small Flash/memory)
  • Eval (no Serial, just need to redefine in sketch, library and UIPEthernet)
  • Generic STM32F0 (small Flash/memory)
  • Generic STM32F1 (with 64-K Flash): C6
  • Generic STM32F3 : no HardwareSPI.h
  • Electronics Speed Controllers (small Flash/memory)

Prerequisites

  1. Arduino IDE 1.8.19+ for Arduino. GitHub release
  2. Arduino Core for STM32 v2.3.0+ for STM32 boards. GitHub release
  3. Functional-Vlpp library v1.0.2+ to use server's lambda function. To install. check arduino-library-badge
  4. For built-in LAN8742A or LAN8720 Ethernet:
  1. For W5x00 Ethernet:
  1. For ENC28J60 Ethernet:

Installation

Use Arduino Library Manager

The best way is to use Arduino Library Manager. Search for EthernetWebServer_SSL_STM32, then select / install the latest version. You can also use this link arduino-library-badge for more detailed instructions.

Manual Install

  1. Navigate to EthernetWebServer_SSL_STM32 page.
  2. Download the latest release EthernetWebServer_SSL_STM32-main.zip.
  3. Extract the zip file to EthernetWebServer_SSL_STM32-main directory
  4. Copy whole
  • EthernetWebServer_SSL_STM32-main folder to Arduino libraries' directory such as ~/Arduino/libraries/.

VS Code & PlatformIO:

  1. Install VS Code
  2. Install PlatformIO
  3. Install EthernetWebServer_SSL_STM32 library by using Library Manager. Search for EthernetWebServer_SSL_STM32 in Platform.io Author's Libraries
  4. Use included platformio.ini file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at Project Configuration File

Packages' Patches

1. For STM32 boards to use LAN8720

To use LAN8720 on some STM32 boards

  • Nucleo-144 (F429ZI, NUCLEO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG)
  • Discovery (DISCO_F746NG)
  • STM32F4 boards (BLACK_F407VE, BLACK_F407VG, BLACK_F407ZE, BLACK_F407ZG, BLACK_F407VE_Mini, DIYMORE_F407VGT, FK407M1)

you have to copy the files stm32f4xx_hal_conf_default.h and stm32f7xx_hal_conf_default.h into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.3.0/system) to overwrite the old files.

Supposing the STM32 stm32 core version is 2.3.0. These files must be copied into the directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/2.3.0/system/STM32F4xx/stm32f4xx_hal_conf_default.h for STM32F4.
  • ~/.arduino15/packages/STM32/hardware/stm32/2.3.0/system/STM32F7xx/stm32f7xx_hal_conf_default.h for Nucleo-144 STM32F7.

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz, these files must be copied into the corresponding directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/system/STM32F4xx/stm32f4xx_hal_conf_default.h
  • ~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/system/STM32F7xx/stm32f7xx_hal_conf_default.h

2. For STM32 boards to use Serial1

To use Serial1 on some STM32 boards without Serial1 definition (Nucleo-144 NUCLEO_F767ZI, Nucleo-64 NUCLEO_L053R8, etc.) boards, you have to copy the files STM32 variant.h into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.3.0). You have to modify the files corresponding to your boards, this is just an illustration how to do.

Supposing the STM32 stm32 core version is 2.3.0. These files must be copied into the directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/2.3.0/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h for Nucleo-144 NUCLEO_F767ZI.
  • ~/.arduino15/packages/STM32/hardware/stm32/2.3.0/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h for Nucleo-64 NUCLEO_L053R8.

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz, these files must be copied into the corresponding directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h
  • ~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h

Libraries' Patches

1. For application requiring 2K+ HTML page

If your application requires 2K+ HTML page, the current Ethernet library must be modified if you are using W5200/W5500 Ethernet shields. W5100 is not supported for 2K+ buffer. If you use boards requiring different CS/SS pin for W5x00 Ethernet shield, for example ESP32, ESP8266, nRF52, etc., you also have to modify the following libraries to be able to specify the CS/SS pin correctly.

2. For Ethernet library

To fix Ethernet library, just copy these following files into the Ethernet library directory to overwrite the old files:

3. For EthernetLarge library

To fix EthernetLarge library, just copy these following files into the EthernetLarge library directory to overwrite the old files:

4. For Ethernet2 library

To fix Ethernet2 library, just copy these following files into the Ethernet2 library directory to overwrite the old files:

To add UDP Multicast support, necessary for the UPnP_Generic library:

5. For Ethernet3 library

To fix Ethernet3 library, just copy these following files into the Ethernet3 library directory to overwrite the old files:

6. For UIPEthernet library

To be able to compile and run on nRF52 boards with ENC28J60 using UIPEthernet library, you have to copy these following files into the UIPEthernet utility directory to overwrite the old files:

7. Optional UIPthernet patch

Check if you need to install the UIPthernet patch new STM32 core F3/F4 compatibility to avoid errors #include HardwareSPI.h on some STM32 boards (Nucleo-32 F303K8, etc.)

Configuration Notes

1. How to select which built-in Ethernet or shield to use

Select one and only one Ethernet library to use as follows:

  • Standard W5x00 Ethernet_Generic library

Standard W5x00 is using Ethernet_Generic library by default, in the sketch, just be sure to comment out or leave these #defines to be false :

#define USE_BUILTIN_ETHERNET    false
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  true
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   false
#endif

To use built-in LAN8742A

#define USE_BUILTIN_ETHERNET    true
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  false
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   false
#endif

To use LAN8720

#define USING_LAN8720           true
#define USE_BUILTIN_ETHERNET    true
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  false
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   false
#endif

To use W5x00 Ethernet, for example using Ethernet_Generic library

#define USE_BUILTIN_ETHERNET    false
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  true
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   false
#endif

To use ENC28J60 Ethernet, using EthernetENC library (NEW and Better)

#define USE_BUILTIN_ETHERNET    false
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  false
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      true
  #define USE_CUSTOM_ETHERNET   false
#endif

To use ENC28J60 Ethernet, using UIPEthernet library

#define USE_BUILTIN_ETHERNET    false
#define USE_UIP_ETHERNET        true

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  false
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   false
#endif
  • To use another Ethernet library For example, EthernetLarge library
#define USE_BUILTIN_ETHERNET    false
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  false
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   true
#endif

....

#elif USE_CUSTOM_ETHERNET
  //#include "Ethernet_XYZ.h"
  #include "EthernetLarge.h"
  #warning Using Custom Ethernet library. You must include a library and initialize.
  #define SHIELD_TYPE           "Custom Ethernet & Ethernet_XYZ Library"
#else
  #define USE_ETHERNET_GENERIC   true
  #include "Ethernet_Generic.h"
  #warning Using default Ethernet_Generic lib
  #define SHIELD_TYPE           "W5x00 using default Ethernet_Generic Library"
#endif  
...


#include <EthernetWebServer_SSL_STM32.h>

2. How to select which SPI to use

To use standard SPI, check if

#define USING_CUSTOM_SPI        false
#define USING_SPI2              false

To use SPI2 or any custom SPI

// Be sure to use true only if necessary for your board, or compile error
#define USING_CUSTOM_SPI            true

#if ( USING_CUSTOM_SPI )
  // Currently test OK for F767ZI and L552ZE_Q
  #define USING_SPI2                  true

  #if (USING_SPI2)
    //#include <SPI.h>
    // For L552ZE-Q, F767ZI, but you can change the pins for any other boards
    // SCK: 23,  MOSI: 22, MISO: 25, SS/CS: 24 for SPI1
    #define CUR_PIN_MISO              25
    #define CUR_PIN_MOSI              22
    #define CUR_PIN_SCK               23
    #define CUR_PIN_SS                24

    #define SPI_NEW_INITIALIZED       true

    // Don't create the instance with CUR_PIN_SS, or Ethernet not working
    // To change for other boards' SPI libraries
    SPIClass SPI_New(CUR_PIN_MOSI, CUR_PIN_MISO, CUR_PIN_SCK);
    
    //#warning Using USE_THIS_SS_PIN = CUR_PIN_SS = 24

    #if defined(USE_THIS_SS_PIN)
      #undef USE_THIS_SS_PIN
    #endif   
    #define USE_THIS_SS_PIN       CUR_PIN_SS    //24
    
  #endif
  
#endif

Important:

  • The Ethernet_Shield_W5200, EtherCard, EtherSia libraries are not supported. Don't use unless you know how to modify those libraries.
  • Requests to support for any future custom Ethernet library will be ignored. Use at your own risk.

3. How to connect or select another CS/SS pin to use

The default CS/SS pin is 10 for all boards, and is configurable in code.

If the default pin is not correct, select another CS/SS pin (e.e. D22) to use as follows:

// To override the default CS/SS pin. Don't use unless you know exactly which pin to use
// You can define here or customize for each board at same place with BOARD_TYPE
#define USE_THIS_SS_PIN   22  //21  //5 //4 //2 //15
// Default pin 10 to SS/CS. To change according to your board, if necessary
//#define USE_THIS_SS_PIN       10

The current SPI pin usage can be displayed by turn on the debug option. For example:

Increase debug level to 2 in defines.h of any example:

#define DEBUG_ETHERNET_WEBSERVER_PORT       Serial

// Debug Level from 0 to 4
#define _ETHERNET_WEBSERVER_LOGLEVEL_       2

The Debug Terminal will then show that the current SPI pin usage of NUCLEO_F767ZI ==> SS/CS: D10, MOSI: D11, MISO: D12 and SCK: D13 when using W5x00

Start AdvancedWebServer on NUCLEO_F767ZI, using W5x00 using Ethernet_Generic Library
Ethernet_Generic v2.7.1
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
Connected! IP address: 192.168.2.89

Connect the wires according to the displayed information.

4. How to increase W5x00 TX/RX buffer

  • For Ethernet_Generic library only, simply use as follows to have large buffer similar to EthernetLarge library
#define ETHERNET_LARGE_BUFFERS
  • For Ethernet3 library only, use as follows
  // Use  MAX_SOCK_NUM = 4 for 4K, 2 for 8K, 1 for 16K RX/TX buffer
  #ifndef ETHERNET3_MAX_SOCK_NUM
    #define ETHERNET3_MAX_SOCK_NUM      4
  #endif
  
  Ethernet.setCsPin (USE_THIS_SS_PIN);
  Ethernet.init (ETHERNET3_MAX_SOCK_NUM);

5. How to adjust sendContent_P() and send_P() buffer size

sendContent_P() and send_P() buffer size is set default at 4 Kbytes, and minimum is 512 bytes. If you need to change, just add a definition, e.g.:

#define SENDCONTENT_P_BUFFER_SZ     2048

Note that the buffer size must be larger than 512 bytes. See Sending GZIP HTML ~ 120kb+ (suggested enhancement).

WebServer and non TLS/SSL WebClient Usage

Class Constructor

  EthernetWebServer server(80);

Creates the EthernetWebServer class object.

Parameters:

host port number: int port (default is the standard HTTP port 80)

Basic Operations

Starting the server

  void begin();

Handling incoming client requests

  void handleClient();

Disabling the server

  void close();
  void stop();

Both methods function the same

Client request handlers

  void on();
  void addHandler();
  void onNotFound();
  void onFileUpload();

Example:

  server.on("/", handlerFunction);
  server.onNotFound(handlerFunction);   // called when handler is not assigned
  server.onFileUpload(handlerFunction); // handle file uploads

Sending responses to the client

  void send();
  void send_P();
  void sendContent_P();

Parameters:

code - HTTP response code, can be 200 or 404, etc.

content_type - HTTP content type, like "text/plain" or "image/png", etc.

content - actual content body

Advanced Options

Getting information about request arguments

  const String & arg();
  const String & argName();
  int args();
  bool hasArg();

Function usage:

arg - get request argument value, use arg("plain") to get POST body

argName - get request argument name

args - get arguments count

hasArg - check if argument exist

Getting information about request headers

  const String & header();
  const String & headerName();
  const String & hostHeader();
  int headers();
  bool hasHeader();

Function usage:

header - get request header value

headerName - get request header name

hostHeader - get request host header if available, else empty string

headers - get header count

hasHeader - check if header exist

Authentication

  bool authenticate();
  void requestAuthentication();

Function usage:

authenticate - server authentication, returns true if client is authenticated else false

requestAuthentication - sends authentication failure response to the client

Example Usage:

  if(!server.authenticate(username, password))
  {
    server.requestAuthentication();
  }

Other Function Calls

  const String & uri(); // get the current uri
  HTTPMethod  method(); // get the current method 
  WiFiClient client(); // get the current client
  HTTPUpload & upload(); // get the current upload
  void setContentLength(); // set content length
  void sendHeader(); // send HTTP header
  void sendContent(); // send content
  void sendContent_P();  // send content in PROGMEM
  void collectHeaders(); // set the request headers to collect
  void serveStatic();
  size_t streamFile();

TLS/SSL WebClient Usage

Have a look at marvellous documentation in SSLClient for more information about the underlying EthernetSSLClient.

The following info is taken and modified from SSLClient README

Overview

Using EthernetSSLClient is similar to using any other Arduino-based Client class. There are a few extra things, however, that you will need to get started:

1. Board and Network Peripheral Requirements

Your board should have a lot of resources (>110kb flash and >7kb RAM), and your network peripheral should have a large internal buffer (>7kb).

2. How to use Trust Anchors TA

You will need a header containing array of trust anchors (trust_anchors), which are used to verify the SSL connection later on. This file must generated for every project if connecting to different TLS/SSL WebServers. Check out TrustAnchors.md on how to generate this file for your project, and for more information about what a trust anchor is.

Once all those are ready, you can create an SSLClient object like this:

// Initialize the SSL client library
// Arguments: EthernetClient, our trust anchors
EthernetClient    client;
EthernetSSLClient sslClient(client, TAs, (size_t)TAs_NUM)

Where:

  • EthernetClient - The type of client
  • client - An instance of the EthernetClient class you are using for EthernetSSLClient. It is important that this instance be stored outside the EthernetSSLClient declaration.

For instance:

EthernetSSLClient(EthernetClient() ...)

wouldn't work.

  • TAs - The name of the trust anchor array created in step 2. If you generated a header using the tutorial this will probably be TAs.
  • TAs_NUM - The number of trust anchors in TAs. If you generated a header using the tutorial this will probably be TAs_NUM.

Given this client, simply use EthernetSSLClient as you would the base client class:

if (sslClient.connect(www.arduino.cc, 443))
{
  // Make a HTTP request:
  sslClient.println(GET /asciilogo.txt HTTP/1.1);
  sslClient.println("User-Agent: SSLClientOverEthernet");
  sslClient.print("Host: ");
  sslClient.println(server);
  sslClient.println("Connection: close");
  sslClient.println();
  sslClient.flush();
}
else
{
  // if you didn't get a connection to the server:
  Serial.println("connection failed");
}
3. Note

sslClient.connect("www.arduino.cc", 443) can take 5-15 seconds to finish. This an unavoidable consequence of the SSL protocol, and is detailed in Implementation Notes.

For more information on EthernetSSLClient, check out the examples, API documentation, or the rest of this README.

How It Works

EthernetSSLClient was created to integrate SSL seamlessly with the Arduino infrastructure, and so it does just that: implementing the brilliant BearSSL as a proxy in front of any Arduino socket library. BearSSL is designed with low flash footprint in mind, and as a result does little verification of improper programming, relying on the developer to ensure the code is correct. Since EthernetSSLClient is built specifically for the Arduino ecosystem, most of EthernetSSLClient's code adds those programming checks back in, making debugging a fast and simple process.

Other Features

Logging

EthernetSSLClient also allows for changing the debugging level by adding an additional parameter to the constructor:

EthernetClient    client;
EthernetSSLClient sslClient(client, TAs, (size_t)TAs_NUM, 1, SSLClient::SSL_INFO);)

Logging is always outputted through the Arduino Serial interface, so you'll need to setup Serial before you can view the SSL logs. Log levels are enumerated in ::DebugLevel. The log level is set to SSL_WARN by default.

Errors

When EthernetSSLClient encounters an error, it will attempt to terminate the SSL session gracefully if possible, and then close the socket. Simple error information can be found from EthernetSSLClient::getWriteError(), which will return a value from the ::Error enum. For more detailed diagnostics, you can look at the serial logs, which will be displayed if the log level is at SSL_ERROR or lower.

Write Buffering

As you may have noticed in the documentation for EthernetSSLClient::write, calling this function does not actually write to the network. Instead, you must call EthernetSSLClient::available or EthernetSSLClient::flush, which will detect that the buffer is ready and write to the network (see EthernetSSLClient::write for details).

This was implemented as a buffered function because examples in Arduino libraries will often write to the network like so:

EthernetClient client;
// ...
// connect to ardiuino.cc over ssl (port 443 for websites)
client.connect("www.arduino.cc", 443);
// ...
// write an http request to the network
client.write("GET /asciilogo.txt HTTP/1.1\r\n");
client.write("Host: arduino.cc\r\n");
client.write("Connection: close\r\n");
// wait for response
while (!client.available()) { /* ... */ }
// ...

Notice that every single write() call immediately writes to the network, which is fine with most network clients. With SSL, however, if we are encrypting and writing to the network every write() call, this will result in a lot of small encryption tasks. Encryption takes a lot of time and code, so to reduce the overhead of an SSL connection, SSLClient::write implicitly buffers until the developer states that they are waiting for data to be received with EthernetSSLClient::available. A simple example can be found below:

// Initialize the SSL client library
// Arguments: EthernetClient, our trust anchors
EthernetClient    client;
EthernetSSLClient sslClient(client, TAs, (size_t)TAs_NUM)

// ...
// connect to arduino.cc over ssl (port 443 for websites)
sslClient.connect("www.arduino.cc", 443);
// ...
// add http request to the buffer
sslClient.write("GET /asciilogo.txt HTTP/1.1\r\n");
sslClient.write("Host: arduino.cc\r\n");
sslClient.write("Connection: close\r\n");

// write the bytes to the network, then wait for response
while (!sslClient.available());
// ...

If you would like to trigger a network write manually without using the EthernetSSLClient::available, you can also call EthernetSSLClient::flush, which will write all data and return when finished.

Session Caching

As detailed in the Resources section, SSL handshakes take an extended period (1-4sec) to negotiate. To remedy this problem, BearSSL is able to keep a SSL session cache of the clients it has connected to. If BearSSL successfully resumes an SSL session, it can reduce connection time to 100-500ms.

In order to use SSL session resumption:

  • The website you are connecting to must support it. Support is widespread, but you can verify easily using the SSLLabs tool.
  • You must reuse the same EthernetSSLClient object (SSL Sessions are stored in the object itself).
  • You must reconnect to the exact same server.

EthernetSSLClient automatically stores an IP address and hostname in each session, ensuring that if you call connect("www.google.com"), EthernetSSLClient will use the SSL session with that hostname. However, because some websites have multiple servers on a single IP address (github.com being an example), you may find that even if you are connecting to the same host the connection does not resume. This is a flaw in the SSL session protocol — though it has been resolved in TLS 1.3, the lack of widespread adoption of the new protocol prevents it from being used here. SSL sessions can also expire based on server criteria, which will result in a standard 4-10 second connection.

SSL sessions take a lot of memory to store, so by default EthernetSSLClient will only store one at a time. You can change this behavior by adding the following to your EthernetSSLClient declaration:

// Initialize the SSL client library
// Arguments: EthernetClient, our trust anchors
EthernetClient    client;
EthernetSSLClient sslClient(client, TAs, (size_t)TAs_NUM, SomeNumber);

Where SomeNumber is the number of sessions you would like to store. For example this declaration can store 3 sessions:

EthernetClient    client;
EthernetSSLClient sslClient(client, TAs, (size_t)TAs_NUM, 3);

Sessions are managed internally using the SSLSession::getSession function. This function will cycle through sessions in a rotating order, allowing the session cache to continually overwrite old sessions. In general, it is a good idea to use a SessionCache size equal to the number of domains you plan on connecting to.

If you need to clear a session, you can do so using the SSLSession::removeSession function.

mTLS

As of v1.6.0, EthernetSSLClient supports mutual TLS authentication. mTLS is a variant of TLS that verifies both the server and device identities before a connection, and is commonly used in IoT protocols as a secure layer (MQTT over TLS, HTTPS over TLS, etc.).

To use mTLS with SSLClient you will need to a client certificate and client private key associated with the server you are attempting to connect to.

Depending on your use case, you will either generate these yourself (ex. Mosquito MQTT setup), or have them generated for you (ex. AWS IoT Certificate Generation). Given this cryptographic information, you can modify the standard EthernetSSLClient connection sketch to enable mTLS authentication:

...
/* Somewhere above setup() */

// The client certificate, can be PEM or DER format
// DER format will be an array of raw bytes, and PEM format will be a string
// PEM format is shown below
const char my_cert[] = 
"-----BEGIN CERTIFICATE-----\n"
"MIIDpDCCAowCCQC7mCk5Iu3YmDANBgkqhkiG9w0BAQUFADCBkzELMAkGA1UEBhMC\n"
...
"-----END CERTIFICATE-----\n";

// The client private key, must be the same format as the client certificate
// Both RSA and ECC are supported, ECC is shown below
const char my_key[] = 
"-----BEGIN EC PRIVATE KEY-----\n"
...
"-----END EC PRIVATE KEY-----\n";

// This line will parse and store the above information so SSLClient can use it later
// Replace `fromPEM` with `fromDER` if you are using DER formatted certificates.
SSLClientParameters mTLS = SSLClientParameters::fromPEM(my_cert, sizeof(cert), my_key, sizeof(key));
EthernetSSLClient my_client(...);
...
void setup() {
    ...
    /* Before SSLClient connects */

    my_client.setMutualAuthParams(mTLS);
    ...
}
...

The client certificate must be formatted correctly (according to BearSSL's specification) in order for mTLS to work. If the certificate is improperly formatted, SSLClient will attempt to make a regular TLS connection instead of an mTLS one, and fail to connect as a result. Because of this, if you are seeing errors similar to "peer did not send certificate chain" on your server, check that your certificate and key are formatted correctly (see MQTT SSL possible?). For more information on SSLClient's mTLS functionality, please see the SSLClientParameters documentation.

Note that both the above client certificate information as well as the correct trust anchors associated with the server are needed for the connection to succeed. Trust anchors will typically be generated from the CA used to generate the server certificate. More information on generating trust anchors can be found in TrustAnchors.md.

Implementation Notes

Some ideas that didn't quite fit in the API documentation.

Seeding Random Data

The SSL protocol requires that EthernetSSLClient generate some random bits before connecting with a server. BearSSL provides a random number generator but requires a some entropy for a seed. Normally this seed is generated by taking the microsecond time using the internal clock, however since most microcontrollers are not build with this feature another source must be found.

Certificate Verification

EthernetSSLClient uses BearSSL's minimal x509 verification engine to verify the certificate of an SSL connection. This engine requires the developer create a trust anchor array using values stored in trusted root certificates. Check out TrustAnchors document for more details on this component of EthernetSSLClient.

BearSSL also features a known certificate validation engine, which only allows for a single domain in exchange for a significantly reduced resource usage (flash and CPU time). This functionality is planned to be implemented in the future.

Resources

The SSL protocol recommends a device support many different encryption algorithms, as well as protocols for SSL itself. The complexity of both of those components results in many medium sized components forming an extremely large whole. Additionally, most embedded processors lack the sophisticated math hardware commonly found in a modern CPU, and as a result require more instructions to create the encryption algorithms SSL requires. This not only increases size but makes the algorithms slow and memory intensive.

If flash footprint is becoming a problem, there are numerous debugging strings (~3kb estimated) that can be removed from SSLClient.h and SSLClient.cpp.

Read Buffer Overflow

SSL is a buffered protocol, and since most microcontrollers have limited resources (see Resources), EthernetSSLClient is limited in the size of its buffers. A common problem encountered with SSL connections is buffer overflow, caused by the server sending too much data at once. This problem is caused by the microcontroller being unable to copy and decrypt data faster than it is being received, forcing some data to be discarded. This usually puts BearSSL in an unrecoverable state, forcing EthernetSSLClient to close the connection with a write error. If you are experiencing frequent timeout problems, this could be the reason why.

In order to remedy this problem, the device must be able to read the data faster than it is being received, or alternatively have a cache large enough to store the entire payload. Since SSL's encryption forces the device to read slowly, this means we must increase the cache size. Depending on your platform, there are a number of ways this can be done:

  • Sometimes your communication shield will have an internal buffer, which can be expanded through the driver code. This is the case with the Arduino Ethernet library (in the form of the MAX_SOCK_NUM and ETHERNET_LARGE_BUFFERS macros), however the library must be modified for the change to take effect.
  • EthernetSSLClient has an internal buffer EthernetSSLClient::m_iobuf, which can be expanded. BearSSL limits the amount of data that can be processed based on the stage in the SSL handshake, and so this will change will have limited usefulness.
  • In some cases, a website will send so much data that even with the above solutions, EthernetSSLClient will be unable to keep up (a website with a lot of HTML is an example). In these cases you will have to find another method of retrieving the data you need.
  • If none of the above are viable, it is possible to implement your own Client class which has an internal buffer much larger than both the driver and BearSSL. This would require in-depth knowledge of programming and the communication shield you are working with, as well as a microcontroller with a significant amount of RAM.

Cipher Support

By default, EthernetSSLClient supports only TLS1.2 and the ciphers listed in TLS12_only_profile.c under suites[], and the list is relatively small to keep the connection secure and the flash footprint down. These ciphers should work for most applications, however if for some reason you would like to use an older version of TLS or a different cipher, you can change the BearSSL profile being used by SSLClient to an alternate one with support for older protocols. To do this, edit EthernetSSLClient::EthernetSSLClient to change these lines:

br_client_init_TLS12_only(&m_sslctx, &m_x509ctx, m_trust_anchors, m_trust_anchors_num);
// comment the above line and uncomment the line below if you're having trouble connecting over SSL
// br_ssl_client_init_full(&m_sslctx, &m_x509ctx, m_trust_anchors, m_trust_anchors_num);

to this:

// br_client_init_TLS12_only(&m_sslctx, &m_x509ctx, m_trust_anchors, m_trust_anchors_num);
// comment the above line and uncomment the line below if you're having trouble connecting over SSL
br_ssl_client_init_full(&m_sslctx, &m_x509ctx, m_trust_anchors, m_trust_anchors_num);

If for some unfortunate reason you need SSL 3.0 or SSL 2.0, you will need to modify the BearSSL profile to enable support. Check out the BearSSL profiles documentation and I wish you the best of luck.

Known Issues

  • In some drivers (Ethernet), calls to Client::flush will hang if internet is available but there is no route to the destination. Unfortunately SSLClient cannot correct for this without modifying the driver itself, and as a result the recommended solution is ensuring you choose a driver with built-in timeouts to prevent freezing. Check Calls to stop before connected cause lockups..

  • When using PubSubClient on the ESP32, a stack overflow will occur if the user does not flush the buffer immediately after writing. The cause of this issue is under active investigation. More information in issue PubSubClient on ESP32 overflows the stack.

HOWTO use STM32F4 with LAN8720

1. Wiring

This is the Wiring for STM32F4 (BLACK_F407VE, etc.) using LAN8720

LAN8720 PHY <---> STM32F4
TX1 <---> PB_13
TX_EN <---> PB_11
TX0 <---> PB_12
RX0 <---> PC_4
RX1 <---> PC_5
nINT/RETCLK <---> PA_1
CRS <---> PA_7
MDIO <---> PA_2
MDC <---> PC_1
GND <---> GND
VCC <---> +3.3V

2. HOWTO program using STLink V-2 or V-3

Connect as follows. To program, use STM32CubeProgrammer or Arduino IDE with

  • U(S)ART Support: "Enabled (generic Serial)"
  • Upload Method : "STM32CubeProgrammer (SWD)"
STLink <---> STM32F4
SWCLK <---> SWCLK
SWDIO <---> SWDIO
RST <---> NRST
GND <---> GND
5v <---> 5V

3. HOWTO use Serial Port for Debugging

Connect FDTI (USB to Serial) as follows:

FDTI <---> STM32F4
RX <---> TX=PA_9
TX <---> RX=PA_10
GND <---> GND

Examples:

WebServer, TLS/SSL Client Examples

  1. AdvancedWebServer
  2. HelloServer
  3. HelloServer2
  4. HttpBasicAuth
  5. MQTTClient_Auth
  6. MQTTClient_Basic
  7. MQTTClient_SSL
  8. MQTTClient_SSL_Auth
  9. MQTTClient_SSL_Complex
  10. PostServer
  11. SimpleAuthentication
  12. UdpNTPClient
  13. UdpSendReceive
  14. WebClient
  15. WebClientMulti_SSL
  16. WebClientRepeating
  17. WebClient_SSL
  18. WebServer
  19. MQTTS_ThingStream
  20. MQTT_ThingStream
  21. AWS_IoT New
  22. multiFileProject New

HTTP and WebSocket Client New Examples

  1. BasicAuthGet
  2. CustomHeader
  3. DweetGet
  4. DweetPost
  5. HueBlink
  6. node_test_server
  7. PostWithHeaders
  8. SimpleDelete
  9. SimpleGet
  10. SimpleHTTPExample
  11. SimplePost
  12. SimplePut
  13. SimpleWebSocket

LAN8720 Examples

  1. MQTTClient_SSL_LAN8720
  2. MQTTClient_SSL_Auth_LAN8720
  3. MQTTClient_SSL_Complex_LAN8720
  4. WebClient_SSL_LAN8720
  5. WebClientMulti_SSL_LAN8720
  6. MQTTS_ThingStream_LAN8720

Example AdvancedWebServer

1. File AdvancedWebServer.ino

EthernetWebServer_SSL_STM32/examples/AdvancedWebServer/AdvancedWebServer.ino

Lines 40 to 270 in 3990bad

/*
Currently support
1) STM32 boards with built-in Ethernet (to use USE_BUILTIN_ETHERNET = true) such as :
- Nucleo-144 (F429ZI, F767ZI)
- Discovery (STM32F746G-DISCOVERY)
- STM32 boards (STM32F/L/H/G/WB/MP1) with 32K+ Flash, with Built-in Ethernet,
- See How To Use Built-in Ethernet at (https://github.com/khoih-prog/EthernetWebServer_STM32/issues/1)
2) STM32F/L/H/G/WB/MP1 boards (with 32+K Flash) running ENC28J60 shields (to use USE_BUILTIN_ETHERNET = false)
3) STM32F/L/H/G/WB/MP1 boards (with 32+K Flash) running W5x00 shields
*/
#include "defines.h"
EthernetWebServer server(80);
const int led = 13;
void handleRoot()
{
digitalWrite(led, 1);
#define BUFFER_SIZE 512
char temp[BUFFER_SIZE];
int sec = millis() / 1000;
int min = sec / 60;
int hr = min / 60;
int day = hr / 24;
hr = hr % 24;
snprintf(temp, BUFFER_SIZE - 1,
"<html>\
<head>\
<meta http-equiv='refresh' content='5'/>\
<title>AdvancedWebServer %s</title>\
<style>\
body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; Color: #000088; }\
</style>\
</head>\
<body>\
<h2>Hi from EthernetWebServer_SSL_STM32!</h2>\
<h3>on %s</h3>\
<p>Uptime: %d d %02d:%02d:%02d</p>\
<img src=\"/test.svg\" />\
</body>\
</html>", BOARD_NAME, BOARD_NAME, day, hr % 24, min % 60, sec % 60);
server.send(200, "text/html", temp);
digitalWrite(led, 0);
}
void handleNotFound()
{
digitalWrite(led, 1);
String message = "File Not Found\n\n";
message += "URI: ";
message += server.uri();
message += "\nMethod: ";
message += (server.method() == HTTP_GET) ? "GET" : "POST";
message += "\nArguments: ";
message += server.args();
message += "\n";
for (uint8_t i = 0; i < server.args(); i++)
{
message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
}
server.send(404, "text/plain", message);
digitalWrite(led, 0);
}
#define ORIGINAL_STR_LEN 2048
void drawGraph()
{
static String out;
static uint16_t previousStrLen = ORIGINAL_STR_LEN;
if (out.length() == 0)
{
ET_LOGWARN1(F("String Len = 0, extend to"), ORIGINAL_STR_LEN);
out.reserve(ORIGINAL_STR_LEN);
}
out = F( "<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" width=\"310\" height=\"150\">\n" \
"<rect width=\"310\" height=\"150\" fill=\"rgb(250, 230, 210)\" stroke-width=\"3\" stroke=\"rgb(0, 0, 0)\" />\n" \
"<g stroke=\"blue\">\n");
char temp[70];
int y = rand() % 130;
for (int x = 10; x < 300; x += 10)
{
int y2 = rand() % 130;
sprintf(temp, "<line x1=\"%d\" y1=\"%d\" x2=\"%d\" y2=\"%d\" stroke-width=\"2\" />\n", x, 140 - y, x + 10, 140 - y2);
out += temp;
y = y2;
}
out += F("</g>\n</svg>\n");
ET_LOGDEBUG1(F("String Len = "), out.length());
if (out.length() > previousStrLen)
{
ET_LOGERROR3(F("String Len > "), previousStrLen, F(", extend to"), out.length() + 48);
previousStrLen = out.length() + 48;
out.reserve(previousStrLen);
}
else
{
server.send(200, "image/svg+xml", out);
}
}
void setup()
{
pinMode(led, OUTPUT);
digitalWrite(led, 0);
Serial.begin(115200);
while (!Serial && millis() < 5000);
Serial.println("\nStart AdvancedWebServer on " + String(BOARD_NAME) + " with " + String(SHIELD_TYPE));
#if USE_ETHERNET_GENERIC
Serial.println(ETHERNET_GENERIC_VERSION);
#endif
Serial.println(ETHERNET_WEBSERVER_SSL_STM32_VERSION);
#if !(USE_BUILTIN_ETHERNET)
#if (USING_SPI2)
#if defined(CUR_PIN_MISO)
ET_LOGWARN(F("Default SPI pinout:"));
ET_LOGWARN1(F("MOSI:"), CUR_PIN_MOSI);
ET_LOGWARN1(F("MISO:"), CUR_PIN_MISO);
ET_LOGWARN1(F("SCK:"), CUR_PIN_SCK);
ET_LOGWARN1(F("SS:"), CUR_PIN_SS);
ET_LOGWARN(F("========================="));
#endif
#else
ET_LOGWARN(F("Default SPI pinout:"));
ET_LOGWARN1(F("MOSI:"), MOSI);
ET_LOGWARN1(F("MISO:"), MISO);
ET_LOGWARN1(F("SCK:"), SCK);
ET_LOGWARN1(F("SS:"), SS);
ET_LOGWARN(F("========================="));
#endif
#endif
#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
// For other boards, to change if necessary
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
Ethernet.init (USE_THIS_SS_PIN);
#elif USE_CUSTOM_ETHERNET
// You have to add initialization for your Custom Ethernet here
// This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough
//Ethernet.init(USE_THIS_SS_PIN);
#endif //( ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
#endif
// start the ethernet connection and the server:
// Use DHCP dynamic IP and random mac
uint16_t index = millis() % NUMBER_OF_MAC;
// Use Static IP
//Ethernet.begin(mac[index], ip);
Ethernet.begin(mac[index]);
Serial.print(F("Connected! IP address: "));
Serial.println(Ethernet.localIP());
server.on("/", handleRoot);
server.on("/test.svg", drawGraph);
server.on("/inline", []()
{
server.send(200, "text/plain", "This works as well");
});
server.onNotFound(handleNotFound);
server.begin();
Serial.print(F("HTTP EthernetWebServer is @ IP : "));
Serial.println(Ethernet.localIP());
}
void heartBeatPrint()
{
static int num = 1;
Serial.print(F("."));
if (num == 80)
{
Serial.println();
num = 1;
}
else if (num++ % 10 == 0)
{
Serial.print(F(" "));
}
}
void check_status()
{
static unsigned long checkstatus_timeout = 0;
#define STATUS_CHECK_INTERVAL 10000L
// Send status report every STATUS_REPORT_INTERVAL (60) seconds: we don't need to send updates frequently if there is no status change.
if ((millis() > checkstatus_timeout) || (checkstatus_timeout == 0))
{
heartBeatPrint();
checkstatus_timeout = millis() + STATUS_CHECK_INTERVAL;
}
}
void loop()
{
server.handleClient();
check_status();
}

2. File defines.h

EthernetWebServer_SSL_STM32/examples/AdvancedWebServer/defines.h

Lines 13 to 224 in 3990bad

#ifndef defines_h
#define defines_h
#if !( defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) ||defined(STM32F4) || defined(STM32F7) || \
defined(STM32L0) || defined(STM32L1) || defined(STM32L4) || defined(STM32H7) ||defined(STM32G0) || defined(STM32G4) || \
defined(STM32WB) || defined(STM32MP1) || defined(STM32L5) )
#error This code is designed to run on STM32F/L/H/G/WB/MP1 platform! Please check your Tools->Board setting.
#endif
#define DEBUG_ETHERNET_WEBSERVER_PORT Serial
// Debug Level from 0 to 4
#define _ETHERNET_WEBSERVER_LOGLEVEL_ 3
// If USE_BUILTIN_ETHERNET == false and USE_UIP_ETHERNET == false =>
// either use W5x00 with EthernetXYZ library
// or ENC28J60 with EthernetENC library
//#define USE_BUILTIN_ETHERNET true
#define USE_BUILTIN_ETHERNET false
//#define USE_UIP_ETHERNET true
#define USE_UIP_ETHERNET false
// To override the default CS/SS pin. Don't use unless you know exactly which pin to use
// You can define here or customize for each board at same place with BOARD_TYPE
//#define USE_THIS_SS_PIN 22 //21 //5 //4 //2 //15
// Default pin 10 to SS/CS. To change according to your board, if necessary
#define USE_THIS_SS_PIN 10
#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
// Only one if the following to be true
#define USE_ETHERNET_GENERIC true
#define USE_ETHERNET_ESP8266 false
#define USE_ETHERNET_ENC false
#define USE_CUSTOM_ETHERNET false
#endif
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ESP8266 || USE_ETHERNET_ENC )
#ifdef USE_CUSTOM_ETHERNET
#undef USE_CUSTOM_ETHERNET
#endif
#define USE_CUSTOM_ETHERNET false //true
#endif
#if (USE_BUILTIN_ETHERNET)
#warning Using LAN8742A Ethernet & STM32Ethernet lib
#define SHIELD_TYPE "LAN8742A Ethernet & STM32Ethernet Library"
#elif (USE_UIP_ETHERNET)
#warning Using ENC28J60 & UIPEthernet lib
#define SHIELD_TYPE "ENC28J60 & UIPEthernet Library"
#elif USE_ETHERNET_GENERIC
#warning Using W5x00 & Ethernet_Generic lib
//#define SHIELD_TYPE "W5x00 using Ethernet_Generic Library"
#elif USE_ETHERNET_ESP8266
#include "Ethernet_ESP8266.h"
#warning Using W5x00 & Ethernet_ESP8266 lib
#define SHIELD_TYPE "W5x00 & Ethernet_ESP8266 Library"
#elif USE_ETHERNET_ENC
#include "EthernetENC.h"
#warning Using ENC28J60 & EthernetENC lib
#define SHIELD_TYPE "ENC28J60 & EthernetENC Library"
#elif USE_CUSTOM_ETHERNET
//#include "Ethernet_XYZ.h"
#include "Ethernet.h"
#warning Using Custom Ethernet library. You must include a library and initialize.
#define SHIELD_TYPE "Custom Ethernet & Ethernet_XYZ Library"
#else
#define USE_ETHERNET_GENERIC true
#warning Using default Ethernet_Generic lib
//#define SHIELD_TYPE "W5x00 using default Ethernet_Generic Library"
#endif
//////////////////////////////////////////////////////////////////////////
#if USE_ETHERNET_GENERIC
#include <SPI.h>
// Be sure to use true only if necessary for your board, or compile error
#define USING_CUSTOM_SPI true
#if ( USING_CUSTOM_SPI )
// Currently test OK for F767ZI and L552ZE_Q
#define USING_SPI2 true
#define SHIELD_TYPE "W5x00 using Ethernet_Generic Library and custom SPI"
#if (USING_SPI2)
// For L552ZE-Q, F767ZI, but you can change the pins for any other boards
// SCK: 23, MOSI: 22, MISO: 25, SS/CS: 24 for SPI1
#define CUR_PIN_MISO 25
#define CUR_PIN_MOSI 22
#define CUR_PIN_SCK 23
#define CUR_PIN_SS 24
#define SPI_NEW_INITIALIZED true
// Don't create the instance with CUR_PIN_SS, or Ethernet not working
// To change for other boards' SPI libraries
SPIClass SPI_New(CUR_PIN_MOSI, CUR_PIN_MISO, CUR_PIN_SCK);
//#warning Using USE_THIS_SS_PIN = CUR_PIN_SS = 24
#if defined(USE_THIS_SS_PIN)
#undef USE_THIS_SS_PIN
#endif
#define USE_THIS_SS_PIN CUR_PIN_SS //24
#endif
#else
#define SHIELD_TYPE "W5x00 using Ethernet_Generic Library"
#endif
#include "Ethernet_Generic.h"
#define ETHERNET_LARGE_BUFFERS
#define _ETG_LOGLEVEL_ 1
#endif
//////////////////////////////////////////////////////////////////////////
#if defined(STM32F0)
#warning STM32F0 board selected
#define BOARD_TYPE "STM32F0"
#elif defined(STM32F1)
#warning STM32F1 board selected
#define BOARD_TYPE "STM32F1"
#elif defined(STM32F2)
#warning STM32F2 board selected
#define BOARD_TYPE "STM32F2"
#elif defined(STM32F3)
#warning STM32F3 board selected
#define BOARD_TYPE "STM32F3"
#elif defined(STM32F4)
#warning STM32F4 board selected
#define BOARD_TYPE "STM32F4"
#elif defined(STM32F7)
#warning STM32F7 board selected
#define BOARD_TYPE "STM32F7"
#elif defined(STM32L0)
#warning STM32L0 board selected
#define BOARD_TYPE "STM32L0"
#elif defined(STM32L1)
#warning STM32L1 board selected
#define BOARD_TYPE "STM32L1"
#elif defined(STM32L4)
#warning STM32L4 board selected
#define BOARD_TYPE "STM32L4"
#elif defined(STM32L5)
#warning STM32L5 board selected
#define BOARD_TYPE "STM32L5"
#elif defined(STM32H7)
#warning STM32H7 board selected
#define BOARD_TYPE "STM32H7"
#elif defined(STM32G0)
#warning STM32G0 board selected
#define BOARD_TYPE "STM32G0"
#elif defined(STM32G4)
#warning STM32G4 board selected
#define BOARD_TYPE "STM32G4"
#elif defined(STM32WB)
#warning STM32WB board selected
#define BOARD_TYPE "STM32WB"
#elif defined(STM32MP1)
#warning STM32MP1 board selected
#define BOARD_TYPE "STM32MP1"
#else
#warning STM32 unknown board selected
#define BOARD_TYPE "STM32 Unknown"
#endif
#ifndef BOARD_NAME
#define BOARD_NAME BOARD_TYPE
#endif
#include <EthernetWebServer_SSL_STM32.h>
// Enter a MAC address and IP address for your controller below.
#define NUMBER_OF_MAC 20
byte mac[][NUMBER_OF_MAC] =
{
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x01 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x02 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x03 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x04 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x05 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x06 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x07 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x08 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x09 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0A },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0B },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0C },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0D },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0E },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x0F },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x10 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x11 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x12 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x13 },
{ 0xDE, 0xAD, 0xBE, 0xEF, 0x32, 0x14 },
};
// Select the IP address according to your local network
IPAddress ip(192, 168, 2, 232);
#endif //defines_h

Debug Terminal Output Samples

1. AdvancedWebServer on NUCLEO_F767ZI using Built-in LAN8742A Ethernet and STM32Ethernet Library

Following is debug terminal output and screen shot when running example AdvancedWebServer on STM32F7 Nucleo-144 NUCLEO_F767ZI using Built-in LAN8742A Ethernet and STM32Ethernet Library

Start AdvancedWebServer on NUCLEO_F767ZI, using LAN8742A Ethernet & STM32Ethernet Library
EthernetWebServer_SSL_STM32 v1.6.0
HTTP EthernetWebServer is @ IP : 192.168.2.117
.[EWS] String Len = 0, extend to 2048
EthernetWebServer::handleClient: New Client
method:  GET
url:  /
search:
headerName: Host
headerValue: 192.168.2.150
headerName: Connection
headerValue: keep-alive
headerName: Cache-Control
headerValue: max-age=0
headerName: DNT
headerValue: 1
headerName: Upgrade-Insecure-Requests
headerValue: 1
headerName: User-Agent
headerValue: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/84.0.4147.89 Safari/537.36
headerName: Accept
headerValue: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9
headerName: Accept-Encoding
headerValue: gzip, deflate
headerName: Accept-Language
headerValue: en-GB,en-US;q=0.9,en;q=0.8
args:
args count:  0
args:
args count:  0
Request: /
Arguments: 
Final list of key/value pairs:
EthernetWebServer::_handleRequest handle
EthernetWebServer::send1: len =  341
content =  <html><head><meta http-equiv='refresh' content='5'/><title>AdvancedWebServer NUCLEO_F767ZI</title><style>body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; Color: #000088; }</style></head><body><h2>Hi from EthernetWebServer!</h2><h3>on NUCLEO_F767ZI</h3><p>Uptime: 0 d 00:00:31</p><img src="/test.svg" /></body></html>
EthernetWebServer::_prepareHeader sendHeader Conn close
EthernetWebServer::send1: write header =  HTTP/1.1 200 OK
Content-Type: text/html
Content-Length: 341
Connection: close

EthernetWebServer::sendContent: Client.write content:  <html><head><meta http-equiv='refresh' content='5'/><title>AdvancedWebServer NUCLEO_F767ZI</title><style>body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; Color: #000088; }</style></head><body><h2>Hi from EthernetWebServer!</h2><h3>on NUCLEO_F767ZI</h3><p>Uptime: 0 d 00:00:31</p><img src="/test.svg" /></body></html>
EthernetWebServer::_handleRequest OK
EthernetWebServer::handleClient: Don't keepCurrentClient
EthernetWebServer::handleClient: Client disconnected
EthernetWebServer::handleClient: New Client
method:  GET
url:  /test.svg
search:
headerName: Host
headerValue: 192.168.2.150
headerName: Connection
headerValue: keep-alive
headerName: User-Agent
headerValue: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/84.0.4147.89 Safari/537.36
headerName: DNT
headerValue: 1
headerName: Accept
headerValue: image/webp,image/apng,image/*,*/*;q=0.8
headerName: Referer
headerValue: http://192.168.2.150/
headerName: Accept-Encoding
headerValue: gzip, deflate
headerName: Accept-Language
headerValue: en-GB,en-US;q=0.9,en;q=0.8
args:
args count:  0
args:
args count:  0
Request: /test.svg
Arguments: 
Final list of key/value pairs:
EthernetWebServer::_handleRequest handle
EthernetWebServer::send1: len =  1949
content =  <svg xmlns="http://www.w3.org/2000/svg" version="1.1" width="310" height="150">
<rect width="310" height="150" fill="rgb(250, 230, 210)" stroke-width="1" stroke="rgb(0, 0, 0)" />
<g stroke="black">
<line x1="10" y1="90" x2="20" y2="22" stroke-width="1" />
<line x1="20" y1="22" x2="30" y2="98" stroke-width="1" />
<line x1="30" y1="98" x2="40" y2="64" stroke-width="1" />
<line x1="40" y1="64" x2="50" y2="104" stroke-width="1" />
<line x1="50" y1="104" x2="60" y2="31" stroke-width="1" />
<line x1="60" y1="31" x2="70" y2="59" stroke-width="1" />
<line x1="70" y1="59" x2="80" y2="139" stroke-width="1" />
<line x1="80" y1="139" x2="90" y2="117" stroke-width="1" />
<line x1="90" y1="117" x2="100" y2="75" stroke-width="1" />
<line x1="100" y1="75" x2="110" y2="72" stroke-width="1" />
<line x1="110" y1="72" x2="120" y2="137" stroke-width="1" />
<line x1="120" y1="137" x2="130" y2="20" stroke-width="1" />
<line x1="130" y1="20" x2="140" y2="94" stroke-width="1" />
<line x1="140" y1="94" x2="150" y2="81" stroke-width="1" />
<line x1="150" y1="81" x2="160" y2="38" stroke-width="1" />
<line x1="160" y1="38" x2="170" y2="33" stroke-width="1" />
<line x1="170" y1="33" x2="180" y2="53" stroke-width="1" />
<line x1="180" y1="53" x2="190" y2="88" stroke-width="1" />
<line x1="190" y1="88" x2="200" y2="32" stroke-width="1" />
<line x1="200" y1="32" x2="210" y2="110" stroke-width="1" />
<line x1="210" y1="110" x2="220" y2="87" stroke-width="1" />
<line x1="220" y1="87" x2="230" y2="11" stroke-width="1" />
<line x1="230" y1="11" x2="240" y2="98" stroke-width="1" />
<line x1="240" y1="98" x2="250" y2="76" stroke-width="1" />
<line x1="250" y1="76" x2="260" y2="121" stroke-width="1" />
<line x1="260" y1="121" x2="270" y2="139" stroke-width="1" />
<line x1="270" y1="139" x2="280" y2="103" stroke-width="1" />
<line x1="280" y1="103" x2="290" y2="60" stroke-width="1" />
<line x1="290" y1="60" x2="300" y2="36" stroke-width="1" />
</g>
</svg>

EthernetWebServer::_prepareHeader sendHeader Conn close
EthernetWebServer::send1: write header =  HTTP/1.1 200 OK
Content-Type: image/svg+xml
Content-Length: 1949
Connection: close

2. WebClientRepeating on NUCLEO_F767ZI using ENC28J60 and new EthernetENC Library

The following is debug terminal output when running example WebClientRepeating on STM32F7 Nucleo-144 NUCLEO_F767ZI using ENC28J60 and new EthernetENC Library

Start WebClientRepeating on NUCLEO_F767ZI, using ENC28J60 & EthernetENC Library
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
You're connected to the network, IP = 192.168.2.123
Connecting...
HTTP/1.1 200 OK
Date: Wed, 27 Apr 2022 17:12:43 GMT
Content-Type: text/plain
Content-Length: 2263
Connection: close
x-amz-id-2: Y0KDwqmE5CUvFMSLnxWUV4XoqEDCUL1h9GN+vWHRz7vpjDK77h8fqAbuEqBXVEZRm3Ybv7bCZtE=
x-amz-request-id: EFJSRB21CQFZQDRX
Last-Modified: Wed, 23 Feb 2022 14:56:42 GMT
ETag: "667cf48afcc12c38c8c1637947a04224"
CF-Cache-Status: DYNAMIC
Report-To: {"endpoints":[{"url":"https:\/\/a.nel.cloudflare.com\/report\/v3?s=T2F7koaxDm8y3draFWHzKSKtqF3brIseyVbvIpy%2FDp4RGAh7d6Lc%2F7rw%2B96w7hYckhvRgN1l9sMJJuNuQCxG8JZeCIelNLNXDBKH5BJajxjC7kMiQ3PwdUm8jFr%2B0aA%3D"}],"group":"cf-nel","max_age":604800}
NEL: {"success_fraction":0,"report_to":"cf-nel","max_age":604800}
Server: cloudflare
CF-RAY: 70292f44ceb3a253-YYZ
alt-svc: h3=":443"; ma=86400, h3-29=":443"; ma=86400


           `:;;;,`                      .:;;:.           
        .;;;;;;;;;;;`                :;;;;;;;;;;:     TM 
      `;;;;;;;;;;;;;;;`            :;;;;;;;;;;;;;;;      
     :;;;;;;;;;;;;;;;;;;         `;;;;;;;;;;;;;;;;;;     
    ;;;;;;;;;;;;;;;;;;;;;       .;;;;;;;;;;;;;;;;;;;;    
   ;;;;;;;;:`   `;;;;;;;;;     ,;;;;;;;;.`   .;;;;;;;;   
  .;;;;;;,         :;;;;;;;   .;;;;;;;          ;;;;;;;  
  ;;;;;;             ;;;;;;;  ;;;;;;,            ;;;;;;. 
 ,;;;;;               ;;;;;;.;;;;;;`              ;;;;;; 
 ;;;;;.                ;;;;;;;;;;;`      ```       ;;;;;`
 ;;;;;                  ;;;;;;;;;,       ;;;       .;;;;;
`;;;;:                  `;;;;;;;;        ;;;        ;;;;;
,;;;;`    `,,,,,,,,      ;;;;;;;      .,,;;;,,,     ;;;;;
:;;;;`    .;;;;;;;;       ;;;;;,      :;;;;;;;;     ;;;;;
:;;;;`    .;;;;;;;;      `;;;;;;      :;;;;;;;;     ;;;;;
.;;;;.                   ;;;;;;;.        ;;;        ;;;;;
 ;;;;;                  ;;;;;;;;;        ;;;        ;;;;;
 ;;;;;                 .;;;;;;;;;;       ;;;       ;;;;;,
 ;;;;;;               `;;;;;;;;;;;;                ;;;;; 
 `;;;;;,             .;;;;;; ;;;;;;;              ;;;;;; 
  ;;;;;;:           :;;;;;;.  ;;;;;;;            ;;;;;;  
   ;;;;;;;`       .;;;;;;;,    ;;;;;;;;        ;;;;;;;:  
    ;;;;;;;;;:,:;;;;;;;;;:      ;;;;;;;;;;:,;;;;;;;;;;   
    `;;;;;;;;;;;;;;;;;;;.        ;;;;;;;;;;;;;;;;;;;;    
      ;;;;;;;;;;;;;;;;;           :;;;;;;;;;;;;;;;;:     
       ,;;;;;;;;;;;;;,              ;;;;;;;;;;;;;;       
         .;;;;;;;;;`                  ,;;;;;;;;:         
                                                         
                                                         
                                                         
                                                         
    ;;;   ;;;;;`  ;;;;:  .;;  ;; ,;;;;;, ;;. `;,  ;;;;   
    ;;;   ;;:;;;  ;;;;;; .;;  ;; ,;;;;;: ;;; `;, ;;;:;;  
   ,;:;   ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;,`;, ;;  ;;  
   ;; ;:  ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;;`;, ;;  ;;. 
   ;: ;;  ;;;;;:  ;;  ;; .;;  ;;   ,;,   ;;`;;;, ;;  ;;` 
  ,;;;;;  ;;`;;   ;;  ;; .;;  ;;   ,;,   ;; ;;;, ;;  ;;  
  ;;  ,;, ;; .;;  ;;;;;:  ;;;;;: ,;;;;;: ;;  ;;, ;;;;;;  
  ;;   ;; ;;  ;;` ;;;;.   `;;;:  ,;;;;;, ;;  ;;,  ;;;;

3. UdpNTPClient on NUCLEO_F767ZI using W5500 and Ethernet_Generic Library

  1. The following is debug terminal output when running example UdpNTPClient on STM32F7 Nucleo-144 NUCLEO_F767ZI using W5500 and Ethernet_Generic Library
Start UdpNTPClient on NUCLEO_F767ZI, using W5x00 & Ethernet_Generic Library
Ethernet_Generic v2.7.1
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
You're connected to the network, IP = 192.168.2.123
UDP Packet received, size 48
From 132.163.97.1, port 123
Seconds since Jan 1 1900 = 3809283621
Unix time = 1600294821
The UTC time is 22:20:21

4. WebClient_SSL on NUCLEO_F767ZI using Built-in LAN8742A Ethernet and STM32Ethernet Library

  1. The terminal output of NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library running WebClient_SSL example
Start WebClient_SSL on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] =========================
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
=========================
Currently Used SPI pinout:
MOSI:11
MISO:12
SCK:13
SS:10
=========================
Using mac index = 10
Connected! IP address: 192.168.2.139
Connecting to : www.arduino.cc, port : 443
Connected to www.arduino.cc
Took: 480
Using micros()
2A 5C A7 84 DC 48 AB 3E C6 80 4E E D8 88 4C FE 
Using analogRead()
3E 76 9B B8 CD E9 F4 FE 8 D 12 14 C 1B 20 1D 
HTTP/1.1 200 OK
Date: Tue, 10 Nov 2020 08:33:53 GMT
Content-Type: text/plain
Transfer-Encoding: chunked
Connection: close
Set-Cookie: __cfduid=de77338a7e6c914c4dd309cecf5dcdb3b1604997233; expires=Thu, 10-Dec-20 08:33:53 GMT; path=/; domain=.arduino.cc; HttpOnly; SameSite=Lax
Last-Modified: Wed, 02 Oct 2013 13:46:47 GMT
Vary: Accept-Encoding
Access-Control-Allow-Origin: https://www.arduino.cc
Access-Control-Allow-Credentials: true
Access-Control-Allow-Methods: GET, POST, PUT, DELETE, OPTIONS
Access-Control-Allow-Headers: Accept,Authorization,Cache-Control,Content-Type,DNT,If-Modified-Since,Keep-Alive,Origin,User-Agent,X-Mx-ReqToken,X-Requested-With
Strict-Transport-Security: max-age=500; includeSubDomains
X-Frame-Options: SAMEORIGIN
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block
CF-Cache-Status: DYNAMIC
cf-request-id: 0652e352a40000b683be849000000001
Expect-CT: max-age=604800, report-uri="https://report-uri.cloudflare.com/cdn-cgi/beacon/expect-ct"
Server: cloudflare
CF-RAY: 5efe6e643ecfb683-YWG

8d7

           `:;;;,`                      .:;;:.           
        .;;;;;;;;;;;`                :;;;;;;;;;;:     TM 
      `;;;;;;;;;;;;;;;`            :;;;;;;;;;;;;;;;      
     :;;;;;;;;;;;;;;;;;;         `;;;;;;;;;;;;;;;;;;     
    ;;;;;;;;;;;;;;;;;;;;;       .;;;;;;;;;;;;;;;;;;;;    
   ;;;;;;;;:`   `;;;;;;;;;     ,;;;;;;;;.`   .;;;;;;;;   
  .;;;;;;,         :;;;;;;;   .;;;;;;;          ;;;;;;;  
  ;;;;;;             ;;;;;;;  ;;;;;;,            ;;;;;;. 
 ,;;;;;               ;;;;;;.;;;;;;`              ;;;;;; 
 ;;;;;.                ;;;;;;;;;;;`      ```       ;;;;;`
 ;;;;;                  ;;;;;;;;;,       ;;;       .;;;;;
`;;;;:                  `;;;;;;;;        ;;;        ;;;;;
,;;;;`    `,,,,,,,,      ;;;;;;;      .,,;;;,,,     ;;;;;
:;;;;`    .;;;;;;;;       ;;;;;,      :;;;;;;;;     ;;;;;
:;;;;`    .;;;;;;;;      `;;;;;;      :;;;;;;;;     ;;;;;
.;;;;.                   ;;;;;;;.        ;;;        ;;;;;
 ;;;;;                  ;;;;;;;;;        ;;;        ;;;;;
 ;;;;;                 .;;;;;;;;;;       ;;;       ;;;;;,
 ;;;;;;               `;;;;;;;;;;;;                ;;;;; 
 `;;;;;,             .;;;;;; ;;;;;;;              ;;;;;; 
  ;;;;;;:           :;;;;;;.  ;;;;;;;            ;;;;;;  
   ;;;;;;;`       .;;;;;;;,    ;;;;;;;;        ;;;;;;;:  
    ;;;;;;;;;:,:;;;;;;;;;:      ;;;;;;;;;;:,;;;;;;;;;;   
    `;;;;;;;;;;;;;;;;;;;.        ;;;;;;;;;;;;;;;;;;;;    
      ;;;;;;;;;;;;;;;;;           :;;;;;;;;;;;;;;;;:     
       ,;;;;;;;;;;;;;,              ;;;;;;;;;;;;;;       
         .;;;;;;;;;`                  ,;;;;;;;;:         
                                                         
                                                         
                                                         
                                                         
    ;;;   ;;;;;`  ;;;;:  .;;  ;; ,;;;;;, ;;. `;,  ;;;;   
    ;;;   ;;:;;;  ;;;;;; .;;  ;; ,;;;;;: ;;; `;, ;;;:;;  
   ,;:;   ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;,`;, ;;  ;;  
   ;; ;:  ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;;`;, ;;  ;;. 
   ;: ;;  ;;;;;:  ;;  ;; .;;  ;;   ,;,   ;;`;;;, ;;  ;;` 
  ,;;;;;  ;;`;;   ;;  ;; .;;  ;;   ,;,   ;; ;;;, ;;  ;;  
  ;;  ,;, ;; .;;  ;;;;;:  ;;;;;: ,;;;;;: ;;  ;;, ;;;;;;  
  ;;   ;; ;;  ;;` ;;;;.   `;;;:  ,;;;;;, ;;  ;;,  ;;;;   

0

(EthernetSSLClient)(SSL_WARN)(connected): Socket was dropped unexpectedly (this can be an alternative to closing the connection)

Disconnecting.
Received 3324 bytes in 0.5398 s, rate = 6.16 kbytes/second

5. WebClient_SSL on NUCLEO_F767ZI using W5x00 and Ethernet_Generic Library

The terminal output of NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library running WebClient_SSL example

Start WebClient_SSL on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
Ethernet_Generic v2.7.1
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] =========== USE_ETHERNET_GENERIC ===========
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
=========================
Currently Used SPI pinout:
MOSI:11
MISO:12
SCK:13
SS:10
SPI_CS:10
=========================
Using mac index = 10
Connected! IP address: 192.168.2.139
Connecting to : www.arduino.cc, port : 443
Connected to www.arduino.cc
Took: 421
HTTP/1.1 200 OK
Date: Tue, 10 Nov 2020 08:42:12 GMT
Content-Type: text/plain
Transfer-Encoding: chunked
Connection: close
Set-Cookie: __cfduid=dc0d46f4fc488c76630a1c7327c64d5861604997732; expires=Thu, 10-Dec-20 08:42:12 GMT; path=/; domain=.arduino.cc; HttpOnly; SameSite=Lax
Last-Modified: Wed, 02 Oct 2013 13:46:47 GMT
Vary: Accept-Encoding
Access-Control-Allow-Origin: https://www.arduino.cc
Access-Control-Allow-Credentials: true
Access-Control-Allow-Methods: GET, POST, PUT, DELETE, OPTIONS
Access-Control-Allow-Headers: Accept,Authorization,Cache-Control,Content-Type,DNT,If-Modified-Since,Keep-Alive,Origin,User-Agent,X-Mx-ReqToken,X-Requested-With
Strict-Transport-Security: max-age=500; includeSubDomains
X-Frame-Options: SAMEORIGIN
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block
CF-Cache-Status: DYNAMIC
cf-request-id: 0652eaf1aa0000cabc368f8000000001
Expect-CT: max-age=604800, report-uri="https://report-uri.cloudflare.com/cdn-cgi/beacon/expect-ct"
Server: cloudflare
CF-RAY: 5efe7a95dacecabc-YYZ
alt-svc: h3-27=":443"; ma=86400, h3-28=":443"; ma=86400, h3-29=":443"; ma=86400

8d7

           `:;;;,`                      .:;;:.           
        .;;;;;;;;;;;`                :;;;;;;;;;;:     TM 
      `;;;;;;;;;;;;;;;`            :;;;;;;;;;;;;;;;      
     :;;;;;;;;;;;;;;;;;;         `;;;;;;;;;;;;;;;;;;     
    ;;;;;;;;;;;;;;;;;;;;;       .;;;;;;;;;;;;;;;;;;;;    
   ;;;;;;;;:`   `;;;;;;;;;     ,;;;;;;;;.`   .;;;;;;;;   
  .;;;;;;,         :;;;;;;;   .;;;;;;;          ;;;;;;;  
  ;;;;;;             ;;;;;;;  ;;;;;;,            ;;;;;;. 
 ,;;;;;               ;;;;;;.;;;;;;`              ;;;;;; 
 ;;;;;.                ;;;;;;;;;;;`      ```       ;;;;;`
 ;;;;;                  ;;;;;;;;;,       ;;;       .;;;;;
`;;;;:                  `;;;;;;;;        ;;;        ;;;;;
,;;;;`    `,,,,,,,,      ;;;;;;;      .,,;;;,,,     ;;;;;
:;;;;`    .;;;;;;;;       ;;;;;,      :;;;;;;;;     ;;;;;
:;;;;`    .;;;;;;;;      `;;;;;;      :;;;;;;;;     ;;;;;
.;;;;.                   ;;;;;;;.        ;;;        ;;;;;
 ;;;;;                  ;;;;;;;;;        ;;;        ;;;;;
 ;;;;;                 .;;;;;;;;;;       ;;;       ;;;;;,
 ;;;;;;               `;;;;;;;;;;;;                ;;;;; 
 `;;;;;,             .;;;;;; ;;;;;;;              ;;;;;; 
  ;;;;;;:           :;;;;;;.  ;;;;;;;            ;;;;;;  
   ;;;;;;;`       .;;;;;;;,    ;;;;;;;;        ;;;;;;;:  
    ;;;;;;;;;:,:;;;;;;;;;:      ;;;;;;;;;;:,;;;;;;;;;;   
    `;;;;;;;;;;;;;;;;;;;.        ;;;;;;;;;;;;;;;;;;;;    
      ;;;;;;;;;;;;;;;;;           :;;;;;;;;;;;;;;;;:     
       ,;;;;;;;;;;;;;,              ;;;;;;;;;;;;;;       
         .;;;;;;;;;`                  ,;;;;;;;;:         
                                                         
                                                         
                                                         
                                                         
    ;;;   ;;;;;`  ;;;;:  .;;  ;; ,;;;;;, ;;. `;,  ;;;;   
    ;;;   ;;:;;;  ;;;;;; .;;  ;; ,;;;;;: ;;; `;, ;;;:;;  
   ,;:;   ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;,`;, ;;  ;;  
   ;; ;:  ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;;`;, ;;  ;;. 
   ;: ;;  ;;;;;:  ;;  ;; .;;  ;;   ,;,   ;;`;;;, ;;  ;;` 
  ,;;;;;  ;;`;;   ;;  ;; .;;  ;;   ,;,   ;; ;;;, ;;  ;;  
  ;;  ,;, ;; .;;  ;;;;;:  ;;;;;: ,;;;;;: ;;  ;;, ;;;;;;  
  ;;   ;; ;;  ;;` ;;;;.   `;;;:  ,;;;;;, ;;  ;;,  ;;;;   

0

(EthernetSSLClient)(SSL_WARN)(connected): Socket was dropped unexpectedly (this can be an alternative to closing the connection)

Disconnecting.
Received 3405 bytes in 0.4360 s, rate = 7.81 kbytes/second

6. WebClientMulti_SSL on NUCLEO_F767ZI using ENC28J60 and EthernetENC Library

The terminal output of NUCLEO_F767ZI with ENC28J60 & EthernetENC Library running WebClientMulti_SSL example

Start WebClientMulti_SSL on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] =========================
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
=========================
Currently Used SPI pinout:
MOSI:11
MISO:12
SCK:13
SS:10
=========================
Using mac index = 10
Connected! IP address: 192.168.2.139
Connecting to www.arduino.cc...
Took: 2261
HTTP/1.1 200 OK
Date: Tue, 10 Nov 2020 09:24:02 GMT
Content-Type: text/plain
Transfer-Encoding: chunked
Connection: close
Set-Cookie: __cfduid=d588a3b3b35b8e56eb1b7031f46c283b91605000242; expires=Thu, 10-Dec-20 09:24:02 GMT; path=/; domain=.arduino.cc; HttpOnly; SameSite=Lax
Last-Modified: Wed, 02 Oct 2013 13:46:47 GMT
Vary: Accept-Encoding
Access-Control-Allow-Origin: https://www.arduino.cc
Access-Control-Allow-Credentials: true
Access-Control-Allow-Methods: GET, POST, PUT, DELETE, OPTIONS
Access-Control-Allow-Headers: Accept,Authorization,Cache-Control,Content-Type,DNT,If-Modified-Since,Keep-Alive,Origin,User-Agent,X-Mx-ReqToken,X-Requested-With
Strict-Transport-Security: max-age=500; includeSubDomains
X-Frame-Options: SAMEORIGIN
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block
CF-Cache-Status: DYNAMIC
cf-request-id: 0653113b580000b65f28017000000001
Expect-CT: max-age=604800, report-uri="https://report-uri.cloudflare.com/cdn-cgi/beacon/expect-ct"
Server: cloudflare
CF-RAY: 5efeb7d88c03b65f-YWG

8d7

           `:;;;,`                      .:;;:.           
        .;;;;;;;;;;;`                :;;;;;;;;;;:     TM 
      `;;;;;;;;;;;;;;;`            :;;;;;;;;;;;;;;;      
     :;;;;;;;;;;;;;;;;;;         `;;;;;;;;;;;;;;;;;;     
    ;;;;;;;;;;;;;;;;;;;;;       .;;;;;;;;;;;;;;;;;;;;    
   ;;;;;;;;:`   `;;;;;;;;;     ,;;;;;;;;.`   .;;;;;;;;   
  .;;;;;;,         :;;;;;;;   .;;;;;;;          ;;;;;;;  
  ;;;;;;             ;;;;;;;  ;;;;;;,            ;;;;;;. 
 ,;;;;;               ;;;;;;.;;;;;;`              ;;;;;; 
 ;;;;;.                ;;;;;;;;;;;`      ```       ;;;;;`
 ;;;;;                  ;;;;;;;;;,       ;;;       .;;;;;
`;;;;:                  `;;;;;;;;        ;;;        ;;;;;
,;;;;`    `,,,,,,,,      ;;;;;;;      .,,;;;,,,     ;;;;;
:;;;;`    .;;;;;;;;       ;;;;;,      :;;;;;;;;     ;;;;;
:;;;;`    .;;;;;;;;      `;;;;;;      :;;;;;;;;     ;;;;;
.;;;;.                   ;;;;;;;.        ;;;        ;;;;;
 ;;;;;                  ;;;;;;;;;        ;;;        ;;;;;
 ;;;;;                 .;;;;;;;;;;       ;;;       ;;;;;,
 ;;;;;;               `;;;;;;;;;;;;                ;;;;; 
 `;;;;;,             .;;;;;; ;;;;;;;              ;;;;;; 
  ;;;;;;:           :;;;;;;.  ;;;;;;;            ;;;;;;  
   ;;;;;;;`       .;;;;;;;,    ;;;;;;;;        ;;;;;;;:  
    ;;;;;;;;;:,:;;;;;;;;;:      ;;;;;;;;;;:,;;;;;;;;;;   
    `;;;;;;;;;;;;;;;;;;;.        ;;;;;;;;;;;;;;;;;;;;    
      ;;;;;;;;;;;;;;;;;           :;;;;;;;;;;;;;;;;:     
       ,;;;;;;;;;;;;;,              ;;;;;;;;;;;;;;       
         .;;;;;;;;;`                  ,;;;;;;;;:         
                                                         
                                                         
                                                         
                                                         
    ;;;   ;;;;;`  ;;;;:  .;;  ;; ,;;;;;, ;;. `;,  ;;;;   
    ;;;   ;;:;;;  ;;;;;; .;;  ;; ,;;;;;: ;;; `;, ;;;:;;  
   ,;:;   ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;,`;, ;;  ;;  
   ;; ;:  ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;;`;, ;;  ;;. 
   ;: ;;  ;;;;;:  ;;  ;; .;;  ;;   ,;,   ;;`;;;, ;;  ;;` 
  ,;;;;;  ;;`;;   ;;  ;; .;;  ;;   ,;,   ;; ;;;, ;;  ;;  
  ;;  ,;, ;; .;;  ;;;;;:  ;;;;;: ,;;;;;: ;;  ;;, ;;;;;;  
  ;;   ;; ;;  ;;` ;;;;.   `;;;:  ,;;;;;, ;;  ;;,  ;;;;   

0

(EthernetSSLClient)(SSL_WARN)(connected): Socket was dropped unexpectedly (this can be an alternative to closing the connection)

Disconnecting.
Received 3324 bytes in 0.3587 s, rate = 9.27 kbytes/second
Connecting to www.cloudflare.com...
Took: 1683
HTTP/1.1 200 OK
Date: Tue, 10 Nov 2020 09:24:09 GMT
Content-Type: text/plain
Transfer-Encoding: chunked
Connection: close
Set-Cookie: __cfduid=d14958859d5dad28f89ca90056c3547b91605000249; expires=Thu, 10-Dec-20 09:24:09 GMT; path=/; domain=.www.cloudflare.com; HttpOnly; SameSite=Lax; Secure
Access-Control-Allow-Origin: *
Server: cloudflare
CF-RAY: 5efeb8061b0eb65f-YWG
X-Frame-Options: SAMEORIGIN
Expires: Thu, 01 Jan 1970 00:00:01 GMT
Cache-Control: no-cache

bb
fl=168f4
h=www.cloudflare.com
ip=76.10.180.220
ts=1605000249.298
visit_scheme=https
uag=SSLClientOverEthernet
colo=YWG
http=http/1.1
loc=CA
tls=TLSv1.2
sni=plaintext
warp=off
gateway=off

0

(EthernetSSLClient)(SSL_WARN)(connected): Socket was dropped unexpectedly (this can be an alternative to closing the connection)

Disconnecting.
Received 3998 bytes in 0.0656 s, rate = 60.98 kbytes/second

7. MQTTClient_SSL_Complex on NUCLEO_F767ZI using Built-in LAN8742A Ethernet and STM32Ethernet Library

The terminal output of NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library running MQTTClient_SSL_Complex example

Start MQTTClient_SSL_Complex on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
You're connected to the network, IP = 192.168.2.96
Attempting MQTT connection to broker.emqx.io...connected
Published connection message successfully!
Subscribed to: STM32_Sub
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 6990
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 6990
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 11992
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 11992
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 16998
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 16998
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 22004
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 22004
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 27010
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 27010
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 32016
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 32016

8. MQTTClient_SSL_Complex on NUCLEO_F767ZI using W5x00 and Ethernet_Generic Library

The terminal output of NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library running MQTTClient_SSL_Complex example

Start MQTTClient_SSL_Complex on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
Ethernet_Generic v2.7.1
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
You're connected to the network, IP = 192.168.2.107
Attempting MQTT connection to broker.emqx.io...connected
Published connection message successfully!
Subscribed to: STM32_Sub
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 5001
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 5001
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 10007
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 10007
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 15013
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 15013
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 20019
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 20019
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 25025
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex on NUCLEO_F767ZI, millis = 25025

9. MQTTS_ThingStream on NUCLEO_F767ZI using Built-in LAN8742A Ethernet and STM32Ethernet Library

The terminal output of NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library running MQTTS_ThingStream example

Start MQTTS_ThingStream on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
You're connected to the network, IP = 192.168.2.97
***************************************
esp32-sniffer/12345678/ble
***************************************
Attempting MQTT connection to mqtt.thingstream.io
...connected
Published connection message successfully!
Subscribed to: esp32-sniffer/12345678/ble
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library

10. MQTTS_ThingStream on NUCLEO_F767ZI using ENC28J60 and EthernetENC Library

The terminal output of NUCLEO_F767ZI with ENC28J60 & EthernetENC Library running MQTTS_ThingStream example

Start MQTTS_ThingStream_ThingStream on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
You're connected to the network, IP = 192.168.2.97
***************************************
esp32-sniffer/12345678/ble
***************************************
Attempting MQTT connection to mqtt.thingstream.io
...connected
Published connection message successfully!
Subscribed to: esp32-sniffer/12345678/ble
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream_ThingStream on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream_ThingStream on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream_ThingStream on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream_ThingStream on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream_ThingStream on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream_ThingStream on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library

11. MQTTS_ThingStream on NUCLEO_F767ZI using W5x00 and Ethernet_Generic Library

The terminal output of NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library running MQTTS_ThingStream example

Start MQTTS_ThingStream_ThingStream on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
Ethernet_Generic v2.7.1
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
You're connected to the network, IP = 192.168.2.107
***************************************
esp32-sniffer/12345678/ble
***************************************
Attempting MQTT connection to mqtt.thingstream.io
...connected
Published connection message successfully!
Subscribed to: esp32-sniffer/12345678/ble
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library

12. MQTTS_ThingStream_LAN8720 on BLACK_F407VE with LAN8720 Ethernet and STM32Ethernet Library

The terminal output of BLACK_F407VE with LAN8720 Ethernet and STM32Ethernet Library running MQTTS_ThingStream_LAN8720 example

Start MQTTS_ThingStream_ThingStream on on BLACK_F407VE with LAN8720 Ethernet & STM32Ethernet Library
EthernetWebServer_SSL_STM32 v1.6.0
You're connected to the network, IP = 192.168.2.107
***************************************
esp32-sniffer/12345678/ble
***************************************
Attempting MQTT connection to mqtt.thingstream.io
...connected
Published connection message successfully!
Subscribed to: esp32-sniffer/12345678/ble
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on BLACK_F407VE with LAN8720 Ethernet & STM32Ethernet Library
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on BLACK_F407VE with LAN8720 Ethernet & STM32Ethernet Library
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on BLACK_F407VE with LAN8720 Ethernet & STM32Ethernet Library
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on BLACK_F407VE with LAN8720 Ethernet & STM32Ethernet Library
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on BLACK_F407VE with LAN8720 Ethernet & STM32Ethernet Library

13. WebClient_SSL_LAN8720 on BLACK_F407VE with LAN8720 Ethernet and STM32Ethernet Library

The terminal output of BLACK_F407VE with LAN8720 Ethernet and STM32Ethernet Library running WebClient_SSL_LAN8720 example

Start WebClient_SSL_LAN8720 on BLACK_F407VE with LAN8720 Ethernet & STM32Ethernet Library
EthernetWebServer_SSL_STM32 v1.6.0
Using mac index = 6
Connected! IP address: 192.168.2.138
Connecting to : www.arduino.cc, port : 443
Connected to www.arduino.cc
Took: 776
HTTP/1.1 200 OK
Date: Sun, 11 Apr 2021 18:32:19 GMT
Content-Type: text/plain
Transfer-Encoding: chunked
Connection: close
Set-Cookie: __cfduid=d3798c650bbc319e17e80cc276988dd3c1618165939; expires=Tue, 11-May-21 18:32:19 GMT; path=/; domain=.arduino.cc; HttpOnly; SameSite=Lax
Last-Modified: Wed, 02 Oct 2013 13:46:47 GMT
Vary: Accept-Encoding
Strict-Transport-Security: max-age=500; includeSubDomains
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block
CF-Cache-Status: DYNAMIC
cf-request-id: 0963cdd4ce0000f97deeac8000000001
Expect-CT: max-age=604800, report-uri="https://report-uri.cloudflare.com/cdn-cgi/beacon/expect-ct"
Server: cloudflare
CF-RAY: 63e64c014c93f97d-YYZ
alt-svc: h3-27=":443"; ma=86400, h3-28=":443"; ma=86400, h3-29=":443"; ma=86400

8d7

           `:;;;,`                      .:;;:.           
        .;;;;;;;;;;;`                :;;;;;;;;;;:     TM 
      `;;;;;;;;;;;;;;;`            :;;;;;;;;;;;;;;;      
     :;;;;;;;;;;;;;;;;;;         `;;;;;;;;;;;;;;;;;;     
    ;;;;;;;;;;;;;;;;;;;;;       .;;;;;;;;;;;;;;;;;;;;    
   ;;;;;;;;:`   `;;;;;;;;;     ,;;;;;;;;.`   .;;;;;;;;   
  .;;;;;;,         :;;;;;;;   .;;;;;;;          ;;;;;;;  
  ;;;;;;             ;;;;;;;  ;;;;;;,            ;;;;;;. 
 ,;;;;;               ;;;;;;.;;;;;;`              ;;;;;; 
 ;;;;;.                ;;;;;;;;;;;`      ```       ;;;;;`
 ;;;;;                  ;;;;;;;;;,       ;;;       .;;;;;
`;;;;:                  `;;;;;;;;        ;;;        ;;;;;
,;;;;`    `,,,,,,,,      ;;;;;;;      .,,;;;,,,     ;;;;;
:;;;;`    .;;;;;;;;       ;;;;;,      :;;;;;;;;     ;;;;;
:;;;;`    .;;;;;;;;      `;;;;;;      :;;;;;;;;     ;;;;;
.;;;;.                   ;;;;;;;.        ;;;        ;;;;;
 ;;;;;                  ;;;;;;;;;        ;;;        ;;;;;
 ;;;;;                 .;;;;;;;;;;       ;;;       ;;;;;,
 ;;;;;;               `;;;;;;;;;;;;                ;;;;; 
 `;;;;;,             .;;;;;; ;;;;;;;              ;;;;;; 
  ;;;;;;:           :;;;;;;.  ;;;;;;;            ;;;;;;  
   ;;;;;;;`       .;;;;;;;,    ;;;;;;;;        ;;;;;;;:  
    ;;;;;;;;;:,:;;;;;;;;;:      ;;;;;;;;;;:,;;;;;;;;;;   
    `;;;;;;;;;;;;;;;;;;;.        ;;;;;;;;;;;;;;;;;;;;    
      ;;;;;;;;;;;;;;;;;           :;;;;;;;;;;;;;;;;:     
       ,;;;;;;;;;;;;;,              ;;;;;;;;;;;;;;       
         .;;;;;;;;;`                  ,;;;;;;;;:         
                                                         
                                                         
                                                         
                                                         
    ;;;   ;;;;;`  ;;;;:  .;;  ;; ,;;;;;, ;;. `;,  ;;;;   
    ;;;   ;;:;;;  ;;;;;; .;;  ;; ,;;;;;: ;;; `;, ;;;:;;  
   ,;:;   ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;,`;, ;;  ;;  
   ;; ;:  ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;;`;, ;;  ;;. 
   ;: ;;  ;;;;;:  ;;  ;; .;;  ;;   ,;,   ;;`;;;, ;;  ;;` 
  ,;;;;;  ;;`;;   ;;  ;; .;;  ;;   ,;,   ;; ;;;, ;;  ;;  
  ;;  ,;, ;; .;;  ;;;;;:  ;;;;;: ,;;;;;: ;;  ;;, ;;;;;;  
  ;;   ;; ;;  ;;` ;;;;.   `;;;:  ,;;;;;, ;;  ;;,  ;;;;   

0

(EthernetSSLClient)(SSL_WARN)(connected): Socket was dropped unexpectedly (this can be an alternative to closing the connection)

Disconnecting.
Received 3059 bytes in 0.4299 s, rate = 7.12 kbytes/second

14. MQTTClient_SSL_LAN8720 on BLACK_F407VE with LAN8720 Ethernet and STM32Ethernet Library

The terminal output of BLACK_F407VE with LAN8720 Ethernet and STM32Ethernet Library running MQTTClient_SSL_LAN8720 example

Start MQTTClient_SSL_LAN8720 on BLACK_F407VE with LAN8720 Ethernet & STM32Ethernet Library
EthernetWebServer_SSL_STM32 v1.6.0
You're connected to the network, IP = 192.168.2.138
Attempting MQTT connection to broker.emqx.io...connected
Published connection message successfully!
Subscribed to: STM32_Sub
Message Send : STM32_Pub => Hello from MQTTClient_SSL_LAN8720 on BLACK_F407VE
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_LAN8720 on BLACK_F407VE
Message Send : STM32_Pub => Hello from MQTTClient_SSL_LAN8720 on BLACK_F407VE
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_LAN8720 on BLACK_F407VE
Message Send : STM32_Pub => Hello from MQTTClient_SSL_LAN8720 on BLACK_F407VE
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_LAN8720 on BLACK_F407VE
Message Send : STM32_Pub => Hello from MQTTClient_SSL_LAN8720 on BLACK_F407VE
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_LAN8720 on BLACK_F407VE

15. MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE with LAN8720 Ethernet and STM32Ethernet Library

The terminal output of BLACK_F407VE with LAN8720 Ethernet and STM32Ethernet Library running MQTTClient_SSL_Complex_LAN8720 example

Start MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE with LAN8720 Ethernet & STM32Ethernet Library
EthernetWebServer_SSL_STM32 v1.6.0
You're connected to the network, IP = 192.168.2.142
Attempting MQTT connection to broker.emqx.io...connected
Published connection message successfully!
Subscribed to: STM32_Sub
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 6546
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 6546
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 11549
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 11549
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 16557
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 16557
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 21565
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 21565
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 26573
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 26573
Message Send : STM32_Pub => Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 31581
Message arrived [STM32_Pub] Hello from MQTTClient_SSL_Complex_LAN8720 on BLACK_F407VE, millis = 31581

16. AdvancedWebServer on NUCLEO_L552ZE_Q with W5x00 using Ethernet_Generic Library and custom SPI

Following is debug terminal output and screen shot when running example AdvancedWebServer on NUCLEO_L552ZE_Q, using W5500 Ethernet with Ethernet_Generic Library and custom SPI

Start AdvancedWebServer on NUCLEO_L552ZE_Q with W5x00 using Ethernet_Generic Library and custom SPI
Ethernet_Generic v2.7.1
EthernetWebServer_SSL_STM32 v1.6.0
[EWS] Default SPI pinout:
[EWS] MOSI: 22
[EWS] MISO: 25
[EWS] SCK: 23
[EWS] SS: 24
[EWS] =========================
Connected! IP address: 192.168.2.116
HTTP EthernetWebServer is @ IP : 192.168.2.116
.[EWS] String Len = 0, extend to 2048
......... .....

Debug

Debug is enabled by default on Serial. Debug Level from 0 to 4. To disable, change the ETHERNET_WEBSERVER_LOGLEVEL to 0

// Use this to output debug msgs to Serial
#define DEBUG_ETHERNET_WEBSERVER_PORT       Serial
// Use this to disable all output debug msgs
// Debug Level from 0 to 4
#define _ETHERNET_WEBSERVER_LOGLEVEL_       0

Troubleshooting

If you get compilation errors, more often than not, you may need to install a newer version of the board's core, applying Libraries' Patches, Packages' Patches or this library latest version.

Issues

Submit issues to: EthernetWebServer_SSL_STM32 issues

TO DO

  1. Bug Searching and Killing
  2. Support more non-compatible Ethernet Libraries such as Ethernet_Shield_W5200, EtherCard, EtherSia
  3. Add mDNS features.

DONE

  1. Add support to STM32F1,2,3,4,7 boards with 64K+ Flash.
  2. Add support to built-in Ethernet LAN8742A using STM32Ethernet library, for boards such as Nucleo-144 NUCLEO_F767ZI.
  3. Add support to Ethernet W5x00, using either Ethernet, Ethernet2, Ethernet3 or EthernetLarge library
  4. Add support to Ethernet ENC28J60, using EthernetENC or UIPEthernet library
  5. Add support to all STM32 boards (STM32F/L/H/G/WB/MP1) with 32K+ Flash.
  6. Add support to PROGMEM-related commands, such as sendContent_P() and send_P()
  7. Add TLS/SSL Client support to all STM32 boards (STM32F/L/H/G/WB/MP1) with 32K+ Flash.
  8. Add High-level HTTP (GET, POST, PUT, PATCH, DELETE) and WebSocket Client
  9. Add support to Ethernet LAN8720 using STM32Ethernet library, for boards such as Nucleo-144 (F429ZI, NUCLEO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG), Discovery (DISCO_F746NG) and STM32F4 boards (BLACK_F407VE, BLACK_F407VG, BLACK_F407ZE, BLACK_F407ZG, BLACK_F407VE_Mini, DIYMORE_F407VGT, FK407M1)
  10. Reduce usage of Arduino String with std::string
  11. Optimize library code and examples by using reference-passing instead of value-passing.
  12. Fix authenticate issue and compiler warnings caused by libb64
  13. Change licence from MIT to GPLv3
  14. Sync with SSLClient v1.6.11
  15. Use new Ethernet_Generic library as default for W5x00.
  16. Rewrite library and add example multiFileProject to demo for multiple-file project to fix multiple-definitions linker error
  17. Change from arduino.cc to arduino.tips in examples
  18. Add lib_ldf_mode = chain+ in platformio.ini
  19. Add support to any custom hardware / software SPI for W5x00 using Ethernet_Generic Library
  20. Add support to STM32L5 boards, such as Nucleo-L552ZE-Q

Contributions and Thanks

  1. Based on and modified from Ivan Grokhotkov's ESP8266WebServer
  2. OPEnSLab-OSU for OPEnSLab-OSU's SSLClient
  3. Thanks to Miguel Alexandre Wisintainer to help debug and test.
  4. Adrian McEwen for HttpClient Library on which the ArduinoHttpClient Library and this EthernetWebServer library are relied.
  5. Thanks to Marcel Stör to report issue Pull in OPEnSLab-OSU's SSLClient v1.6.11 #17 which was fixed in v1.4.5
igrr
⭐️ Ivan Grokhotkov
 OPEnSLab-OSU
⭐️ OPEnSLab-OSU
 amcewen
⭐️ Adrian McEwen
 tcpipchip
Miguel Wisintainer
 marcelstoer
Marcel Stör

Contributing

If you want to contribute to this project:

  • Report bugs and errors
  • Ask for enhancements
  • Create issues and pull requests
  • Tell other people about this library

License

  • The library is licensed under GPLv3

Copyright

Copyright (c) 2020- Khoi Hoang

About

EthernetWebServer_STM32 is a library for STM32F/L/H/G/WB/MP1 boards running WebServer using built-in Ethernet LAN8742A, Ethernet LAN8720, W5x00 or ENC28J60 shields. It now supports Ethernet TLS/SSL Client. The library supports HTTP/HTTPS GET and POST requests, provides argument parsing, handles one client at a time. It supports Arduino STM32F/L/H/G/WB/MP1 series with 32+ Kbytes of Flash, using built-in Ethernet (Nucleo-144: F429ZI, F767ZI, Discovery: STM32F746G-DISCOVERY), or ENC28J60, W5x00 Ethernet shields. Ethernet_Generic library is used as default for W5x00. Now W5x00 can use any custom hardware / software SPI

ethernetwebserver-librarystm32http-clientstm32f4stm32f7enc28j60lan8742alan8720w5x00nucleo-f767zinucleo-144websocketstcp-serversslssl-webclientssl-certificatesudp-clientethernet-genericcustom-spi

License:GNU General Public License v3.0

Languages

Language:C 77.0%Language:C++ 22.3%Language:Python 0.7%Language:Shell 0.0%