Get Info
LeilaPiri opened this issue · comments
LeilaPiri commented
- rPi sends command js>{ "ARMID", "fwVersion"}
- SAM responds with Hardware Chip ID and firmware Version
Definition of Done
-
code for mentioned task is complete. examples & documentations are complete.
-
build chains are tested
-
corresponding branch is closed
-
merging is done
Ingo Kaiser commented
begodev commented
begodev commented
should be accessible via getSettings ("js>...") from the driver. js> works from the terminal
Phil Malessa commented
code checked, okay for me
Ingo Kaiser commented
tested on 10.0.0.12:
# ./rPIspi 0
SPI-0 Master
type the commands:
->
ARMID>\n
84BCA7B7-53385333-34202020-FF06212C