ROBOTIS-GIT / OpenCR-Hardware

BOM, Circuit and PCB Gerber of OpenCR

Home Page:http://emanual.robotis.com/docs/en/parts/controller/opencr10/

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

OpenCR: Open Source Control Module for ROS

OpenCR (Open-source Control Module for ROS) is developed for ROS embedded systems to provide completely open-source hardware and software.

OpenCR-Hardware

Everything about the board; Schematics, PCB Gerber, BOM and the firmware source code for the TurtleBot3 and OP3 are free to distribute under open-source licenses for users and the ROS community. The STM32F7 series chip inside the OpenCR1.0 board is based on a very powerful ARM Cortex-M7 with floating point unit. The development environment for OpenCR1.0 is wide open from Arduino IDE and Scratch for young students to traditional firmware development for the expert.

ROBOTIS e-Manual for OpenCR

Open Source related to OpenCR

Documents and Videos related to OpenCR

Tools for Hardware of OpenCR

  • Schematic
    • OrCAD Capture 16.6

About

BOM, Circuit and PCB Gerber of OpenCR

http://emanual.robotis.com/docs/en/parts/controller/opencr10/