rf433

There are 1 repository under rf433 topic.

• mathertel / rfcodes

  This is a RF signal encode and decode library that can be adapted to different protocols by specifying the timing conditions is a table. Can be used with 433 MHz and IR receivers and senders.

  arduinoarduino-libraryprotocolsrf-signalrf433
  Language:C++ 25

• mcsakoff / idf-esp32-rf433

  Library for reading RF codes in ESP-IDF (ESP32 and ESP8266)

  esp-idfesp32esp8266rf433gpio1527king-serry
  Language:C 18

• Achronite / node-red-contrib-energenie-ener314rt

  Node Red nodes for Energenie ENER314-RT Raspberry Pi board

  ener314-rtenergenienode-redrf433rf433mhz
  Language:HTML 12

• mcsakoff / idf-esp32-rf433-example

  Example of reading RF codes in ESP-IDF (ESP32 and ESP8266)

  esp-idfesp32esp8266rf433gpio
  Language:Makefile 9

• ikkentim / rpi-rftransmitter

  Tools for scanning, recording and playing RF signals on a Raspberry Pi. Made mostly for 433 mhz outlet switches

  raspberry-pirf433cpi
  Language:C 5

• k0rventen / magic-wand

  Be like Harry and control anything with your magic wand !

  arduinoharry-potterhome-automationrf433
  Language:C++ 4

• mattcontinisio / meat-curing-chamber

  Raspberry Pi meat curing chamber and mini IoT/home automation framework

  raspberry-piiotinternet-of-thingsmeat-curing-chambercpppythonrf433dhtflutterreactjs
  Language:Python 4

• HobbyTransform / Arduino-multi-channel-proportional-RC-transmitter-with-trimmer

  Full project details at: http://www.instructables.com/id/RC-Multi-Channel-Arduino-Proportional-Transmitter--1/

  arduinowirelessradioradio-frequencyradioheadvirtualwirerf433communicationsremote-controltransmitterreceivertrimmer
  Language:Arduino 3

• lrswss / oregon-v3-sensor-emulation

  Oregon v3 sensor emulators for Arduino Uno with FS1000A 433 RF-transmitter

  arduinorf433oregon-scientificsensoremulationthgn801uvn800wgr800pcr800
  Language:C++ 3

• vasililiev / esp32-433-receiver-home-assistant

  Home Assistant smart doorbell sensor for 433Mhz wireless doorbell

  doorbelldoorbellshome-assistanthome-automationhomeassistantrf433rf433mhzsmarthome
  3

• AdityaKshettri / Gesture_Controlled_Trolley_System

  This project is to design a trolley system which can be controlled just by using simple hand gestures. Our main motive behind this is to reduce the hard work of carrying heavy loads from one place to another.

  arduinorf433motor-driverhand-gestureaccelerometer
  Language:C++ 1

• electrocodeur / RC_CAR

  RC CAR PROJECT

  arduinoblebluetoothbluetooth-low-energyccarhc-05rf433ultrasonic-sensor
  Language:C++ 1

• mguardarini / arduino-project-rf433mhz

  This is a simple project with arduino unor3

  arduinoarduino-unosketchrf433rf433mhzuniversity-projectarduino-sketch
  Language:C++ 1

• piotrC4 / rf433-gateway

  ESP8266 based rf433 gateway to MQTT

  rf433mqtthomiegateway
  Language:C++ 1

• fcrespel / chacondio10

  Chacon DIO 1.0 transmitter

  chacondiorf433
  Language:C++ 0

• rbello / NanoWindVane

  A wind turbine made from an old fan, able to rise values ​​of embedded sensors (temperature, humidity, atmospheric pressure and wind speed) over RF 433 Mhz.

  arduino3d-modelsarduino-nanobatterypower-generatorrf433
  Language:Arduino 0

• Arejay23 / Hackathon_MCoders

  home automation-turning on and off lights using gesture

  homeautomationusingrf433ardinompu6050
  Language:C++

• fcrespel / chacon54662

  Chacon 54662 RCSwitch

  rcswitchchaconchacon54662rf433
  Language:C++

• fcrespel / rf433-api

  REST API to use an RF 433 MHz transmitter as a remote control

  apichacondiofastapirestrf433
  Language:Python

• Jason2866 / RF-Bridge-EFM8BB1

  Alternative Firmware for the Sonoff RF Bridge EFM8BB1 chip

  tasmotatasmota-devicerf433
  Language:C

• ndsh / bioticExplorers

  Biotic Explorers Library

  arduinophysical-computingservooled-display-ssd1306rf433tca9548ahfk-bremenbiotic-explorers
  Language:C++

• unseen1980 / IoT-ParkingFinder

  Detect if a parking space is occupied

  arduinotypescriptnodejsangularrf433
  Language:TypeScript