Hameem1 / Indoor-Localization-using-CellLocate

Makes use of the CellLocate feature for indoor position estimation without GPS. When GPS is available, the location is calculated using CellLocate and GPS data in a hybrid configuration.

Indoor Localization using CellLocate®

Abstract

This code is designed to run on the Ublox C027- LISA-U200 board and makes use of the CellLocate feature for indoor position estimation without GPS. When GPS is available, the location is calculated using CellLocate and GPS data in a hybrid mode.

---

Installation

1. $sudo apt-get install gdb-multiarch gcc-arm-none-eabi build-essential binutils-arm-none-eabi openocd

2. sudo apt-get install python2.7 python-pip git mercurial

   pip install pip==8.1.1

3. $ sudo pip install mbed-cli

4. Go to the directory where you want the project to be and import the git repo and:

   $ mbed import https://github.com/Hameem1/Indoor-Localization-using-CellLocate.git

5. Plug in the mbed board and then;

   $ mbed detect

   $ mbed toolchain GCC_ARM

   $ mbed target UBLOX_C027

6. Change the SIM card configuration in main.cpp

7. To compile the code and deploy to the board;

   $ mbed compile -f

   (generates the .bin file in the BUILD folder)

   -f causes the .bin file to be uploaded to the board as soon as it’s compiled.