There are 2 repositories under modelica-library topic.
Free (standard conforming) library to model mechanical (1D/3D), electrical (analog, digital, machines), magnetic, thermal, fluid, control systems and hierarchical state machines. Also numerical functions and functions for strings, files and streams are included.
Free library for interfacing hardware drivers to Modelica models. There is support for joysticks, keyboards, UDP, TCP/IP, LCM, MQTT, shared memory, AD/DA converters, serial port and other devices.
:page_facing_up: Modelica library for data I/O of CSV, INI, JSON, MATLAB MAT, SSV, TIR, Excel XLS/XLSX and XML files
Free (standard conform) library that is intended to model electrical power systems at different levels of detail both in transient and steady-state mode.
The ExternalMedia library provides a framework for interfacing external codes computing fluid properties to Modelica.Media-compatible component models.
Free library for modelling and simulation of waste water treatment plants.
Free library that contains models with different complexity for simulating of electric energy storages like batteries (single cells as well as stacks) interacting with loads, battery management systems, loads and charging devices.
DroneLibrary: Multi-Domain Drone Modeling in Modelica with 3D visualization and FMU export configuration
Free (standard conforming) library for interface definitions and architectures for vehicle system modeling
Solar thermal power/fuel station performance simulation and optimisation using Modelica. Read a paper about our project: https://is.gd/solth
A Modelica library for photovoltaic system and power converter design
Modelica library for the simulation of photo voltaic cells and modules
HanserModelica is a Modelica open source educational library on electrical engineering with a particaular focus on polyphase electrical machines
Free library for modeling according to the principles of system dynamics of J. Forrester.
Dynamic modeling for business, economics, and ecology using the system dynamics approach
The OpenHPL is an open-source hydropower library that consists of hydropower unit models and is modelled using Modelica.
Free library providing different representations of linear, time invariant differential and difference equation systems, as well as typical operations on these system descriptions.
GeoJSON to Modelica Translator that is focused on district energy system design and analysis.
Modelica library for simulation of Clausius-Rankine (ClaRa) cycles in power plants
A semantics compliance suite for the Modelica language
📊 Extension of the CombiTable blocks of the Modelica Standard Library to additionally support cubic interpolation and reading of CSV, EPW (EnergyPlus Weather) and JSON files
Dymola library for transient simulation of coupled energy networks with high share of renewable energy (Uses ClaRa library)
A free library for modeling systems described by 1D partial differential equations.
Free library that provides a neural network mathematical model. (unlicensed)
Free library with some of the modeling and analysis capabilities of the electric circuit simulator PSPICE.
Defining requirements formally and checking them when simulating
Free (standard conforming) library to precisely define and synchronize sampled data systems with different sampling rates. It provides convenient to use blocks to utilize the new synchronous language elements introduced in Modelica 3.3.
Modelica library for convective heat transfer and pressure loss characteristics (Used for ClaRa library < 1.3.0)
Modelica library with advanced noise features building on Modelica_Noise
A Modelica library for thermal power generation system modelling
Modelica library with thermophysical properties of fluids and solids (Used for ClaRa library)
Free library for the dynamic simulation of a motorcycle, and tailored to test and validation of active control systems for motorcycle dynamics.
Free Modelica library for the purpose of simulation, analysis and control of bicycles and motorcycles (single-track vehicles, uses BondLib)