There are 0 repository under kl25z topic.
Pinscape Controller Config Tool. This is a Windows program that helps you set up the Pinscape Controller. The Pinscape Controller is firmware that runs on the KL25Z microcontroller board, providing I/O functions uniquely designed for virtual pinball cabinets.
Basic and Advanced experiments on NXP Freescale KL25Z Micro-controllers
A portable, low-cost oscilloscope for laboratory and educational usage.
LED music visualizer with NXP's KL25Z development board for Principles of Embedded Software, CU Boulder, 2020
This project has the FW code for a BMP280 temp sensor displaying data to an SSD 1306 display
This repo includes all labs from 1 to 6 including Assembly and C
Principles of Embedded Software Project 3, Logger, Profiler, SPI, UART
This repository consists of the course projects for ECEN 5813 Principles of Embedded Software
This repository consists of the course projects for ECEN 5803 Mastering Embedded Systems Architecture
SpaceWar is a mini-game that consists of a spaceship that must avoid colliding with asteroids, either by dodging or destroying them. The peculiarity of SpaceWar is that the ship is not controlled by keyboard or with a common joystick, but is controlled by an accelerometer. In my case, I used the accelerometer that comes included in the low cost development board FRDM-KL25Z.
SX-1278 LORA interfaced with Kinetis FRDM MCU board (baremetal and FreeRTOS options). NOTE: Setup is still under range tests!
Final project of Digital Computer Structure course.
This repo includes all labs about EEE 212 in Bilkent University. Two type of board are used in this repo. Firstly, Assembly codes were written for 8051. C codes were written for KL25Z.
A repo for Homework and Projects done throughout the coursework.
Project 2 - Principles of Embedded Software
A project to demonstrate the operation of a movement replicator robot based on embedded system FRDM-KL25Z from NXP (Freescale), while using FREEMASTER as a real-time monitoring software.
A low-cost, digital RPM meter was build in order to determine the magnitude and direction of rotation of the reaction wheels.
Different projects done in C++ with FRDM-KLZ25