An up-to-date listing of all the various Bluetooth Specification-related elements that are defined by our industry (Company IDs, Service UUIDs, Characteristic UUIDs and Descriptor UUIDs), that you can use instead of rolling your own.
Setup ChirpStack using Docker Compose
Home repository for .NET Core
Control DP-1200FB using an Arduino over the i2c bus
Language files for the Windows on Raspberry imager.
Firmware Repository for Semtech Modem
An open source ecosystem for IoT development :alien: Cross-platform IDE and unified debugger. Remote unit testing and firmware updates.
libs and code
Helps upload code to arduino without receiving errors for not being recognized on Ubuntu 18.04.
LuCI - OpenWrt Configuration Interface
OpenWrt / LEDE Project Node.js packages. up-to-date v4.x LTS, v6.x LTS and v8.x LTS
Python code to read status from the DPS-1200FB power supply
this is a openwrt luci theme
Alternative Luci theme for LEDE/OpenWRT
Linux distribution for embedded devices
This repository contains pre-compiled binaries of the current Raspberry Pi kernel and modules, userspace libraries, and bootloader/GPU firmware.
Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.6.12 including LeafLabs Maple and other generic STM32F103 boards. There is also Alpha suppory for GD32F103 based boards
Keil projects and libraries for STM32F4xx devices
3D Models of our products
Raspberry PI iC880A and LinkLab Lora Gateway Shield
A LoRa packet forwarder is a program running on the host of a LoRa gateway that forwards RF packets receive by the concentrator to a server through a IP/UDP link, and emits RF packets that are sent by the server.
A simple Board for SX1301 and SX1255 LoRa concentrator
Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.
Improvements made to the cheap T-962 reflow oven utilizing the _existing_ controller HW
Configuration for Connecting MultiTech Conduit to TheThingsNetwork