gihadmecha / Fire_System

Established the system to measure the temperature of the environment and detect smoke levels, enabling the timely activation of water sprinklers and alarms in response to a potential fire hazard.

Fire_System

Fire.System.mp4

to measure the environment's temperature and detect smoke levels, enabling the timely activation of water sprinklers and alarms in response to a potential fire hazard.

Demo: https://youtu.be/VXHsIy-3uFs?si=8t_whU7VJDfkJ1_V

How does it work

It gets the environment's temperature using a Temperature Sensor, and the smoke level using a Smoke Sensor and puts them on the Display Screen.

• Normal State:
  • If temp < 45 °C
• Heat State:
  • If temp > 45 °C
  • The yellow light is on
• Fire State:
  • If temp > 45 °C and smoke level > 50
  • The Red light is on
  • Sprinkler sprays water

Enter the password feature:

You can't exit Fire State until you fix the issue and enter the confirmation password.

Change the password feature:

If you want to change the password, you must enter the current password.

Hardware

• atmega32
• LM35
• MQ-2
• Servo
• Stepper Motor
• ln298
• Keypad 4x4
• LCD 16x2
• Leds
• Resistors

Peripherals

• EEPROM
• TIMER
• ADC
• DIO

Make sure you have installed

• ATMEG32 MCAL layer.
• HAL layer.
• Defined Data Types.
• atmega32 memory.
• utilities.

Softwares you should install

• Microchip Studio for AVR
• Proteus