load-cell
There are 2 repositories under load-cell topic.
sparkfun / HX711-Load-Cell-Amplifier
A breakout board for the HX711 load cell weight measuring amplifier
Language:C++ 148An open source board for load cell reading and configuration based on the HX711 and ATmega328.
Language:C++ 56endail / hx711-pico-c
Implementation of single and multiple HX711 use via RP2040's state machine
Language:C 29- Language:C++ 21
An Arduino library to interface with load cells using the Qwiic interface and the NAU7802.
Language:C++ 19- hx711Language:C++ 18
yasir-shahzad / NAU7802
A linux library to interface with load cells using NAU7802.
Language:C++ 18A scale API for a Raspberry Pi Pico (RP2040) using the hx711-pico-c library.
Language:C 17- Critical-Force
OddgitHub / Critical-Force
Software to measure climbing specific finger strength measures, such as Critical Force.
Language:Python 17 A Raspberry Pi Library to interface Avia Semiconductor HX711 24-Bit Analog-to-Digital Converter (ADC) for Weight Scales
Language:C++ 17MicroPython implementation of HX711 use via RP2040's state machine
Language:Python 11- hx711-rpi-py
Python bindings for Raspberry Pi HX711 C++ Library
Language:Python 9 A PCB to combine four individual strain gauges or load sensors into the standard wheat bridge configuration and 4-color wiring found on load cells.
Language:Eagle 7GatCode / ScaleStabilizer
A library to stabilize load cell readings
Language:C++ 5- Language:Rust 5
- Language:C++ 5
Poduzov / HX711-Pi4j
HX711 Load cell Raspberry Pi Java class for Pi4j
Language:Java 5mrheltic / Bilancia-SaT
Scale with a strain gauge and an HX711, 3d printed and calibrated
Language:TeX 4BlueMoon73 / SciolyDetectorBuilding2023
Design for the science olympiad detector building device (2022-2023 season)
Language:C++ 3Flexsidee / weight-monitoring-system
Web based weight monitoring system using esp8266.
Language:C++ 3- triaxial-loadcell-breakout
Scottapotamas / triaxial-loadcell-breakout
Breakout board to sample 3-axis load cells with I2C interface
Language:HTML 3 Solla / IMADA_LoadCell_3rdPartyApplication
A 3rd party software for IMADA Load Cells. Capable of recording force 2000Hz with a protocol for time-synchronization.
Language:C# 3- Language:Arduino 3
An I2C based interface to load cells and other wheatstone based strain gauges.
luni64 / TeensyLoadcell
Library to readout standard loadcells with the internal ADC/PGA of the Teensy 3.2
Language:C++ 2SimonWaldherr / hx711go
Golang package to interface hx711 load cell amplifier
Language:Go 2- Language:C++ 1
billypilgrim22 / DeepWeight
DeepWeight automates the manual billing process by using a load cell to measure weight, USB camera to capture image, predict fruit type using a deep learning model and printer to print a receipt.
Language:Jupyter Notebook 1cadu-miranda / Prateleira-Inteligente
Trabalho de Conclusão de Curso: Protótipo de Prateleira Inteligente com Arduino.
Language:C++ 1ElTopollillo1990 / openScaleProject
Weight scale using Sparkfun's OpenScale
Language:C++ 1- sweets_box
H3wastooshort / sweets_box
a box that screams at you when taking to many sweets
Language:C++ 1 - Language:C 1
Romes8 / powder_dispenser
Powder-dispenser. School project 2020 - third semester
Language:C++ 1- Weight-Measurement-System
talhatallat / Weight-Measurement-System
A load cell measures the weight using strain gauges. The difference between the length of the load cell at one side of the cell will help in determining the weight that is applied to it. This will change the output impedance. The output impedance is integrated into a Wheatstone bridge where the difference of the output impedance determines and controls the output voltage of the circuit.
Language:C++ 1 TSBrownie / Arduino-Wemos-D1-Seismometer-Load-Cell-v1.0
Arduino Wemos D1 basic seismometer. Creates SD card file, opens, writes, prints out. Tested with 64GB SD. Takes reading when values above / below set limits. XFW-HX711 Load Cell A2D. RTC DS1307. WeMos Micro SD Shield. IDE Info = WeMos D1R1 (ESP8266 Boards 2.5.2), upload 921600, 80MHz, WeMos D1R1 Boards 2
Language:C++ 1
