nophead / NopSCADlib

Library of parts modelled in OpenSCAD and a framework for making projects

nophead/NopSCADlib Issues

[Feature request] Add SHF shaft support brackets
Updated 12 days ago
[Feature request] Add KFL Miniature Flange Housing Units
Updated 13 days ago1
[Feature proposal] Add 2nd arg to geared_stepper() allowing to turn its motor shaft
Closed a month ago1
ERROR: Parser error: syntax error in file splines.scad, line 96
Closed 3 months ago2
Generate DXF of a sheet modelled in 3D
Closed 6 months ago8
Collaboration on Web Based Hosting of This Project with Real-Time Openscad
Closed 6 months ago1
Build unnecessarily compares tiny (_tn) images
Closed 6 months ago3
Should polyholes and teardrops be in core?
Closed 6 months ago4
Function to rotate the nut so that the thread would align on the screw
Closed 6 months ago4
What is the proper way to add additional pulley, belt, etc. definitions
Updated 6 months ago5
Countersink holes in sheet material
Closed 7 months ago1
[Feature request] Standard PC Motherboards
Updated 7 months ago5
Adafruit Feather 405 Module
Closed a year ago2
SBR16 rails
Closed a year ago2
JST XH Connectors left out of BoM
Closed a year ago4
Python error: too many values to unpack (expected 2)
Closed a year ago8
Script error
Closed a year ago7
[ Feature Request] Extrusions/Brackets: Provide support for other screw/nut sizes
Closed a year ago5
Issue using vitamins/extrusion_brackets.scad>
Closed a year ago3
[Feature Request] Please add oscillator crystals
Closed a year ago4
[Feature Request] Specify extrusion slot count
Updated 2 years ago2
Countersunk hole for 3D printed part?
Closed 2 years ago3
Best way to support internal threads?
Closed 2 years ago4
Horicylinder too tall and doesn't compile at layer_hight=2 extrusion_width=0.5
Updated 2 years ago3
Size of intermediate png files (4096x4096) too large?
Closed 2 years ago8
Suggestion - remove vitamin array from each vitamins.scad file and move to test
Updated 2 years ago27
[Feature Request] Add USB mini A socket
Closed 2 years ago6
How to make a screw knob for M6 or larger
Closed 2 years ago7
Suggested improvement to idler pulley naming convention
Updated 2 years ago8
Suggestion: add parameter to explode() to make yellow guide line optional
Closed 2 years ago1
Suggested improvement to NEMA stepper motor naming convention
Closed 2 years ago2
Ball bearings should be called cartridge bearings
Closed 2 years ago4
feature request: wing nuts
Closed 3 years ago2
make_all is now not generating anything
Closed 3 years ago8
Feature Request - produce bom.csv as part of the build
Closed 3 years ago17
Suggestion for improvement to variants and their assembly instructions
Closed 3 years ago18
No more updates to NopSCADlib from tomorrow
Closed 3 years ago14
tests/stepper_motors.scad fails on OpenSCAD version 2019.05
Closed 3 years ago3
Possible typo in leadnut.scad
Closed 3 years ago3
support on parts
Closed 3 years ago2
MGN7C and MGN9C carriage dimensions possibly slightly incorrect
Closed 3 years ago3
PR
Closed 3 years ago2
2021.01
Closed 3 years ago2
writing-mode: vertical-rl not honoured in readme.md Parts List table
Closed 3 years ago6
feature request: change log
Closed 3 years ago4
feature request: make clean
Closed 3 years ago8
Not all directories created when building variant from scratch
Closed 3 years ago3
error when make_all
Closed 3 years ago1
feature request: parallelize make_all
Updated 3 years ago
how to use pose? and zoom?
Closed 3 years ago8