There are 1 repository under canbus-communications topic.
A WEB Based OBDII Dongle Platform using the ESP32 WROVER Module
Raspberry Pi Pico MCP2515 CAN-Bus Interface Library
Trionic 5/7/8 CANbus flasher with J2534 support
Extension for PHP to interface efficiently with a Controller Area Network (CAN bus) 2.0A / 2.0B
Repositorio con el diseño de un BMS y una batería como TFM
Observable can bus driver, created to speed up development and to provide callbacks to canbus data
A breakout board of MCP25625 for Can BUS communication.
An esp32 used as a2dp sink attached to the bmw canbus for steering wheel controls
Command line interface for the Peugeot 207 Confort CAN Bus (And others)
Development of (BMS) battery management system for MSD700 vehicle powered by Toshiba SCiB Battery
Firmware de equipo configurador que recibe los datos por serial y comunica con el PC y configura el BMS
contributed to the development of the communication interface and software architecture for a groundbreaking cubesat satellite project known as IONSAT. This innovative cubesat operates in a very low orbit and is a collaborative effort involving ONERA, CNES, ThrustMe, and École Polytechnique.
Firmware para un BMS basado en ATMega328P, MCP2515 y LTC6804
2022 FCU HackerSir, Used to demonstrate communication between can buses.
Codes i use to make my Verification Prototipe for ECUs with CAN BUS