There are 2 repositories under luftdaten topic.
An environment monitor based on a Raspberry Pi Zero W, a Pimoroni Enviro+ and a Plantower air quality sensor to monitor, display and report on air particles, gases, temperature, humidity, noise and air pressure.
HomeBridge module for the DIY luftdaten.info particulates sensor. See http://luftdaten.info how to build your own
Acquire and process live and historical air quality data without efforts. Filter by station-id, sensor-id and sensor-type, apply reverse geocoding, store into time-series and RDBMS databases, publish to MQTT, output as JSON, or visualize in Grafana. Data sources: Sensor.Community (luftdaten.info), IRCELINE, and OpenAQ.
A complete kit for building a Air Quality meter for the Luftdaten.info project
ioBroker adapter to get the sensor values of your local or any remote luftdaten.info sensor into ioBroker
interactive Air-Quality map showing Irceline and luftdaten data
Scientific research of the data quality and intensity of the project luftdaten.info
Watches luftdaten.info particulates sensors and sends E-Mails if measurements exceed thresholds
Climate Monitor showing PM10 and PM2.5 Levels in Sheffield
A MagicMirror² Module to display your air quality sensor data
Bridge software for receiving airborne particulate matter measurements from TheThingsNetwork and forwarding them to sensor.community and opensensemap
A pcb that simplifies the assembly of a luftdaten/influencair sensor
This QuickApp reads the PM2.5, PM10 values directly from a sensor somewhere in this world. That sensor doesn't have to be your sensor, any sensor can be used, just find one in your neighborhood. For locating a sensor(ID) in your neighborhood see: https://sensor.community/en/
Python API for interacting with luftdaten.info
A fine dust sensor based on ESP8266, RFM95W, DHT22, HPM sensor
Create simple HTTP Server to receive Data from Sensors (https://luftdaten.info) and Publish these data separated for each value to your MQTT-Broker
Stay informed on air quality with this simple bot, which posts real-time updates from a configurable sensor on the https://sensor.community network to Twitter and Mastodon. See it in action by following #feinstaub and #cannstatt on https://mastodon.online/@aschuma or https://twitter.com/twaschuma
This QuickApp reads the PM2.5, PM10, Temperature and Humidity values directly from a sensor. With this sensor you can measure air quality yourself. This QuickApp will send notifications when PM2.5 or PM10 readings reach a breakpoint.
TTGO Paxcounter mit Feinstaubsensor SDS011 und BME280
Receive a notification if the respirable dust exceeds a limit
3D printed version of a Sensor.Community Air Sensor enclosure.
Make prometheus collect temperature, pressure and PM metrics from your airrohr station
Server for receiving air quality data from a sensor.community sensor and writing it to InfluxDB and Home Assistant
PSE Thema "Anwenderorientierte Nutzerschnittstelle für Luftqualitätsdaten" Pflichtenheft
Raspberry Pi project that shows the health levels of PM2.5 and PM10 sensor readings from a Luftdaten air quality sensor
Microflo firmware for luftdaten.info air quality sensors
UNMAINTAINED AND PROBABLY NOT WORKING ANYMORE. Airrohr sensor lower boundary predictions (work in progress)
Python/Raspberry Pi example with DFRobot SEN0177 PM2.5 laser dust sensor
Open Source Air Quality Monitoring
SPS30 with Feather Lora 32U4 connected to TTN & Luftdaten
A simple nodejs based service to consume api calls from local luftdaten sensors and publish them as mqtt data