victronenergy / venus

Victron Energy Unix/Linux OS

https://github.com/victronenergy/venus/wiki

victronenergy/venus Issues

CAN-bus-bms LV protocol: Add generic connection info fields
Updated 2 months ago1
Adaptive brightness makes the backlight pulse
Closed 2 months ago4
Prevent restarting- or otherwise fix gui-v1 lockups
Updated 2 months ago
Reload instead of restart FlashMQ on bridge config changes
Updated 2 months ago2
dbus-parallel-bms: DVCC manual select not working properly
Updated 2 months ago
Multi RS: Add to battery measurements page
Updated 2 months ago1
Add maximum levels for gauges + capturing them for gui-v2
Closed 2 months ago25
gui-v1; backslash is missing from list of selectable characters
Closed 2 months ago4
alternator/Orion XS: NetworkMode is not correctly set with VE.Bus BMS v2
Updated 2 months ago
MQTT bridge from mosquitto to flashmq: keepalive not working
Closed 2 months ago1
Naming of CAN ports on Cerbo GX MK2
Closed 2 months ago2
issue with dbus or MQTT since Venus OS v3.3
Closed 2 months ago2
modbus tcp: Add registers for system input/output loads
Updated 2 months ago
Change settings around VRM / ssh tunnel / remote access
Updated 2 months ago2
Fix MQTT connections being refused when using empty username
Closed 2 months ago
Change venus-platform handling of the reboot path so that a (MQTT-) sender gets an ack
Updated 2 months ago
Add data and root partition full warning / notification.
Updated 2 months ago7
gui: battery menu: hide empty module level alarms and history menus
Updated 2 months ago
flashmq: add and make default an anonymous login option
Closed 2 months ago
Feature request - add metres/sec to the Pulse Meter menu in the Cerbo MK2
Updated 2 months ago
gui-v1: Notification icon always showing.
Closed 3 months ago
signalk: update venus plugin
Closed 3 months ago
Victron Venus missing favicon.ico for Remote Console on LAN
Updated 3 months ago
Multi-RS: Add dbus path for setting ess minsoc
Closed 3 months ago
Add network control to Venus-platform
Updated 3 months ago1
feeds has a stale v3.30 entry
Updated 3 months ago
Feature request: Optional Generator maximum runtime
Updated 3 months ago
Check that the Cerbo reset button resets the BLE pin
Closed 3 months ago1
RS485 multiple devices per port
Closed 3 months ago1
Cerbo GX: LEDs won't enable without rebooting
Updated 3 months ago2
Feature request: Warning if inverter switch is accidentally left in Charger Only
Updated 3 months ago
DVCC: Charge current limit can get stuck if BMS is momentarily disconnected or lost
Closed 3 months ago
Since system is read-only now: include serial-starter.rules on /data
Updated 3 months ago3
System setup - system status menu only for superuser?
Updated 4 months ago
Check smartshunt dc energy metering modes in all UIs
Updated 4 months ago
Heater device in dbus
Updated 4 months ago1
dbus_generator: faulty "Generator not detected at AC-In" notification
Closed 4 months ago13
dbus_generator: Implement new error scheme.
Updated 4 months ago
install qml files for gui-v2
Closed 4 months ago
Feature request Teltonika EYE SENSOR
Closed 4 months ago1
Alarm relay manual toggle is broken
Closed 4 months ago3
Display off timer not showing on gui-v1
Closed 4 months ago
Scheduled charging: add monthly option
Updated 4 months ago
Cerbo GX fails to find access points with automatic channel selection
Updated 4 months ago
Ruuvi alarms: add option disable them or make them happen only during the day?
Closed 4 months ago2
Bluetooth does not work on Raspberry Pi Zero 2W
Updated 4 months ago
Remove gui—v2 and its remote capability bit from vrmlogger
Closed 4 months ago3
Add dbus path to venus-platform for switching between percentages and units on the circular gauges
Closed 4 months ago3
FlashMQ runs away on certain DNS failures
Closed 5 months ago
Venus for Rasberry Pi 5
Updated 5 months ago