CircuitSetup/Split-Single-Phase-Energy-Meter Issues
Problem in reading KWH in ATM90E32
Updated 1Installation help
Updated 3volt is reading 0.001000
Closed 1Negative values?
Closed 1fuse suggestion
Updated 1FR: Add ClientId to MQTT
UpdatedCalibration emonESP from Russia
Closed 1Use another CT sensor.
Updated 1CT Clamps not reading anything
Updated 1Voltage measurement under load?
Closed 1EmonESP fork
Closed 3No AC adapter available
Closed 4Board Compatability
Closed 1fried split circuit v1.4 rev 2
Closed 2Power is showing negative now?
Closed 7Verifying Power Factor values
Closed 4No readings from CT2
Closed 3No Hardware
Closed 5Voltage calibration value
Closed 1