crbasic
There are 4 repositories under crbasic topic.
davidblakneymoore / CRBasic-Training
This repository contains several CRBasic scripts for teaching people how to code Campbell Scientific CR1000 dataloggers using the CRBasic coding language.
jpshanno / Event_Based_Sampling
Scripts to perform event-based sampling using an ISCO autosampler. Water levels are monitored via a Milone Technologies eTape and a Campbell Scientific datalogger is used to record water levels and trigger sampling.
Language:R 3wsular / EasyFlux-DL-CR3000
CR3000 datalogger program for Campbell open-path eddy-covariance systems, by @campbell-scientific
patricktokeeffe / crbasic-gas-calibrator
Gas analyzer calibration programs for CRBasic-series data loggers
Source code for the CO2 eddy covariance towers at R. J. Cook Agronomy Farm, a USDA ARS Long-Term Agroecosystem Research (LTAR) site
Language:Python 2Ian33 / CS-Trigger-Based-Email
Campbell Scientific CSBASIC Basic Event Based Email
CRBasic program to log four ATI sonic anemometers (Dr. Edburg Tukey Orchard Pheromone Experiment, 2012)
CRBasic program for logging single ATI sonic anemometer
Small scale plume dispersion study using single methane (CH4) analyzer and 3D anemometer
Source and docs for met tower at Asotin landfill, Lewiston-Clarkston Valley Formaldehyde Study (2016-2017)
Language:Jupyter Notebook 1This repository contains the CRBasic code to run heat-pulse sap flow sensors on a Campbell Scientific CR1000 datalogger. It records both heat-ratio-method and maximum-heat-ratio-method sap flow data. It also contains an R script for processing these data.
Language:R 0This repository contains CRBasic code for testing ZN12-T-2WP point dendrometers with a Campbell Scientific Measurement and Control Datalogger (CR1000).
Language:R 0GOA-UVa / apogeo
Custom support software for the CR300 and a specific setup with radiometers at Marambio antarctic base
Language:Python 0- 0
Liam-Eime / CR6-I2C-BNO-055
Repository for my work with a Campbell Scientific CR6 data logger in CRBasic for I2C communication with a BNO-055
0Repository for my work with a Campbell Scientific CR6 data logger with LoggerNet, for a micro-bridge logging and demonstration kit.
0Repository for my work with a Campbell Scientific CR6 data logger in CRBasic for UART communication with a TFmini Plus LiDAR
0Source code and docs for Urbanova Air Quality Reference Site in Spokane, WA
Language:Jupyter Notebook 0Datalogger program for anemometer tower, 2010 complex terrain study at Big Southern Butte, ID.
Source and docs for Fast Isoprene Sensor DAQ during Biogenic VOCs and Secondary Organic Aerosol at PROPHET 2014
Adaptation of the REACCHPNA eddyflux logger program for a vineyard in southeast Washington.
Language:PythonCRBasic program for GHG analyzer logger used during BioFiltro study summer 2022
CR1000 datalogger program to log various soil sensors and feed data to DAQFactory
Simple WXT520 weather station DAQ using CR1000
Syntax highlighting for the CRBasic language with LaTeX `listings` package
Language:TeXLocal weather station to support N2O flux trailer
Data acquisition for spring 2018 wheat pile dust emissions scoping study
Details on the whole-house air quality monitoring system used during the Indoor Air Quality & Climate Change study (2015-2018)
Simple teaching exercise involving CR1000 datalogger, CSAT3B ultrasonic anemometer and 034B vane-prop anemometer.
- reacchpna-eddyflux-tower
Source code for REACCH PNA eddy covariance CO2 flux towers
Language:Python
