Giters
panda-official
/
TimeSwipe
PANDA Timeswipe driver and firmware
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
3
Watchers:
5
Issues:
72
Forks:
5
panda-official/TimeSwipe Issues
PANDA_TIMESWIPE_GPIO_PULL
Updated
2 years ago
Pi undervoltage interferes with measurement frequencies
Closed
3 years ago
Comments count
1
Checking the ability to automatically configure the system (kernel / drivers) at startup using DT blob ATOM read from EEPROM
Closed
3 years ago
Setup driver settings from EEPROM information
Closed
3 years ago
Comments count
13
EEPROM i2c
Closed
3 years ago
Comments count
1
SPI settings are overwritten in the first board run
Closed
3 years ago
Comments count
2
Driver Resampling
Closed
3 years ago
Comments count
1
CalFW: Measure and send Result via SPI
Closed
3 years ago
Comments count
1
Measure Temperature
Closed
3 years ago
Comments count
1
EEPROM Documentation
Closed
4 years ago
Comments count
4
CalFW: ext. EEPROM R/W Test
Closed
4 years ago
Comments count
2
CalFW: Save Calibration Data
Closed
4 years ago
Comments count
6
Config file config_osx for OSX cross-platform build is not available
Closed
4 years ago
Comments count
2
build incompatible new firmware by default with no mention in READEM
Closed
4 years ago
Comments count
1
Warning about undefined behavior upon building on Mac
Closed
4 years ago
building driver on raspberry OS
Closed
4 years ago
Comments count
2
Native driver build on arm
Closed
4 years ago
Comments count
1
Documentation: missing cmake install
Closed
4 years ago
Comments count
2
Utilisation of new board features
Closed
4 years ago
Comments count
2
LED visualisation in current FW master
Closed
4 years ago
Comments count
3
CalFW: Copy current Production firmware and simplify
Closed
4 years ago
Comments count
5
CalFW: Calibration UI Test
Closed
4 years ago
DMSBoard: Implement Input SPI Protocol
Closed
4 years ago
DMSBoard: Implement Shift Register Abstraction Layer
Closed
4 years ago
Comments count
6
DataLogging example broken (won't build)
Closed
4 years ago
Documentation: !stoi! error not documented
Closed
4 years ago
Extend "adjust settings" function
Closed
4 years ago
Comments count
8
New Menu Structure
Closed
4 years ago
Comments count
15
Check Calibration Status
Closed
4 years ago
Comments count
4
Get Info
Closed
4 years ago
Comments count
5
Confusing value in firmware readme
Closed
4 years ago
Comments count
2
Create Emulator for Driver
Closed
4 years ago
Comments count
2
test
Closed
4 years ago
SPI communication sometimes takes too much time for reading sensor thread
Closed
4 years ago
Comments count
8
Integration of visualization optimization
Closed
4 years ago
Comments count
12
add analog out support
Closed
4 years ago
Comments count
41
Artifacts at the data begin
Closed
4 years ago
Comments count
5
Restructure driver output
Closed
4 years ago
Comments count
3
timeswipe for python or node-red on windows
Closed
4 years ago
Comments count
1
JSON parser sometimes fails in Data Logging example
Closed
4 years ago
Comments count
6
if timeswipe driver runs on raspberry and other one tries to connect: error message
Closed
4 years ago
Comments count
19
Read EEPROM from the driver and apply related settings
Closed
4 years ago
Comments count
7
DataLogging abnormal termination
Closed
4 years ago
Comments count
2
add sample rate setting
Closed
4 years ago
Comments count
11
driver and DataLogging example fails to build on macOS
Closed
4 years ago
Comments count
2
Add vector to TimeSwipe driver?!
Closed
4 years ago
Comments count
1
Add buffer output
Closed
4 years ago
Comments count
10
timwswipe for python or node-red on windows
Closed
5 years ago
Change SetBridge to SetSecondary
Closed
5 years ago
Comments count
2
Merge branch button_marker_blinkstart
Closed
5 years ago
Comments count
6
Previous
Next