PCrnjak / PAROL6-Desktop-robot-arm

BOM, STL files and instructions for PAROL6 3D printed robot arm

PAROL6-Desktop-robot-arm

Join Discord community!

PAROL6 is a high-performance 3D-printed desktop robotic arm. The design approach of PAROL6 was to be similar to industrial robots in terms of mechanical design, control software, and usability. Control software, GUI, and robots STL files are open-source.

How to build / Where to buy?

You can buy the PAROL6 robotic arm on our website: https://source-robotics.com

If you want to Source all the parts yourself and build your own follow these steps:

• Source all the parts from the BOM
• Follow Building instructions to assemble your robot
• Follow DOCS to get your robot up and running.

Documentation:

• Official website
• Commander software ------ Minimal hardware specs!
• Building instructions
• BOM
• DOCS
• Video tutorials

More about PAROL6

• Forum
• Blog
• Youtube
• Hackaday
• Instagram
• DOCS
• Twitter

Liability

1. The software and hardware are still in development and may contain bugs, errors, or incomplete features.
2. Users are encouraged to use this software and hardware responsibly and at their own risk.

Support

The majority of this project is open source and freely available to everyone. Your assistance, whether through donations or advice, is highly valued. Thank you!

Project is under GPLv3 Licence