Christian Adams's starred repositories
YubiKey-Guide
Guide to using YubiKey for GnuPG and SSH
BIGTREETECH-TouchScreenFirmware
support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70
NopSCADlib
Library of parts modelled in OpenSCAD and a framework for making projects
arduino-lmic
LoraWAN-MAC-in-C library, adapted to run under the Arduino environment
ic880a-gateway
Reference setup for iC880a gateways running The Things Network
Multiplayer
Zetrith's Multiplayer mod for RimWorld
gCodeViewer
a visual web based gcode analyzer
prusa_profiles
Repo to store profiles for Prusa 3D Printers
prusaowners
General project for the wiki and other things related to this group.
weather-underground-icons
Weather Underground Icons ( PNG & SVG )
ArduinoUniqueID
Arduino Library to gets the Manufacture Serial Number from the Atmel AVR, SAM, SAMD, STM32, and ESP Microcontroller.
lora-serialization
LoraWAN serialization/deserialization library for The Things Network
PaperiNode
Selfpowered E-Paper Node for LoRaWAN
PiGI
The PiGI is built as a ready-to-go drop-in module for the Raspberry Pi to transform it into a versatile geiger counter to measure/monitor radioactivity. It will generate the required high voltage the counting tubes need to operate and it will safely invert the counting impulses to a falling edge, detectable by a GPIO Pin on the PI. But it's also designed in such a universal way in order to be very hackable. Basically it can be connected to any processing system that can detect falling edges.
g933-utils
Configure and control the Logitech G933 wireless headset (and some others)
systemd-wireguard-refresh
refresh systemd wireguard dns name
trigorilla-pro
Information about the 32bit mainboard which ships with newer versions of the Anycubic i3 Mega
stm32_bitbang_i2c
Library to implement I2C on any GPIO for STM32 MCU's. (I2C implemented in software)
ic880a-backplane
Backplane to connect an iC880A-SPI concentrator board to a Raspberry Pi, with protection against reversed power supply and voltage spikes, a temperature / humidity sensor, a step-down voltage regulator, an ADC to measure supply voltage, a general purpose button, three general purpose LEDs and a connector for a 5V DC fan.
ESP8266-TuringPi-WiFi-Controller
A WiFi Controller for the Turing Pi V1 cluster board connected via the onboard I2C bus.