temperature-readings
There are 0 repository under temperature-readings topic.
turmoni / temp-probe-exporter
Export Prometheus data from 1-Wire temperature sensors, using an Arduino or Linux system
Language:Python 19gfvalvo / nonBlockingDS18B20
Convenience Wrapper for Dallas Temperature Library
Language:C++ 3MarkusJochim / Pi-Graphical-Temperature-Logger
A Python based Graphical Temperature Logger for the Raspberry Pi
Language:Python 2iamgroot42 / azure_mqtt
Server and RPi code to send temperature readings to IoT hub from a Raspberry Pi
Language:JavaScript 1vgropp / tempsense-exporter
prometheus-exporter and cli utility to read temperature from DS18B20 USB HID device
Language:Go 1Connorado9 / Wireless-Thermometer-Embedded-System
This project showcases the creation of an embedded system that reads temperature measurements, sends them via Bluetooth to a connected phone every 3.1 seconds, and switches between Celcius and Fahrenheit on command. Furthermore, an LED illuminates if the temperature exceeds 80 degrees F. Temperature readings are taken from the Si7021 sensor on the EFM 32 Pearl Gecko microcontroller board that the embedded system runs on. Drivers for the low energy timer that controls the timing between LED illuminations, a scheduler that maintains the lowest possible energy mode throughout all the applications, an interrupt driven I2C state machine that interfaces with the Si7021 sensor, a low energy UART that transmits to and receives from the bluetooth module, and a circular buffer that holds data going to peripherals while other applications are producing it were coded in C in Simplicity Studio to govern the project.
Language:C 0printsmith / Melzi-1.1.2-2.0-Temperature-Fluctuation-Fix
Fix for the Creality Melzi V1.1.2 board + extra goodies
0