There are 0 repository under olimex topic.
A lot of Files of various Electronic Shit that I have collected over the years. Cheatsheet, Schematics, Pinouts, Pdf, and More... Enjoy it ;)
Measure an electrocardiogram (ECG) with an Arduino Uno and an Olimex-EKG-EMG-Shield and calculate the heart rate variability afterward.
Hardware and software for an opencpn-based chartplotter
A quick-start guide to setting up the PCEmulator example for the Olimex ESP32-SBC-FabGL
This example program, missing from the Olimex repository, provides a simple example using ESP-IDF 4.1 and better, of initializing the ethernet subsystem. There are many breaking changes in ESP-IDF 4.1, so a working example is very important.
A ZigBee sniffer based on STM32F4Discovery board and OLIMEX MOD-MRF24J40 radio module
An alternative to Elec Guru written in python using PyQt 5 UI Framework
program for olimex esp32 poe iso: reads temp from ds18b20 and sends to zabbix
Keil uVision 5 demo project for Olimex E407 STM32F4 board. It uses STM32 HAL library and FreeRTOS. The project was generated using STM32CubeMX. The demo just enables/disables the user LED from the board.
Collecting data from different sensors
Read and reset the u-boot 'bootcount' register on various ARM platforms
Boiler room control, manages house heating and hot water supply. Supports dual heat source at the same time. Cheap and weak source extended by powerful expensive one when needed. Directly controls furnace and valves. It is functional and works in my house.
C++ library for the LPC2378-STK board from Olimex
Demonstrates using a ‘Processing’ app (v4.x) with Swing components to display an electrocardiogram generated by an Arduino UNO with an Olimex EKG/EMG Shield.
Olimex A10 Image for home automation
Duino-Coin Miner on ESP32 with LAN
Firmware for a generic USB-to-CAN interface for performing firmware updates on CAN nodes, running the OpenBLT bootloader.
ESPHome basierte, automatisierte Alarmauslösung über einen http request bei Alarmierung eines Melders in einer LGRA Ladestation.
Portable CO2 monitor based on ATTiny85 and MH-Z19B sensor
iCE40HX8K-EVB-EXT to 4 PMOD port adapter.
A home weather station with internet connectivity